Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 76 dokumen yang sesuai dengan query
cover
Muchammad Zulfikar Ramadhan
"Dalam melakukan diagnosa terhadap gejala penyakit paru-paru para dokter biasanya menggunakan stetoskop sebagai alat bantu dalam melakukan proses auskultasi. Namun proses auskultasi yang dihasilkan oleh dokter sering berbedabeda hal ini dikarenakan adanya perbedaan kepekaan telinga dan pengalaman dokter yang bersangkutan. Dengan perancangan system instrumentasi untuk identifikasi dan analisis suara paru-paru menggunakan dsp tms320c6416t ini diharapkan akan membantu dalam menganalisa suara paru-paru terutama fokus pada suara normal dan suara adventitious. Interpretasi grafik dalam bentuk spectrogram dan scalogram akan mempermudah analisa suara paru-paru sekaligus mengatasi masalah keterbatasan pendengaran dalam proses auskultasi. Metode yang digunakan dalam analisa suara paru-paru meliputi transformasi fourier yang kemudian berkembang menjadi short time fourier transform (STFT) hingga tingkat lanjut seperti Wavelet transform digunakan sebagai tool untuk analaisa suara paru-paru. Upaya filtering dengan filter digital agar dapat memperoleh suara paru-paru yang sebenarnya terletak pada frekuensi antara 100-2000 Hz.

In diagnosed the symptoms of lung disease, doctors usually use a stethoscope as an aid in the process of auscultation. However, the interpretation of auscultation process by a doctor is not usually same with another doctor. The reason has based on the differences in the sensitivity of the ear and the experience. Using tms320c6416t dsp as instrumentation system for identification and analysis of lung sound is expected to assist in analyzing lung sound that focus on normal and adventitious sounds. Interpretation of graphs in the form of the spectrogram and scalogram will simplify the analysis of lung sounds as well as minimize or avoid the limitations of hearing problems in the process of auscultation. The method used in lung sound analysis include Fourier transformation that developed into a short-time Fourier transform (STFT) till the next stage such as the wavelet transform that used as a tool for lung sounds analysis. Digital filter is used on the instrumentation system to distinguish lung sound signal from noise signal that have frequency between 100 and 2000 Hz."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2012
S42078
UI - Skripsi Open  Universitas Indonesia Library
cover
Arif Budiman
"Telah dilakukan pengembangan sistem registrasi 2D/2D untuk verifikasi posisi pasien radioterapi berbasis bahasa C++ dengan tiga metode yaitu rigid transform, Viola-Wells mutual information dan Mattes mutual information. Implementasi sistem registrasi citra otomatis yang dikembangkan menggunakan data sekunder 34 pasien kanker nasofaring didapatkan hasil koreksi maksimum untuk rigid transform sebesar (2,79 ± 0,41) mm, Viola-Wells mutual information sebesar (2,77 ± 0,64) mm dan Mattes mutual information sebesar (2,69 ± 0,68) mm. Namun dalam proses uji validasi menggunakan fantom CIRS tidak berhasil dilakukan karena kontras citra EPID setelah melalui tahapan pre-processing tidak jauh berbeda.

Has been developed registration system 2D/2D for verifying patient’s radiotherapy position based on C++ languages which consist of 3 registration methods such as rigid transform, Viola-Wells mutual information and Mattes mutual information. Implementation of automatic image registration system that has been developed using secondary data from 34 Nasopharyngeal Cancer patients are obtained maximum correction at about (2,79 ± 0,41) mm, (2,77 ± 0,64) mm and (2,69 ± 0,68) mm for rigid transform, Viola-Wells mutual information and Mattes mutual information, respectively. However in the validation test using CIRS phantom is not success because the image contrast of EPID after pre-processing was not significantly different.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S58654
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rahmi Febriani
"[ABSTRAK
Hroksiapatit merupakan jenis biomaterial sintetis yang mempunyai fasa yang paling stabil dibandingkan dengan senyawa kalsiun fosfat lainnya, selain itu hidroksiapatit memiliki tingkat kemiripan yang tinggi dengan tulang, sehingga hidroksiapatik banyak diaplikasikan sebagai bone graft sintetis. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh waktu sintering terhadap kemurnian kristal hidroksiapatit yang dihasilkan. Hidroksiapatit dari prekursor kimia CaCO3 dan (NH4)2HPO4 disintesis dengan menggunakan metode hidrotermal pada temperatur 150oC dan 300oC. Hasil dari sintesis hidroksiapatik dikarakterisasi dengan menggunakan X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), dan Energy Dispersive Analysis X-Ray (EDX). Hasil karakterisasi XRD memperlihatkan intensitas tertinggi rata-rata berada pada sudut 2θ yaitu, 25.898o, 31.789o, 32.216o, 32.922o, 46.729o, dan 49.524o. Hasil dari SEM memperlihatkan morfologi dari sampel bebrbetuk nanoroot dan hasil dari EDX menunjukan rasio Ca/P sebesar 1.8.
ABSTRACT
Hydroxyapatite is the most phase-stable syntetic biomaterial compared to another calcium phospate material. Hydroxyapatite also has high similarity with bone which make it has wide application as syntetic bone graft. Purpose of this research is to study the effect of sintering time towards hydroxyapatite crystal?s purity. Hydroxyapatite made from chemical precursor CaCO3 and (NH4)2HPO4 was synthesized using hydrothermal method on 150oC and 300oC. Synthesized hydroxyapatite was characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis X-Ray (EDX). The result of characterization showed that highest average intensity on 2θ were: 25.898o, 31.789o, 32.216o, 32.922o, 46.729o, and 49.524o.;Hydroxyapatite is the most phase-stable syntetic biomaterial compared to another calcium phospate material. Hydroxyapatite also has high similarity with bone which make it has wide application as syntetic bone graft. Purpose of this research is to study the effect of sintering time towards hydroxyapatite crystal?s purity. Hydroxyapatite made from chemical precursor CaCO3 and (NH4)2HPO4 was synthesized using hydrothermal method on 150oC and 300oC. Synthesized hydroxyapatite was characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis X-Ray (EDX). The result of characterization showed that highest average intensity on 2θ were: 25.898o, 31.789o, 32.216o, 32.922o, 46.729o, and 49.524o.;Hydroxyapatite is the most phase-stable syntetic biomaterial compared to another calcium phospate material. Hydroxyapatite also has high similarity with bone which make it has wide application as syntetic bone graft. Purpose of this research is to study the effect of sintering time towards hydroxyapatite crystal?s purity. Hydroxyapatite made from chemical precursor CaCO3 and (NH4)2HPO4 was synthesized using hydrothermal method on 150oC and 300oC. Synthesized hydroxyapatite was characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis X-Ray (EDX). The result of characterization showed that highest average intensity on 2θ were: 25.898o, 31.789o, 32.216o, 32.922o, 46.729o, and 49.524o., Hydroxyapatite is the most phase-stable syntetic biomaterial compared to another calcium phospate material. Hydroxyapatite also has high similarity with bone which make it has wide application as syntetic bone graft. Purpose of this research is to study the effect of sintering time towards hydroxyapatite crystal’s purity. Hydroxyapatite made from chemical precursor CaCO3 and (NH4)2HPO4 was synthesized using hydrothermal method on 150oC and 300oC. Synthesized hydroxyapatite was characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis X-Ray (EDX). The result of characterization showed that highest average intensity on 2θ were: 25.898o, 31.789o, 32.216o, 32.922o, 46.729o, and 49.524o.]"
Universitas Indonesia, 2015
S62144
UI - Skripsi Membership  Universitas Indonesia Library
cover
Titi Panilia
"[ABSTRAK
Hidroksiapatit (HA) mempunyai peran penting dalam bidang medis karena komposisi kimia dan strukturnya yang mirip dengan tulang manusia. Material ini disintesis melalui metode hidrotermal dengan prekusor Ca(NO3)2, CaO dan NH3PO4. Variasi temperatur hidrotermal pada 150 ̊C dan 300 ̊C, temperatur sintering pada 900 ̊C selama 3 jam. Endapan yang diperoleh diuji dengan XRD dan SEM-EDX. Morfologi partikel hasil karakterisasi SEM berbentuk batangan memanjang dan melingkar teraglomerasi dan hasil uji EDX menunjukkan rasio Ca/P yang lebih besar dari 1.67. Uji XRD menunjukkan adanya fasa kalsium difosfat, fluorapatit dan apatit karbonat tipe- A di dalam endapan yang meningkatkan rasio Ca/P.
ABSTRACT
Hydroxyapatite (HA) posseses significant role in medical application due to its similarity in chemical and structure to human bones. This material was synthesized through hydrothermal method using Ca(NO3)2, CaO and NH3PO4. Hydrothermal temperature varied on 150 ̊C and 300 ̊C, sintering temperature on 900 ̊C for 3 hours. Sample was characterization by XRD and SEM-EDX. Morphology observed by SEM is agglomerated round- spherical- shape particle with Ca/P ratio more than 1.67 measured by EDX. Calcium diphospate, fluorapatite and carbonated type- A presence is observed by XRD.;Hydroxyapatite (HA) posseses significant role in medical application due to its similarity in chemical and structure to human bones. This material was synthesized through hydrothermal method using Ca(NO3)2, CaO and NH3PO4. Hydrothermal temperature varied on 150 ̊C and 300 ̊C, sintering temperature on 900 ̊C for 3 hours. Sample was characterization by XRD and SEM-EDX. Morphology observed by SEM is agglomerated round- spherical- shape particle with Ca/P ratio more than 1.67 measured by EDX. Calcium diphospate, fluorapatite and carbonated type- A presence is observed by XRD., Hydroxyapatite (HA) posseses significant role in medical application due to its similarity in chemical and structure to human bones. This material was synthesized through hydrothermal method using Ca(NO3)2, CaO and NH3PO4. Hydrothermal temperature varied on 150 ̊C and 300 ̊C, sintering temperature on 900 ̊C for 3 hours. Sample was characterization by XRD and SEM-EDX. Morphology observed by SEM is agglomerated round- spherical- shape particle with Ca/P ratio more than 1.67 measured by EDX. Calcium diphospate, fluorapatite and carbonated type- A presence is observed by XRD.]"
Universitas Indonesia, 2015
S62145
UI - Skripsi Membership  Universitas Indonesia Library
cover
Armando Aldy Ruddyard
"ABSTRAK
Karbonat hidroksiapatit merupakan suatu jenis biomaterial yang memiliki kompatibilitas tinggi dengan tulang manusia. Tujuan penelitian ini adalah untuk mempelajari pengaruh suhu dan waktu sintering untuk mendapatkan karbonat hidroksiapatit yang disintesis dengan metode hidrotermal menggunakan CaCO3 sebagai salah satu komponen. Sampel hasil sintesis dikarakterisasi dengan Fourier-transform infrared spectroscopy, x-ray diffraction, dan scanning electron microscope. Hasil FTIR menunjukkan bahwa kandungan gugus CO3 pada sampel yang dihasilkan sebanding dengan kuantitas CaCO3 yang digunakan dalam sintesis. Hasil XRD menunjukkan bahwa kandungan karbonat apatit meningkat dan kandungan kalsit menurun dengan meningkatnya suhu dan waktu sintering. Kalsit tidak terlihat pada suhu sintering 900 ̊C dan waktu sintering 2 jam.

ABSTRACT
Carbonated hydroxyapatite is a biomaterial with high biocompatibility with human bone, moreso than regular hydroxyapatite, making it an acceptable synthetic bone graft material. The purpose of this research is to study the effect of sintering temperature and time on carbonated hydroxyapatite samples synthesized using the hydrothermal method with CaCO3 as one of its components. The samples are then characterized using Fourier-transform infrared spectroscopy, x-ray diffraction, and a scanning electron microscope. IR spectra show that the CO3 content in each sample is proportional to the amount of CaCO3 used in the synthesis of said samples. Diffraction patterns from XRD show an increase in apatite content and a decrease in calcite content as sintering temperature and time increases, with temperature increases having a stronger effect on the samples than time increases. Calcite disappears completely after sintering at 900 ̊C for 2 hours.
"
2016
S63451
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tutta Aurum Nisauf
"ABSTRAK
Penelitian ini diajukan dalam rangka melanjutkan penelitian sebelumnya oleh Wibowo (2015) tentang evaluasi Gamma Index (GI) untuk material homogen dan inhomogen dengan teknik IMRT. Penelitian ini dilakukan dengan menggunakan film gafchromic EBT3 sebagai detektornya. Kemudian, registrasi antara image dosis planar TPS dengan image hasil pengukuran menggunakan film dilakukan. Perencanaan radioterapi telah disiapkan sebanyak 5 pasien menggunakan modalitas FBCT, TPS Philips Pinnacle3, energi foton 6 MV, teknik IMRT 50 segment, dan CGR 0.2 cm. Evaluasi GI dilakukan dengan DD 2%, DTA 2 mm dan DD 5% DTA 3%, SAD 100 cm, dan kedalaman pengukuran pada phantom yaitu 5 cm dan 10 cm. Hasil penelitian menunjukkan GI pada material homogen lebih tinggi daripada material inhomogen. Selisih rata-rata hasil pengukuran GI terhadap penelitian sebelumnya untuk material homogen berkisar 1.98% (kedalaman 5 cm) dan 2.05% (kedalaman 10 cm) dan untuk material inhomogen sebesar 2.98% (kedalaman ekuivalen 5 cm) dan 4.59% (kedalaman ekuivalen 10 cm).

ABSTRACT
This study was the extended work which has been done by Wibowo (2015) about Gamma Index (GI) evaluation for homogeneous and inhomogeneous material with IMRT techniques. This study was done to evaluate the gamma index for registering between the planar of dose planning and the measurement from EBT film. Treatment plan was simulated for 5 patients using FBCT modality, Philips Pinnacle3 planning system, 6 MV photon energy, 50 segments IMRT technique, and calculation grid resolution (CGR) of 0.2 cm. GI evaluation was done with criteria of dose difference (DD) of 2%, dose to agreement (DTA) of 2 mm and DD of 5% DTA of 3 mm, SAD 100 cm, depth of 5 cm and 10 cm of the phantom. The result shows that GI for homogeneous material is greater than for inhomogeneous material with discrepancy to previous work is about 1,98% for homogeneous material (depth 5 cm) and 2.05% (depth 10 cm) while it was found of 2,98% for inhomogeneous material (equivalent depth 5 cm) and 4.59% (equivalent depth 10 cm)."
2016
S63793
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rosalina Tjandrawinata
"ABSTRAK
Gigi yang lebih putih sering dianggap lebih menarik dari lebih sehat. Agar lebih putih orang seringkali melakukan pemutihan gigi dengan bahan karbamid peroksida. Penelitian ini dilakukan untuk mengetahui pengaruh aplikasi karbamid peroksida 10 % dan stannous fluorida 0,4 % pada kristalit hidroksiapatit dalam email gigi dengan metode difraksi sinar-x. Sebagai pembanding digunakan bahan perendam hidrogen peroksida 10 % dan sebagai kontrol digunakan akuades. Aplikasi bahan perendam dilakukan selama 192 jam, dengan penggantian bahan setiap 8 jam dan perendaman akuades 8 jam di antara waktu penggantian bahan perendam. Perendaman dilakukan pada suhu 37°C dan kelembaban 100%, sesuai kondisi di dalam mulut. Pemeriksaan difraksi sinar-x dilakukan setelah perendarnan 96 dan 192 jam. Selain penghitungan ukuran kristalit, dilakukan juga penghitungan konstanta kisi dan regangan (strain). Dari penelitian ini diketahui bahwa penggunaan bahan perendam karbamid peroksida, stannous fluorida, kombinasi kedua bahan dan hidrogenperoksida tidak menyebabkan perubahan ukuran kristalit dan konstanta kisi kristal hidroksiapatit email gigi secara bermakna, tetapi mengubah regangan dalam butir kristal secara berarti.
Dari pemeriksaan difraksi sinar-x terlihat bahwa kristal hidroksiapatit pada bagian fasial email gigi memiliki preferred orientation pada bidang [002]. Untuk melihat keadaan permukaan sampel dilakukan pemeriksaan dengan mikroskop elektron (SEM) yang menunjukkan terjadinya perubahan pada perrnukaan email gigi akibat perendaman dalam karbamid peroksida, stannous fluorida dan hidrogen peroksida. Untuk mengetahui pengaruh keasaman perendam dilakukan pemeriksaan pH dengan pH-meter digital. Hasil pemeriksaan menunjukkan bahwa derajat keasaman (pH) bahan perendam tidak berpengaruh terhadap kerusakan pada email gigi.

ABSTRACT
Carbamide peroxide has recently been widely used as a vital tooth whitener. The successful result and the simple use of the material have captured the esthetic interest of the dental practitioners. On the other hand, in some cases this bleaching material can cause pulpal sensitivity that can be cured by using stannous fluoride gel.
The purpose of this experiment is to study the influence of 10 % carbamide peroxide and 0,4 % stannous fluoride application on the crystallite of hydroxyapatite in tooth enamel, by using x-ray diffraction method. Hydrogen peroxide solution and aquadest are used as control. The materials are applied for 8 hours in incubator with 37°C dan 100 % humidity, for total 192 hours.Then it can be concluded that carbamide peroxide and stannous fluoride do not influence neither the crystallite size of tooth enamel nor the lattice parameters, but they influence the strain in crystal.
The x-ray diffraction on the facial surface of enamel shows preferred orientation patern at [002]. The application of the carbamide peroxide and hydrogen peroxide materials cause damage on the tooth enamel surfaces that can be detected by scanning electron microscope. In this experiment, the acidity of the materials is detected by digital pH-meter.
"
Depok: Universitas Indonesia, 1997
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Wigati Kristina Tri
"Telah dilakukan investigasi akurasi kinerja sistem jejaring CT scan Siemens Somatom Sensation 4, TPS Philips Pinnacle3, dan Linac Siemens PRIMUS 2D Plus milik Rumah Sakit Pusat Pertamina, Jakarta. Untuk investigasi ml, telah dibuat fantom khusus untuk mengukur akurasi jarak, ukuran penampang, dan densitas massa obyek path citra tampilan CT dan TPS. Khusus untuk memperoleh hubungan antara bilangan CT (HU) dan densitas massa obyek digunakan material fantom air, udara, akrilik, nilon, teflon, gliserin, dan aluminium. Pengambilan data dilakukan dengan 2 metode scanning, metode I dengan kondisi 120 kVp, tebal irisan 10 mm dan kolimasi 1 mm, serta metode II dengan kondisi 120 kVp, tebal irisan 10 mm dan kolimasi 2.5 mm. Hasil pengukuran jarak menunjukkan deviasi dalàm rentang 0.00% - 0.19% untuk metode I yang diperoleh dan 50% data, dan rentang 0.20% - 0.39% untuk metode II yang diperoleh dan 40% data. Tampilan penampang obyek memiliki ukuran relatif lebih besar dibandingkan dengan penampang sebenarnya dengan rentang deviasi 0,38% sampai dengan 8.3 7%. Perbedaan tertinggi terjadi path material aluminium dengan densitas 2.7 g/cm3. Penentuan deviasi densitas massa diperoleh setelah dilakukan kalibrasi nilal bilangan CT menjadi data densitas massa path sistem TPS. Berdasarkan observasi dan 40% dan 77.8% data pada metode I dan II, diperoleh deviasi densitas massa kurang dan 1%. Dalam penelitian mi juga dilakukan investigasi terhadap akurasi sistem laser untuk penentuan variasi posisi. Sistem laser memiliki akurasi yang sangat tinggi yaitu mendekati 100% path ruang CT simulator dan 99% pada ruang linac.

Performance accuracy of a network system, which is consists of CT Scanner Siemens Somatom Sensation 4, Treatment Planning System Philips Pinnacle 3, and Linac Siemens PRIMUS 2D at Pertamina Central Hospital, Jakarta has been investigated A special phantom has been made for measurement in this work With this phantom, the accuracy of distance, diameter, and mass density of object were measured through the CT image and DRR as well. Data was collected by using 2 scanning method with operation condition 120 kVp, 10 mm slice thickness, 1 mm collimation for scanning method I, and 120 kVp, 10 mm slice thickness, 2.5 mm collimation for scanning method H. The measurement result indicated that the inaccuracy of reconstruction with scanning method! and II, for distance respectively in the range 0.00% - 0.19% and 0.20% - 0.39%, for diameter and mass density of both method respectively in the range 0,38% - 8.37% and less than 1016. Furthermore, the accuracy of laser system of CT and linac were also observea and the result of both laser systems were in a good accuracy."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2008
T23031
UI - Tesis Open  Universitas Indonesia Library
cover
Nurizati
"ABSTRAK
Telah dilakukan pengukuran dosis yang diterima janin pasien radioterapi dengan menggunakan simulasi perhitungan Monte Carlo DOSXYZnrc. Diandaikan pasien kanker payudara dan diberi radioterapi pada daerah dada dengan sinar-x 2 MeV, lapangan tangensial 6 x 16 cm2 dan supraclave 14 x 5.8 cm2 (kategori kecil), tangensial 9 x 15 cm2 dan supraclave 17.7 x 8.6 cm2 (kategori sedang), dan tangensial 8.5 x 19 cm2 dan supraclave 20.4 x 11.4 cm2 (kategori besar), serta lapangan tangensial 6 x 16 cm 2 , 9 x 15 cm2, dan 8.5 x 19 cm2 untuk pasien yang hanya menerima perlakuan tangensial. Jarak antara tepi lapangan radiasi dengan posisi titik pengukuran dibuat bervariasi dengan asumsi letak janin yang berubah sesuai umur kehamilan dan diamati pada tiap trimester kehamilan. Pada setiap jarak tertentu, perhitungan dosis dilakukan pada 3 kedalaman berbeda yaitu 2, 5, dan 10 cm. Hasil perhitungan menunjukkan bahwa dosis janin akan berkurang dengan bertambahnya kedalaman, berkurangnya luas lapangan, dan maksimum pada saat jarak antara tepi lapangan dengan posisi janin terdekat.

ABSTRACT
The fetal dose that received at radiotherapy patient was measured by using Monte Carlo DOSXYZnrc simulation calculations. Patient was regarded breast cancer patients and given radiotherapy to the chest area with 2 MeV x-ray beam, field tangential 6 x 16 cm2, and 5.8 x 14 cm2 supraclavicula (small categories), field tangential 9 x 15 cm2 and 17.7 x 8.6 cm2 supraclavicula (medium categories) and tangential 8.5 x 19 cm2 and 20.4 x 11.4 cm2 supraclavicula (large category), as well as field tangential 6 x 16 cm2, 9 x 15 cm2, and 8.5 x 19 cm2 for patients who received only tangential treatment. Distance between the radiation field edge to the position of measurement point varies with assumption that the changing according the location fetal gestation and observed at each trimester of pregnancy. At any given distance, the dose calculations performed at 3 different depths of 2, 5, and 10 cm. The calculations show that the fetal dose will decrease with increasing depth, decreasing of the area field, and at the time of maximum distance between the edge of the field with a fetal position nearby."
2010
T29106
UI - Tesis Open  Universitas Indonesia Library
cover
Gusti Ngurah Sutapa
"ABSTRAK
Induksi dosis radiasi rendah memungkinkan terjadinya perubahan pada mekanisme sistem sellular dan molekuler, yang dengan kondisi tertentu, dapat memproteksi sel terhadap efek yang ditimbulkan oleh dosis radiasi tinggi yang diterima berikutnya. Fenomena demikian disebut respon radioadaptasi. Telah dilakukan penelitian respons adaptasi pada 80 ekor mencit jantan berumur 37 - 46 hari, dengan berat dalam rentang 23.79 ? 26.66 gram. Sampel mencit dibagi menjadi 4 kelompok, satu kelompok untuk kontrol sedangkan kelompok lainnya diberi perlakuan penyinaran dengan radiasi gamma Co 60, yang selanjutnya disebut perlakuan tanpa adaptasi, adaptasi I, dan adaptasi II. Pada perlakuan tanpa adaptasi, mencit diberi dosis challenges 1.0, 1.5, 2.0, 2.5, dan 3.0 Gy, perlakuan adaptasi I sampel mencit diberi dosis adaptasi 0.1 Gy sebelum kelima dosis challenges, dan perlakuan adaptasi II dosis kelima dosis challenges diberikan 5 menit setelah menerima dosis adaptasi 0.1 Gy. Jumlah leukosit rata-rata mencit kelompok kontrol (9.51 &lusmn; 0.81) x 103/μl. Umumnya pemberian radiasi pada ketiga perlakuan mengakibatkan jumlah lekosit menunun dan linier dengan kenaikan dosis. Penurunan jumlah leukosit tertinggi terjadi pada perlakuan tanpa adaptasi, kemudian diikuti oleh perlakuan adaptasi I dan perlakuan adaptasi II, dengan representasi koefesien linieritas -0.18, -0.15, dan -0.11.
Ini menunjukkan bahwa respons adaptasi meningkat bila ada interval waktu antara pemberian dosis adaptasi dan dosis challenges. Selain respons pada leukosit, telah diteliti pula respons pada berbagai komponen leukosit, antara lain segmen neutrofil dan limfosit yang jumlahnya cenderung sedikit menurun seperti pada leukosit, serta eosinofil, neutrofil, neutrofil batang, dan monosit yang ternyata tidak memberikan perubahan respons yang signifikan pada ketiga perlakuan.

ABSTRAK
Low radiation dose induction might changes the mechanism of cellular and molecular system, with a certain condition; it can protect cells to reduce the effect from subsequent high dose. This phenomenon is called radioadaptive response. In this work radioadaptive response has been investigated to 80 male mice with the age from 37 to 46 days, and the weight from 23.79 to 26.66 grams. These samples were divided into 4 groups, one group was a control, and the other groups were treated with Co 60 gamma radiation which will be called as treatment without adaptive, adaptive I, and adaptive II. To the mice from the group of treatment without adaptive, challenge doses of 1.0, 1.5, 2.0, 2.5, and 3.0 Gy were delivered. The same challenge doses were given to the adaptive I and adaptive II treatment group after direct and 5 minutes receiving the adaptive dose of 0.1 Gy. The number of total leucocyt counts from the control group was (9.51 &lusmn; 0.81) x 103/μl. In general radiation doses decrease the leucocytes counts from the three treated groups and linearly related with the increasing dose. The effect of radioadaptive response of the adaptive II treatment group was relatively highter, which were illustrated by the linear coeffecient of the group without adaptive, adaptive I, and adaptive II with the value of -0.18, -0.15, and -0.11 repectively.
These results indicated that the adaptive response increased when there was interval delivering time between adaptive and challenge dose. It was also found that components of leucocytes such as neutrophyl leucocytes and lymphocytes segments gave lower response with the trend likely the same as leucocytes. Furthermore there were no significant changes of response from the three types of treatment to other components such as eosinophyls, neutrophyl stems, and monocytes."
2010
T29011
UI - Tesis Open  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8   >>