Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 9 dokumen yang sesuai dengan query
cover
Muhammad Haryo Dwiriandri
"Tanah lempung merupakan salah satu jenis tanah yang memiliki banyak manfaat. Tanah lempung dapat dimanfaatkan pada bidang pertanian sebagai media tanaman yang membutuhkan kuantitas air yang cukup banyak karena tanah lempung memiliki nilai porositas yang tinggi dan nilai permeabilitas yang rendah. Cara mengidentifikasi tanah lempung dapat memanfaatkan metode resistivitas. Salah satu jenis tanah yang memiliki nilai resistivitas tinggi adalah tanah lempung. Tujuan dilakukan penelitian ini adalah untuk mengidentifikasi pengaruh tanah lempung terhadap nilai resistivitas tanah. Penelitian ini dilakukan untuk mengetahui hubungan antara tanah lempung terhadap perubahan nilai resistivitas tanah di lahan perkebunan Cikreteg, Jawa Barat. Dalam melakukan penelitian ini pengambilan sampel dilakukan di tiga lahan berbeda dengan variasi kedalaman hingga 100 cm untuk menganalisis hubungan tanah lempung terhadap nilai resistivitas. Nilai resistivitas didapatkan setelah mengukur nilai resistivitas tanah sampel di laboratorium menggunakan alat pengukuran resistivitas konfigurasi empat elektroda. Keberadaan mineral lempung dapat dibantu oleh analisis SEM (Scanning Electron Microscopy) dan XRD (X Ray Diffraction) dimana terlihat pada hasil foto SEM bahwa terdapat tanah dengan ukuran butir bernilai dibawah 2 μm, dan hasil analisis XRD menunjukan pada tanah sampel yang diambil di daerah Cikreteg, Jawa Barat mengandung mineral lempung dickite dan kaolinite. Kesimpulan yang diperoleh dalam penelitian kali ini menunjukan bahwa distribusi partikel tanah lempung memiliki pengaruh terhadap nilai resistivitas atau dengan kata lain keberadaan tanah lempung mempengaruhi nilai resistivitas tanah.

Clay soil is a type of soil that has many benefits. Clay soil can be used in agriculture as a growing medium which requires a large quantity of water because clay has a high porosity value and a low permeability value. How to identify clay soil can use the resistivity method. One type of soil that has a high resistivity value is clay soil. The purpose of this study was to identify the effect of clay on soil resistivity values. This research was conducted to determine the relationship between clay soil and changes in soil resistivity values in plantation areas in Cikreteg, West Java. In conducting this study, sampling was carried out in three different fields with variations in depth of up to 100 cm to analyze the relationship of clay soil to resistivity values. The resistivity value was obtained after measuring the resistivity value of the sampled soil in the laboratory using a four-electrode configuration resistivity measurement tool. The presence of clay minerals can be assisted by SEM (Scanning Electron Microscopy) and XRD (X Ray Diffraction) analysis where it can be seen from the SEM photo results that there is soil with a grain size of less than 2 μm, and the results of the XRD analysis show that the soil samples taken in the Cikreteg area , West Java contains dickite and kaolinite clay minerals. The conclusions obtained in this study show that the distribution of clay particles has an influence on the resistivity value or in other words the presence of clay affects the resistivity value of the soil."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Firda Mahfuziahaq
"Sifat kelistrikan batuan banyak digunakan dalam mengkarakterisasi batuan reservoir karena kemampuannya dalam mengidentifikasi jenis fluida dan tingkat saturasinya. Penelitian ini bertujuan untuk memberikan pemahaman yang lebih baik tentang sifat listrik batuan Formasi Ngrayong menggunakan pengukuran laboratorium dan perhitungan digital rock physics. Penelitian ini menggunakan 2 sampel dengan ukuran butir 0.85 - 2 mm dan 0.85 – 0.425 mm untuk pengukuran resistivitas listrik yang diinjeksi konsentrasi fluida brine. Menggunakan variasi porositas, nilai resistivitas listrik pengukuran laboratorium injeksi fluida adalah 15,167 Ωm – 49,835 Ωm dan 30,78 Ωm – 991,469 Ωm serta didapat koefisien korelasi 0,5 dan 0,7 menandakan korelasi yang kuat pada dua metode pengukuran. Hasil menunjukkan nilai resistiviitas listrik batuan dapat dipengaruhi oleh porositas. Nilai resistivitas listrik batuan akan semakin turun seiring dengan meningkatnya porositas yang diinjeksi oleh fluida brine. Hubungan antara resistivitas listrik batuan dengan porositas dapat memenuhi Hukum Archie dengan nilai m sebesar 1,81 untuk sampel A dan m sebesar 1,70 – 1,88 untuk sampel B. Penelitian ini mengevaluasi sejauh mana digital rock physics dapat mereproduksi nilai resistivitas listrik batuan yang diperoleh dari pengukuran laboratorium.

The electrical properties of rocks are widely used in characterizing reservoir rocks due to their ability to identify fluid types and saturation levels. This research aims to provide a better understanding of the electrical properties of Ngrayong Formation rocks using laboratory measurements and digital rock physics calculations. Two samples with grain sizes of 0.85 - 2 mm and 0.85 - 0.425 mm were used for measuring the electrical resistivity with the injection of brine fluid. By varying the porosity, the laboratory measurement results for fluid injection showed resistivity values ranging from 15,167 Ωm to 49,835 Ωm and 30.78 Ωm to 991,469 Ωm, with correlation coefficients of 0.5 and 0.7 indicating a strong correlation between the two measurement methods. The results indicate that the electrical resistivity of the rock can be influenced by porosity. As the porosity injected by brine fluid increases, the electrical resistivity of the rock decreases. The relationship between the electrical resistivity of the rock and porosity can satisfy the Archie's Law, with an exponent (m) value of 1.81 for sample A and 1.70 - 1.88 for sample B. This research evaluates the extent to which digital rock physics can reproduce the electrical resistivity values obtained from laboratory measurements."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Anindia Kusuma Winahyu
"Analisis porositas dan permeabilitas penting dilakukan karena dapat membantu dalam penentuan parameter produksi dan mampu menjelaskan perilaku fluida pada pori batuan. Keduanya bisa didapat dari analisis petrofisika (well analysis, well testing, core analysis) dan rock phyiscs (quantitative seismic). Dari beberapa metode yang telah dilakukan untuk analisis porositas dan permeabilitas, masih belum mencukupi kebutuhan indentifikasi akan kompleksitas mikrostruktur pada batuan dan perilaku fluida pada pori batuan. Digital rock physics muncul sebagai metode yang dapat melengkapi kekurangan pada metode-metode tersebut. Penelitian ini bertujuan menganalisis kompleksitas mikro-struktur batuan terhadap porositas dan permeabilitas melalui citra batuan dengan menerapkan metode Digital Rock Physics. Hal ini dilakukan dengan mengkarakterisasi porositas dan permeabilitas pada batupasir dan karbonat dari sampel citra batuan lalu melakukan simulasi injeksi fluida menggunakan metode Parallel Lattice Boltzmann. Data berupa sampel citra batupasir dan karbonat yang merupakan core sample dari beberapa reservoir dengan kualitas baik di sekitar Eropa-Amerika Serikat, dengan ukuran sampel 200x200x200 pixels, tiap pixel sebanding dengan 1000 mm. Hasil analisis menunjukkan nilai porositas batupasir tergolong sangat baik dengan rentang 20-29% dan permeabilitas juga tergolong sangat baik dengan nilai >250mD. Korelasi keduanya menunjukkan adanya korelasi yang baik antara porositas terhadap permeabilitas dengan nilai R2 terbesar 0.81. Hasil ini sangat bermanfaat untuk pekerjaan identifikasi reservoir sebagai data pendukung untuk mengurangi uncertainty yang masih belum terjawab dalam beberapa metode analisis yang sebelumnya dilakukan (well logging, core analysis, quantitative seismic interpretation).

Porosity and Permeability analysis are important because it could help to determine production parameters and able to explain the fluid content in rock pores. Both can be obtained from petrophysics analysis (well analysis, core analysis) and rock physics analysis (quantitative seismic interpretation). Of the several methods that have been carried out, still insufficient identification needs for the micro-strcutures complexity and fluid content in rock pores. Digital rock physics could complement the lack of petrophysics and quantitative seismic interpretation analysis. This study aims to analyze the micro-structure complexity against porosity and permeability by rock image using digital rock physics method. This research is done by characterizing the porosity and permeability of sandstones and carbonates from rock image samples, then simulating fluid injection using Parallel Lattuce Boltzmann method. The data are rock images of sandstones and carbonates core samples from several well-produced reservoirs around Europe-United States, with a sample size of 200 x 200 x 200 pixels, which each pixel presents 1000 mm. The results show the sandstones porosity value classified as very good porosity with range 20%-29%. The permeability also classified as very good permeability with a value of >250mD. The correlation of porosity and permeability indicates good correlation with the largest R2 value of 0.81. This study is very useful for reservoir identification as supporting data to reduce uncertainty that is still unanswered in several previous anlysis methods."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Riansyah
"Pupuk berperan dalam penyediaan unsur hara bagi keperluan tanaman yang dibedakan menjadi dua jenis pupuk yaitu, pupuk organik dan anorganik. Pemberian pupuk (organik dan anorganik) secara berlebih membuat kondisi lahan menjadi kekurangan unsur hara yang berpengaruh dalam kesuburan tanah, perubahan struktur tanah dan pencemaran lingkungan. Penelitian ini memanfaatkan metode resistivitas untuk mengamati perubahan nilai resistivitas akibat pemberian pupuk organik dan anorganik pada lahan pertanian di Kecamatan Caringin, Kabupaten Bogor. Pemilihan metode resistivitas geolistrik karena dapat memetakan karakteristik tanah dengan cepat dan murah. Data yang digunakan dalam penelitian ini terdiri dari data resistivitas lapangan dan sampel tanah. Pengukuran resistivitas lapangan dilakukan sebanyak 5 kali pengukuran (1 kali sebelum diberi pupuk dan 4 kali setelah diberi pupuk) pada setiap lintasan (lintasan Organik dan lintasan Anorganik). Konfigurasi yang digunakan merupakan konfigurasi dipole-dipole dengan panjang lintasan 6 meter dan elektroda sebanyak 16 batang. Sedangkan pengukuran sampel tanah dilakukan di laboratorium sedimentologi, FMIPA UI untuk mendapatkan klasifikasi tekstur tanah dan grafik resistivitas fungsi kadar air. Hasil yang didapat menunjukan bahwa perubahan nilai resistivitas dalam rentang 27 jam setelah diberi pupuk (organik dan anorganik) cenderung mengalami penurunan yang disebabkan oleh kadar air dan reaksi larutan kimia pupuk dan penurunan resistivitas pemberian pupuk organik lebih tinggi dibandingkan larutan anorganik.

Fertilizers play a role in providing nutrients for plant needs and are categorized into two types of fertilizers, namely, organic and inorganic fertilizers. Excessive application of fertilizers (organic and inorganic) causes a lack of nutrients that affect soil fertility, changes in soil structure, and environmental pollution. This study uses the resistivity method to observe changes in resistivity values due to applying organic and inorganic fertilizers on agricultural land in Caringin District, Bogor Regency. The geoelectric resistivity method was chosen because it can map soil characteristics quickly and cheaply. The data used in this study consisted of field resistivity data and soil samples. Field resistivity measurements were carried out five times (1 time before being fertilized and four times after being fertilized) on each line (Organic line and Inorganic line). The configuration used is a dipole-dipole configuration with a line length of 6 meters and a total of 16 electrodes. Meanwhile, soil sample measurements were carried out at the sedimentology laboratory, FMIPA UI to obtain a soil texture classification and a resistivity graph of the water content function. The results showed that the change in resistivity values within 27 hours after being given fertilizer (organic and inorganic) tended to decrease due to the fertilizer solution's water content and chemical reaction. The decrease in resistivity of organic fertilizer application was higher than inorganic solutions."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ratna Maulidia
"Karakterisasi tanah dan air yang meliputi pengambilan sampel tanah dan analisis laboratorium penting dilakukan dalam upaya pencegahan pencemaran lingkungan yang disebabkan oleh produksi pertanian secara intensif. Pengukuran resistivitas listrik tanah skala laboratorium dengan metode empat elektrode telah dilakukan untuk menganalisis pengaruh saturasi fluida terhadap resistivitas listrik tanah. Delapan sampel tanah disiapkan untuk pengukuran resistivitas listrik dengan menginjeksikan larutan pupuk kompos dengan konsentrasi larutan 28,6%, urea dengan konsentrasi larutan 0,013%; 0,022%; 0,038%, NPK dengan konsentrasi larutan 0,013%; 0,022%; 0,038% , serta akuades pada sampel tanah dengan tingkat saturasi 4%-100% dari volume porinya. Pengukuran estimasi sifat fisika-kimia fluida seperti resistivitas listrik larutan, TDS, salt, dan pH dari larutan pupuk juga dilakukan menggunakan alat water quality meter untuk dianalisis pengaruhnya terhadap resistivitas listrik tanah. Hasil menunjukkan, pada seluruh variasi konsentrasi larutan memiliki pola yang sama, penurunan resistivitas listrik terjadi seiring dengan bertambahnya saturasi fluida hingga pada saturasi fluida 80-90%. Setelah melewati saturasi tersebut, nilai resistivitas tanah cenderung konstan. Hubungan resistivitas listrik tanah dan saturasi fluida juga dijelaskan mengikuti Hukum Archie, diperoleh a = 0,7164-0,9149 dan eksponen saturasi (n) = 2,312-3,496 dengan koefisiden determinasi (R2) = 0,9187-0,9565. Sifat fisika-kimia dari larutan pupuk juga berkontribusi terhadap perbedaan nilai resistivitas listrik tanah. Dari penelitian ini diharapkan dapat menjadi referensi untuk memprediksi saturasi air pada suatu lahan serta menentukan zona batas toleransi tanaman terhadap salinitas.

Soil and water characterization is important in preventing environmental pollution caused by intensive agricultural production. Laboratory-scale soil electrical resistivity measurements using the four-electrode method have been carried out to analyze the effect of fluid saturation on the soil electrical resistivity. Eight soil samples were prepared for the measurement of electrical resistivity by injecting a solution of compost (solution concentration = 28.6%), urea (solution concentrations = 0.013%; 0.022%; 0.038, NPK (solution concentrations = 0.013%; 0.022%; 0.038%) and distilled water in soil samples with a saturation level of 4%-100%. Measurements of the estimation of the physico-chemical properties of the fluid such as the electrical resistivity, TDS, salt, and pH of the fertilizer solution using a water quality meter were also carried out to analyze the effect on the electrical resistivity of the soil. The results show that the electrical resistivity of the soil decreases along with the increase in fluid saturation until the fluid saturation is 80-90% at all solution concentrations. After passing through the saturation, the electrical resistivity of the soil tends to be constant. The relationship between the soil electrical resistivity and the saturation of the fluid is also explained according to Archie's Law, obtained a = 0,7164-0,9149 and the saturation exponent (n) = 2,312- 3,496 with coefficient of determination (R2) = 0,9187-0,9565. The physico-chemical properties of the fertilizer solution also contribute to the difference in the electrical resistivity of the soil. This research is expected to be a reference for predicting water saturation in agricultural land and determining the tolerance zone of plants to salinity."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bintang Adji Widjaja
"Perhitungan cadangan hidrokarbon merupakan suatu kajian untuk mengetahui jumlah minyak dan gas dari suatu lapangan yang diindikasikan memiliki cadangan hidrokarbon. Untuk mendapatkan perkiraan jumlah cadangan dilakukan beberapa proses yang terutama adalah pemodelan reservoar yang dapat dibagi menjadi dua tahap utama yaitu pemodelan struktur dan pemodelan properti. Analisis petrofisika bertujuan untuk mendapatkan parameter petrofisika yang berguna untuk karakterisasi batuan reservoar. Pada penelitian kali ini didapatkan bahwa batuan reservoar memiliki nilai porositas rata – rata sebesar 0.2, nilai kandungan lempung rata – rata sebesar 0.6 dan nilai saturasi air rata – rata sebesar 0.5. Analisis multiatribut seismik digunakan untuk melakukan persebaran parameter petrofisika pada volum seismik. Atribut yang digunakan adalah inversi seismik sebagai atribut eksternal, Instantaneous Frequency, Amplitude Envelope, Cosine Instantaneous Phase dan Instantaneous Phase. Berdasarkan hasil analisis petrofisika dan pemodelan reservoar didapatkan potensi gas pada area sumur SMR-01 dengan arah persebaran reservoar pada azimuth 45˚ dengan nilai major direction 3700 dan minor direction 3200. Lapangan “MSS” didapatkan perkiraan cadangan jumlah GIIP sebesar 776553 103 sm3.

Calculation of hydrocarbon reserves is a study to determine the amount of oil and gas from a field which is indicated to have hydrocarbon reserves. To get an estimate of the amount of reserves, several processes are carried out, mainly reservoir modelling can be divided into two main stages, structural modelling and property modelling. Petrophysical analysis aims to obtain petrophysical parameters that are useful for characterizing reservoir rocks. In this study, it was found that the reservoir rock has an average porosity value is 0.2, an average clay content value is 0.6 and an average water saturation value is 0.5. Seismic multi-attribute analysis was used to perform the distribution of petrophysical parameters on seismic volume. The attributes used are seismic inversion as an external attribute, Instantaneous Frequency, Amplitude Envelope, Cosine Instantaneous Phase and Instantaneous Phase. Based on the results of petrophysical analysis and reservoir modelling, The gas reserves found in the SMR-01 well area with the reservoir distribution direction is 45˚ azimuth with a major direction value of 3700 and a minor direction of 3200. "MSS" field estimated reserves of GIIP are 776553 103 sm3."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Kayla Inas Maharani
"Hubungan resistivitas listrik dan parameter geoteknik sangat penting ditinjau dalam lahan perkebunan, karena kemampuannya dalam menganalisis komponen penyusunan tanah di lahan tersebut. Dalam penelitian ini dilakukan studi pengaruh parameter geoteknik, yaitu kadar air, bulk unit weight, indeks plastisitas, kadar lempung dan lanau, dan kuat geser tanah terhadap perubahan nilai resistivitas tanah di lahan perkebunan di Kabupaten Bogor. Selain itu, tujuan dilakukannya penelitian ini adalah untuk dapat memberikan gambaran dalam menginterpretasi kondisi tanah di lahan perkebunan di Desa Cikereteg, Kecamatan Caringin, Kabupaten Bogor. Tiga lahan dengan variasi kedalaman 0-100 cm dianalisis untuk memahami hubungan antara parameter geoteknik tanah dengan nilai resistivitas listriknya berdasarkan skala laboratorium. Hasil yang didapat menunjukkan bahwa nilai resistivitas dapat dipengaruhi oleh kadar air, bulk unit weight, dan kohesi tanah, ketiganya memiliki hubungan secara polinomial orde tiga. Kadar air memiliki hubungan berbanding terbalik dengan nilai resistivitas, sedangkan bulk unit weight dan kohesi tanah memiliki hubungan berbanding lurus. Selain itu, indeks plastisitas dan kadar ukuran butir lempung dan lanau kurang berkorelasi dengan nilai resistivitas tanah. Sehingga, dapat disimpulkan bahwa nilai resistivitas tanah di lahan perkebunan dipengaruhi oleh adanya parameter geoteknik, tetapi masih perlu evaluasi lebih lanjut untuk kedepannya dapat digunakan untuk menganalisis komponen penyusun tanah secara lebih akurat.

Geotechnical parameters and resistivity can be used to analyze soil components on plantation land. The study analyzes the influence of soil geotechnical parameters, namely water content, bulk unit weight, plasticity index, clay, silt content, and soil shear strength in controlling soil resistivity on plantation land in Bogor Regency. In addition, this research provides an overview in interpreting soil conditions on plantation land in Cikereteg Village, Caringin District, Bogor Regency. In conducting this research, there are three fields with a depth variation of 0-100 meters were analyzed to understand the relationship between resistivity and soil geotechnical parameters based on laboratory research. The results indicate that the resistivity is controlled by water content, bulk unit weight, and soil cohesion in form of the third-order polynomial function. The resistivity decreases rapidly with increasing water content, while increases rapidly with increasing bulk unit weight and soil cohesion. In addition, the plasticity index and grain size content of clay and silt are less correlated with soil resistivity. In conclusion, the soil electrical resistivity in plantation land is affected by the soil geotechnical parameters, but it still needs to be evaluated further so it can understand the soil components more accurately in the future.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aditya Awalludien W.
"Sifat kelistrikan batuan banyak digunakan dalam mengkarakterisasi batuan reservoir karena kemampuannya dalam mengidentifikasi jenis fluida dan tingkat saturasinya. Penelitian ini bertujuan untuk mengidentifikasi dan menganalisis resistivitas listrik pada sampel batuan yang didapatkan dari pengukuran laboratorium dan perhitungan Digital Rock Physics, serta korelasinya terhadap saturasi air. Penelitian ini menggunakan tiga sampel untuk pengukuran resistivitas listrik yang diinjeksikan larutan brine dengan konsentrasi NaCl sebesar 6% pada tingkat saturasi 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, dan 100%. Sampel tersebut didapatkan dari Formasi Ngrayong, Jawa Timur. Didapatkan nilai porositas berkisar 39,72% - 40,11%. Sedangkan untuk nilai resistivitas berkisar 57,56 Ωm - 12240 Ωm untuk sampel A, 55,02 Ωm - 12206 Ωm untuk sampel B, dan 54,9 Ωm - 9938 Ωm untuk sampel C. Berdasarkan nilai tersebut bahwa nilai resistivitas listrik pada sampel batuan yang didapatkan dari pengukuran laboratorium dan perhitungan Digital Rock Physics saling berkorelasi sangat kuat, ditunjukkan dengan nilai koefisien korelasi diatas 0,9. Hasil menunjukkan bahwa nilai resistivitas listrik batuan dapat dipengaruhi oleh saturasi air. Nilai resistivitas listrik batuan akan semakin turun seiring dengan meningkatnya saturasi air. Nilai resistivitas listrik batuan sudah tidak dipengaruhi oleh saturasi air ketika sudah mencapai titik kritis yang mana nilai resistivitas listrik akan cenderung konstan. Selain itu, hubungan antara resistivitas listrik batuan dengan saturasi air dapat memenuhi Hukum Archie, yang mana nilai a berkisar 0,847 - 1,4404 serta nilai n berkisar 1,571 - 2,356. Melalui penelitian ini, karakterisasi sifat listrik batuan dapat juga dilakukan melalui Digital Rock Physics yang memberikan perkiraan waktu lebih efisien serta hasil identifikasi yang lebih rinci.

The electrical properties of rocks are widely used in characterizing reservoir rocks because of their ability to identify fluid types and saturation levels. This study aims to identify and analyze the electrical resistivity of rock samples obtained from laboratory measurements and Digital Rock Physics calculations, as well as their correlation to water saturation. This study used three samples for measuring electrical resistivity which were injected with brine solution with 6% NaCl concentration at saturation levels of 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100%. The sample was obtained from the Ngrayong Formation, East Java. The porosity values obtained ranged from 39.72% - 40.11%. Meanwhile, the resistivity values ranged from 57.56 Ωm - 12240 Ωm for sample A, 55.02 Ωm - 12206 Ωm for sample B, and 54.9 Ωm - 9938 Ωm for sample C. Based on this value, the electrical resistivity values in rock samples obtained from laboratory measurements and Digital Rock Physics calculations are very strongly correlated with each other, indicated by the correlation coefficient value above 0.9. The results show that the electrical resistivity of rocks can be affected by water saturation. The value of the electrical resistivity of the rock will decrease as the water saturation increases. The value of the electrical resistivity of rocks is no longer affected by water saturation when it reaches a critical point where the electrical resistivity value will tend to be constant. In addition, the relationship between the electrical resistivity of rock and water saturation can fulfill Archie's Law, where the a value ranges from 0.847 - 1.4404 and the n value ranges from 1.571 - 2.356. Through this research, the characterization of the electrical properties of rocks can be solved through Digital Rock Physics which provides more efficient time estimates and more detailed identification results."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Julianto
"Paris Agreement merupakan perjanjian mengenai mitigasi emisi gas CO2. Tujuan perjanjian ini dibentuk untuk menahan laju peningkatan temperatur global. Hal ini juga didukung mengenai volume emisi CO2 akibat pembakaran bahan bakar fosil yang mencapai 56% dari total semua emisi global. Carbon Capture and Storage (CCS) adalah salah satu solusi di bidang teknologi mitigasi yang membahas pemanasan global. Penelitian ini bertujuan untuk mengidentifikasi dan menganalisis konduktivitas listrik pada sampel batuan tersaturasi CO2 yang didapatkan dari perhitungan Digital Rock Physics. Metode Digital Rock Physics adalah suatu metode berbasis digital yang memanfaatkan citra batuan digital untuk mengidentifikasi sifat fisis batuan dan visualisasi struktur mikro batuan secara lebih efektif dan efisien. Dengan memanfaat metode digital rock physics menggunakan sampel batuan pasir dan karbonat, dapat menunjukkan antara korelasi konduktivitas listrik terhadap batuan tersaturasi CO2 dengan konsentrasi 2 mg / L, 6.5 mg/L, dan 10 mg/L tiap saturasi CO2 mulai dari 0% hingga 100%. Hasil analisis menunjukkan nilai konduktivitas listrik sangat baik pada batuan pasir dengan rentang 1.38 μS/cm - 2.80 μS/cm dan batuan karbonat dengan rentang 18.38 μS/cm - 20.47 μS/cm. Hasil penelitian ini menunjukkan nilai konduktivitas listrik berbanding lurus dengan saturasi CO2. Hasil penelitian juga menunjukkan nilai porositas sangat baik pada batuan pasir dengan rentang 19.51% - 26.92% dan batuan karbonat 12.88% - 14.41%. Porositas juga mempengaruhi nilai konduktivitas listrik terhadap batuan tersaturasi CO2. Semakin besar nilai porositas, maka konduktivitas listrik akan semakin rendah. Konsentrasi CO2 juga mempengaruhi konduktivitas listrik, dimana semakin tinggi konsentrasi CO2 maka semakin besar nilai kondukstivitas listrik yang didapat. Hubungan antara konduktivitas listrik batuan dengan konsentrasi CO2 sangat kuat dengan koefisien korelasi diatas 0,9 untuk semua sampel. Berdasarkan hasil ini dapat digunakan sebagai salah satu parameter aplikasi Carbon Capture Storage (CCS) untuk mengetahui saturasi CO2 yang berada di dalam reservoir berdasarkan konduktivitas listrik batuan dengan catatan sebelumnya reservoir yang digunakan tidak ada fluida yang terisi dan tidak ada kompaksi tanah.

The Paris Agreement is an agreement on the mitigation of CO2 gas emissions. The purpose of this agreement was formed to restrain the rate of increase in global temperature. This is also supported by the volume of CO2 emissions due to the burning of fossil fuels, which account for 56% of all global emissions. Carbon Capture and Storage (CCS) is one of the solutions in the field of mitigation technology that addresses global warming. This study aims to identify and analyze the electrical conductivity of CO2 saturated rock samples obtained from Digital Rock Physics calculations. Digital Rock Physics method is a digital based method that utilizes digital rock images to identify rock physical properties and visualize rock microstructure more effectively and efficiently. By utilizing the digital rock physics method using sand and carbonate rock samples, it can show the correlation of electrical conductivity to CO2 saturated rocks with concentrations of 2 mg/L, 6.5 mg/L, and 10 mg/L per CO2 saturation ranging from 0% to 100%. The results of the analysis show that the electrical conductivity is very good in sandstone with a range of 1.38 μS/cm - 2.80 μS/cm and carbonate rocks with a range of 18.38 μS/cm - 20.47 μS/cm. The results of this study indicate the value of electrical conductivity is directly proportional to CO2 saturation. The results also showed very good porosity values in sandstone with a range of 19.51% - 26.92% and carbonate rock 12.88% - 14.41%. Porosity also affects the value of the electrical conductivity of CO2 saturated rocks. The greater the porosity value, the lower the electrical conductivity. The concentration of CO2 also affects the electrical conductivity, where the higher the concentration of CO2, the greater the value of the electrical conductivity obtained. The relationship between the electrical conductivity of rocks with CO2 concentration is very strong with a correlation coefficient above 0.9 for all samples. Based on these results, it can be used as one of the parameters for the application of Carbon Capture Storage (CCS) to determine the CO2 saturation in the reservoir based on the electrical conductivity of the rock with the previous record that the reservoir used was not filled with fluid and no soil compaction."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library