Hasil Pencarian  ::  Simpan CSV :: Kembali

"ABSTRAKResin komposit alkasit mampu melepaskan ion hidroksida sehingga dapat mempertahankan pH netral saliva. Ion yang dilepaskan lebih banyak pada suasana asam. Resin komposit alkasit dapat dipolimerisasi secara kimia dan/atau menggunakan sinar. Penelitian ini dilakukan untuk mengetahui kemampuan resin komposit alkasit polimerisasi kimia dan sinar dalam menetralkan saliva buatan. Jumlah spesimen 96 buah dibagi menjadi 16 kelompok perlakuan yang terdiri dari 2 kelompok saliva buatan (pH 4,5 dan 5,5), 2 kelompok metode polimerisasi (kimia dan sinar), dan 4 kelompok waktu perendaman (1, 3, 5, dan 7 hari). Spesimen berbentuk lempeng dengan diameter 15 mm dan tebal 1 mm yang direndam dalam 5 ml saliva buatan dan disimpan dalam inkubator bersuhu 37˚C. Hasil penelitian menunjukkan adanya peningkatan pH saliva buatan pada seluruh kelompok perlakuan seiring dengan waktu perendaman. Berdasarkan uji statistik Independent T test dan Mann Whitney U, secara umum tidak terdapat perbedaan bermakna dalam meningkatkan pH saliva buatan antara kelompok metode polimerisasi kimia dan sinar. Sedangkan, terdapat perbedaan bermakna kenaikan pH saliva buatan pada kelompok yang direndam pada saliva buatan pH 4,5 dan 5,5. Dapat disimpulkan bahwa kemampuan resin komposit alkasit polimerisasi kimia dan sinar sama baik dalam meningkatkan pH saliva buatan hingga hari ke 7, terutama dalam suasana yang lebih asam.

---

ABSTRACT

Alkasite composite resin is able to release hydroxide ions so it can maintain a neutral pH of saliva. More ions released in an acid condition. This composite resin can be polymerized chemically or using LED light. This study aimed to determine the ability of self-cured and light-cured alkasite composite resin to neutralize artificial saliva pH. Ninety-six specimens were immersed in 5 ml of artificial saliva, 15 mm in diameter and 1 mm thick were divided into 16 groups consist of 2 groups of artificial saliva (pH 4,5 and 5,5), 2 groups of polymerization method (self-cured and light-cured), and 4 groups of immersion time (1, 3, 5, and 7 days). The result showed that there was an increase in the pH of the artificial saliva in all treatment groups over the time of immersion. The statistical test using Independent T test and Mann Whitney U showed that in general there were no significant differences between the polymerization method. Meanwhile, there were significant differences between the groups that immersed in each artificial saliva pH. It was concluded that self cured and light cured composite resin alkasite have the same ability to increase the pH of artificial saliva until the 7th day, especially in an acid condition."

"Background: Recently, honey has been widely used as a sweetener. Along with the people's awareness to control the intake of calorie, the consumption of lowcalorie sweetener is increasing as well. How much these sweeteners contribute to caries process, however, are still unknown.

Objective: To compare the changes of viscosity, pH, and buffering capacity of saliva after consuming water containing honey and low calorie sweetener.

Method: Each research subject aged 20-22 years old was asked to consume 150 ml water that contained 17 grams of honey or 2,5 grams of low-calorie sweetener in different day, and waited for 10 minutes before conducting the viscosity, pH, and buffering capacity of saliva?s test.

Results: The data was analyzed by Wilcoxon test with 0,05 level of significance. The results obtained were the significant decreases in values of viscosity and buffering capacity of saliva before and after consuming water containing honey and water containing low-calorie sweetener, significant decrease in pH value before and after consuming water containing honey, no significant decrease in pH value before and after consuming water containing low-calorie sweetener. In addition, there were no significant differences in values of viscosity, pH, and buffering capacity between the groups consuming water containing honey and low-calorie sweetener.

Conclusion: There were significant differences in viscosity and buffering capacity of saliva before and after onsuming water containing honey and water containing low-calorie sweetener. Meanwhile, there was significant difference for the pH value before and after consuming water containing honey, while there was no significant difference for the pH value before and after consuming water containing low-calorie sweetener. However, there were no significant differences in viscosity, pH, and buffering capacity of saliva after consuming water containing honey and water containing low-calorie sweetener."

"Latar Belakang: Bahan pemanis yang biasa digunakan oleh masyarakat Indonesia adalah gula sukrosa. Namun belakangan ini madu juga mulai dikenal dan dijadikan sebagai bahan pemanis. Kandungan karbohidrat yang tinggi di dalam kedua bahan pemanis ini dianggap dapat mempengaruhi proses karies gigi. Dengan mengidentifikasi kualitas saliva, dapat diketahui pengaruh kedua bahan pemanis ini terhadap karies gigi.Tujuan: Membandingkan perubahan nilai viskositas, pH, dan kapasitas dapar saliva setelah konsumsi air madu dan air gula sukrosa.Metode: Tiga puluh orang subyek yang berusia 20-22 tahun mengkonsumsi air madu dan air gula sukrosa pada hari yang berbeda, masingmasing sebanyak 150 ml. Subyek menunggu selama 10 menit sebelum dilakukan uji viskositas, pH, dan kapasitas dapar saliva.Hasil Penelitian: Data dianalisis menggunakan uji Wilcoxon dengan tingkat kemaknaan p = 0,05. Setelah mengkonsumsi air madu dan air gula sukrosa, terjadi penurunan nilai viskositas, pH, dan kapasitas dapar saliva. Tetapi tidak terdapat perbedaan yang bermakna pada perbandingan nilai uji viskositas, pH, dan kapasitas dapar saliva antara setelah mengkonsumsi air madu dan setelah mengkonsumsi air gula sukrosa.Kesimpulan: Pada penelitian ini didapatkan adanya penurunan yang bermakna pada nilai viskositas, pH, dan kapasitas dapar saliva setelah mengkonsumsi air madu dan air gula sukrosa. Namun, pada perbandingan nilai viskositas, pH, dan kapasitas dapar saliva setelah mengkonsumsi air madu dan setelah mengkonsumsi air gula sukrosa, tidak terdapat perbedaan bermakna di antara keduanya.

---

Background: Usually, the Indonesians use sugar as their main sweetener. But nowadays, honey also begins to be recognized and used as a sweetener too. Because of their high carbohydrate content, people assume that both of these sweeteners can influence the tooth caries process. By identifying the quality of saliva, we can get the information about the effects of these sweeteners in tooth caries process.Objective: To compare the changes of viscosity, pH, and buffering capacity of saliva after consuming water containing honey and water containing sugar.Method: Thirty subjects aged 20-22 years old consumed 150 ml of water containing honey and water containing sugar in different day. Subjects waited until 10 minutes before the researcher run the test of viscosity, pH, and buffering capacity of saliva.Results: The data was analyzed using Wilcoxon test with 0,05 as the level of significance. In this research, the result showed that the value of viscosity, pH, and buffering capacity of saliva decreased after consuming water containing honey and water containing sugar. But, there were no significant differences in viscosity, pH, and buffering capacity of saliva between consumption of water containing honey and water containing sugar.Conclusion: The value of viscosity, pH, and buffering capacity of saliva decreased significantly after consuming water containing honey and water containing sugar. However, the comparison between the values of viscosity, pH, and buffering capacity after consuming water containing honey and water containing sugar were not significant."

"Penelitian ini bertujuan untuk mengetahui pengaruh lama perendaman dalam berbagai pH saliva buatan terhadap kekerasan permukaan material restoratif glass hybrid (EQUIA® FORTE Glass Hybrid Restorative System, GC Corporation, Japan). Jumlah spesimen 90 buah terbagi dalam sembilan kelompok perlakuan yaitu perendaman dalam saliva buatan dengan pH 4,5; 5,5; dan 7 dengan waktu perendaman masing-masing 1 jam, 24 jam, dan 72 jam pada suhu 37oC. Uji kekerasan permukaan menggunakan Knoop Microhardness Tester (Shimadzu HMV-G Micro Hardness Tester, Japan) dengan beban 50 gram selama 15 detik sebanyak 5 indentasi pada tiap spesimen. Hasil data dianalisis statistik dengan One-way ANOVA (p<0,05). Hasil penelitian menunjukkan terdapat perbedaan bermakna pada setiap kelompok perlakuan yaitu nilai kekerasan pada perendaman dengan larutan saliva buatan pH 4,5 dan lama perendaman 1 jam, 24 jam, dan 72 jam berturut-turut adalah sebesar 69,48 0,57 KHN, 54,76 0,23 KHN, dan 42,90 0,41 KHN. Sementara itu, nilai kekerasan dengan saliva buatan pH 5,5 dan lama perendaman 1 jam, 24 jam, dan 72 jam berturut-turut adalah sebesar 75,34 0,32 KHN, 57,45 0,47 KHN, dan 45,84 0,27 KHN. Dengan larutan saliva buatan pH 7 dan lama perendaman 1 jam, 24 jam, dan 72 jam didapatkan nilai kekerasan berturut-turut adalah 82,89 0,68 KHN, 62,49 0,37 KHN, dan 49,84 0,14 KHN. Disimpulkan bahwa dengan menurunnya pH saliva buatan dan semakin lamanya perendaman dapat menurunkan nilai kekerasan permukaan material restoratif glass hybrid.

---

This study aims to determine the effect of immersion time in various pH of artificial saliva on the surface hardness of glass hybrid restorative materials (EQUIA® FORTE Glass Hybrid Restorative System, GC Corporation, Japan). There were 90 specimens (diameter 6mm, thickness 3mm), and the specimens were divided into nine groups immersed in artificial saliva with pH 4,5; 5,5; and 7 for 1 hour, 24 hours, and 72 hours at 37oC respectively. The surface hardness of each specimens were tested using Knoop Microhardness Tester (Shimadzu HMV-G Micro Hardness Tester, Japan) with 50 grams load for 15 seconds, with 5 indentations on each specimens. The statistical analysis using One-way ANOVA (p<0,05) showed that there were significant differences between each groups.

The result showed that the hardness number of the groups immersed in artificial saliva pH 4,5 for 1 hour, 24 hours, and 72 hours respectively are 69,48 0,57 KHN, 54,76 0,23 KHN, and 42,90 0,41 KHN. Meanwhile, the hardness number of the groups immersed in artificial saliva pH 5,5 for 1 hour, 24 hours, and 72 hours respectively are 75,34 0,32 KHN, 57,45 0,47 KHN, and 45,84 0,27 KHN. With artificial saliva of pH 7 for 1 hour, 24 hours, and 72 hours, the hardness number are 82,89 0,68 KHN, 62,49 0,37 KHN, and 49,84 0,14 KHN. It can be concluded that the lower pH value of artificial saliva and prolonged immersion time can reduce the surface hardness value of glass hybrid restorative materials."

"Penelitian ini bertujuan untuk mengetahui pengaruh lama perendaman dalam saliva buatan terhadap perubahan pH-nya dan kekasaran permukaan resin komposit Giomer Bulk-Fill. Jumlah spesimen 63 buah dibagi dalam sembilan kelompok perlakuan yaitu perendaman dalam saliva buatan pH 7; 5,5; dan 4,5 selama masing-masing 1 jam, 24 jam, dan 72 jam pada suhu 370C. Perubahan pH saliva buatan diukur menggunakan pH meter dan pengujian kekasaran permukaan spesimen menggunakan surface roughness tester. Hasil menunjukkan bahwa terdapat perbedaan yang bermakna pada setiap kelompok perlakuan.

---

This study aimed to determine the effect of immersion time on artificial saliva pH changes and surface roughness of Giomer Bulk Fill composite resin. Sixty three specimens were divided into nine groups with immersion in artificial saliva pH 7, 5.5, and 4.5 for 1 hour, 24 hours, and 72 hours at 370C respectively. The changes in artificial saliva pH were measured using a pH meter and the surface roughness measured using surface roughness tester. The results showed that there were significant differences between each groups."

"Latar Belakang: Dalam dunia kedokteran gigi, terdapat banyak pilihan material restoratif yang dapat digunakan, salah satunya yaitu resin komposit. Seiring dengan perkembangan teknologi, para peneliti berhasil mengembangakan resin komposit baru yaitu Bulk-Fill. Sebagai contoh adalah resin komposit Giomer Bulk-Fill yang memiliki berbagai sifat seperti sifat mekanik, fisis dan biologis. Namun, belum ada penelitian pada resin komposit Giomer Bulk-Fill yang secara spesifik menguji nilai kekuatan tarik diametral yang merupakan salah satu sifat mekanik material restoratif.Tujuan Penelitian: Penelitian ini bertujuan untuk mengetahui pengaruh lama perendaman 1, 24, dan 72 jam serta perbedaan nilai pH saliva buatan 7; 5,5; dan 4,5 terhadap kekuatan tarik diametral resin komposit Giomer Bulk-Fill.Metode: Penelitian eksperimental laboratorik dengan menggunakan 90 spesimen berbentuk silindris pejal dengan diameter 6 mm dan tinggi 3 mm yang diuji menggunakan Universal Testing Machine (Shimadzu AGS-X 5kN, Japan) dan dibagi ke dalam 3 kelompok pH larutan saliva buatan yaitu 7; 5,5; dan 4,5; serta 3 kelompok lama perendaman yaitu 1, 24, dan 72 jam.Hasil: Hasil pengujian menggunakan uji One-way ANOVA menunjukkan adanya perbedaan bermakna pada spesimen-spesimen yang digunakan (p<0,05). Pada kelompok spesimen yang direndam dalam larutan saliva buatan dengan pH 7, hasil rerata kekuatan tarik diametral pada perendaman selama 1 jam adalah sebesar 36,7 ± 2,7 MPa. Kemudian mengalami penurunan setelah perendaman 24 jam dengan rerata nilai kekuatan tarik diametralnya sebesar 35,2 ± 2,2 MPa dan meningkat kembali setelah perendaman 72 jam dengan hasil rerata kekuatan tarik diametralnya sebesar 40,1 ± 3,6 MPa. Pada kelompok spesimen yang direndam dalam larutan saliva buatan dengan pH 4,5, pada perendaman selama 1 jam hasil rerata kekuatan tarik diametralnya sebesar 33,6 ± 2,4 MPa. Kemudian setelah perendaman 24 jam dan 72 jam meningkat menjadi 42,6 ± 2 MPa dan 44,2 ± 2,8 MPa. Pada kelompok spesimen yang direndam dalam larutan saliva buatan dengan pH 5,5, hasil rerata kekuatan tarik diametral setelah perendaman selama 1 jam adalah sebesar 34 ± 2,4 MPa. Namun, terjadi perbedaan jika dibandingkan dengan kelompok pH 4,5 yaitu pada kelompok dengan pH 5,5 pada lama perendaman 24 jam terjadi peningkatan yaitu sebesar 44,7 ± 2,8 MPa kemudian menurun setelah perendaman 72 jam dengan nilai rerata sebesar 39 ± 3,3 MPa.Kesimpulan: Nilai kekuatan tarik diametral resin komposit Giomer Bulk-Fill tidak dipengaruhi oleh pH saliva buatan 4,5; 5,5; dan 7 yang digunakan di dalam penelitian ini. Nilai kekuatan tarik diametral resin komposit Giomer Bulk-Fill yang direndam selama 1, 24, dan 72 jam di dalam saliva buatan dengan pH 4,5; 5,5; dan 7 secara umum mengalami peningkatan sehingga lama perendaman dalam penelitian ini mempengaruhi nilai kekuatan tarik diametral resin komposit Giomer Bulk-Fill.

---

Background: In the world of dentistry, there are many choices of restorative materials that can be used, one of them is composite resin. Along with the development of technology, the researchers succeeded in developing a new composite resin called Bulk-Fill. One example is Giomer Bulk-Fill composite resin which has various properties such as mechanical, physical and biological properties. However, there is no research on Giomer Bulk-Fill composite resin which specifically tests the value of diametral tensile strength which is one of the mechanical properties of restorative material.

Objective: This study aims to determine the effect of immersion time and the difference in pH value 7; 5,5; and 4,5 of the artificial saliva solution on the value of diametral tensile strength of Giomer Bulk-Fill composite resin.

Method: Laboratory experimental research using 90 solid cylindrical specimens with a diameter of 6 mm and a height of 3 mm which were tested using Universal Testing Machine (Shimadzu AGS-X 5kN, Japan) and were divided into 3 groups pH of artificial saliva solution (7; 5.5; and 4.5) and 3 groups of immersion periods (1, 24 and 72 hours).

Results: The test results using the One-way ANOVA test showed significant differences in the specimens used (p <0.05). In the group of specimens which were immersed in artificial saliva solution with pH 7, the results of the average diametral tensile strength at immersion for 1 hour were 36.7 ± 2.7 MPa. Then it decreased for 24 hours immersed time with a mean value of diametral tensile strength of 35.2 ± 2.2 and increased again at 72 hours immersed time with an average value of diametral tensile strength 40.1 ± 3.6 MPa. In the group of specimens which were immersed in artificial saliva solution with pH 4.5, at immersion for 1 hour the average value of diametral tensile strength was 33.6 ± 2.4 MPa. Then in 24-hour and 72-hour immersion, it increased to 42.6 ± 2 MPa and 44.2 ± 2.8 MPa. In the group of specimens immersed in artificial saliva solution with a pH of 5.5, the average value of diametral tensile strength for 1 hour was 34 ± 2.4 MPa. However, there was a difference when compared to the pH 4.5 group, which was in the group with a pH of 5.5 in the 24-hour immersion period, the value increase for 44.7 ± 2.8 MPa and then decreased for 72 hours of immersion with an average value of 39 ± 3.3 MPa.

Conclusion: The value of diametral tensile strength of Giomer Bulk-Fill composite resin is not affected by pH of artificial saliva 4.5; 5.5; and 7 that used in this study. The value of diametral tensile strength of Giomer Bulk-Fill composite resin, which is immersed for 1, 24, and 72 hours in artificial saliva with pH 4.5; 5.5 and 7 generally increased so that the immersion time in this study affected the diametral tensile strength of Giomer Bulk-Fill composite resin."