Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Tri Arini
The influence of deposition time and substrate temperature during the spray pyrolysis process on the electrical resistivity and optical transmittance of 2 wt% fluorine-doped tin oxide conducting glass
" Transparent conducting oxide (TCO) glasses play an important role in various technology, including dye sensitized solar cells. One of the most commonly used glass is indium tin oxide (ITO) glass, which is expensive. Therefore, the main purpose of this research was to determine if ITO glass can be replaced with fluorine-doped tin oxide (FTO) glass, which is easier and more economic to manufacture. For this purpose, a tin chloride dehydrate (SnCl2.2H2O) precursor was doped with ammonium fluoride (NH4F) using a sol-gel method and spray pyrolysis ... "
2016
J-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Tri Arini
The influence of deposition time and substrate temperature during the spray pyrolysis process on the electrical resistivity and optical transmittance of 2 wt% fluorine-doped tin oxide conducting glass
" Transparent conducting oxide (TCO) glasses play an important role in various technology, including dye sensitized solar cells. One of the most commonly used glass is indium tin oxide (ITO) glass, which is expensive. Therefore, the main purpose of this research was to determine if ITO glass can be replaced with fluorine-doped tin oxide (FTO) glass, which is easier and more economic to manufacture. For this purpose, a tin chloride dehydrate (SnCl2.2H2O) precursor was doped with ... "
Depok: Faculty of Engineering, Universitas Indonesia, 2017
UI-IJTECH 7:8 (2016)
Artikel Jurnal  Universitas Indonesia Library
cover
Akhmad Herman Yuwono
The effect of various precursors and solvents on the characteristics of fluorine-doped tin oxide conducting glass fabricated by ultrasonic spray pyrolysis
" Transparent conductive oxide (TCO) glass is one of most important components in dye-sensitized solar cell (DSSC) device. In addition to its high electrical conductivity, transparency is another important requirement that must be achieved in fabricating TCO. One TCO film is fluorine-doped tin oxide (FTO), which can be considered as the most promising substitution for indium-doped tin oxide (ITO), since the latter is very expensive. However, the fabrication techniques for TCO film need to be carefully ... "
Depok: Faculty of Engineering, Universitas Indonesia, 2017
UI-IJTECH 8:7 (2017)
Artikel Jurnal  Universitas Indonesia Library