Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 5 dokumen yang sesuai dengan query
cover
Badruzzaman
"Perawat adalah salah satu komponen dari unsur pelayanan kesehatan, dimana salah satu faktor yang dapat mempengaruhi kinerja perawat adalah kompetensi yang pernah didapatkan selama dalam pendidikan. Faktor penentu dalam proses pendidikan adalah dosenltenaga pengajar dengan kinerjanya yang optimal. Oleh karena itu kinerja dosen sangat panting untuk diteliti terutama untuk mengetahui tingkat kinerjanya dan faktor-faktor yang berhubungan dengan kinerja tersebut.
Disain penelitian ini adalah survei dengan pendekatan cross sectional. Penelitian dilakukan pada Poltekkes Jurusan Keperawatan Depkes RI Banda Aceh. Sebagai subyek penelitian adalah semua dosen tetap dan dosen tidak tetap yang mengajar di institusi Poltekkes Jurusan Keperawatan. Jumlah seluruhnya 35 orang. Pengumpulan data primer dilakukan dengan memberikan kuesioner pada responden untuk diisi. Penilaian kinerja dosen dilakukan oleh Mahasiswa dari Poltekkes Jurusan Keperawatan dengan menggunakan instrumen penilaian kinerja.
Hasil analisis univarian menunjukan bahwa skor kinerja rata-rata dosen sebesar 19,5 (kemungkinan dari maximum 34) dengan standar deviasi 3,34 nilai kinerja terendah 10 dan tertinggi 27 serta proporsi kinerja kurang sebanyak 31,4 % dan proporsi kinerja cukup sebesar 68,6 %. Dan analisis bivariat menunjukan ada hubungan yang bermakna antara umur dan pengalaman mengajar denga kinerja dosen (P<0,05). Sedangkan Jenis kelamain, status perkawinan, status mengajar, latar belakang pendidikan, akta mengajar, ikut pelatihan, persepsi terhadap pendapatan, fasilitas pendidikan, pembinaan dan motivasi tidak ada hubungan yang bermakna dengan kinerja dosen (p>0,05).
Untuk meningkatkan kinerja dosen maka disarankan kepada ketua jurusan keperawatan supaya dapat mendorong dosen-dosen muda untuk mengembangkan pengetahuannya dan meningkatkan pengelaman mengajarnya dan selanjutnya penelitian ini perlu diteruskan secara lebih mendalam tentang faktor-faktor yang berhubungan dengan kinerja dosen.
Daftar bacaan : 39 (1980-2001)

Nurse is one critical human resources in the health care service. Their competencies established during their studies in the Health Polytechnic. In this relation, lecturers' performance is one important factor in the educational process. It is therefore, this study was conducted which is to determine performance level and factors relate to it.
This study was cross sectional survey. Respondents were all lecturers' of Nursing Department of Health Polytechnic of Ministry of health at Banda Aceh province; with a total of 35 respondents Data were collected with structured questioners, where the lecturers and selected students were chosen to evaluate the lecturers' performance.
Univariat statistics show that average performance score is 19,5 (of 34 as maximum score) and 3,34 standard deviation (minimum 10 and maximum 27)
By using 50% normative cut-off, i,e, 17 out of 34, it is found that 31,4% lecturers were low performance and 68,6% adequate performance.
Bivariate analysis showed that only two independent variables, i,e; age and years of experience , that related significantly with performance variable. Other variables such as sex, manage status, employment status, education background, Akta training, other training experience, perceived income, educational facilitese, supervision and motivation level did not show significant relationship (p>0,05).
This study recommends that the Nursing. Department should provide educational infrastructure that support retivities to expand knowledge and teaching experience of the lecturers. Furthermore, more studies are needed to carefully examine factors related lecturers' performance.
Bibliography 39(1984-2001).
"
Depok: Universitas Indonesia, 2003
T12680
UI - Tesis Membership  Universitas Indonesia Library
cover
Badruzzaman
"Mikrofluidik merupakan ilmu yang mengacu pada bidang sains dan teknologi dengan salah satu bidangnya adalah biomedical untuk memanipulasi fluida dalam suatu jaringan di dalam channel yang dimensinya antara 5 - 500 µm. Tahapan proses yang dilakukan pada teknologi microfabrication yaitu desain, microstucturing dan back-end processes. Passive mixing adalah proses pencampuran fluida dimana fluida yang bergerak dan part pencampur diam tanpa ada pergerakan dan tekanan dari luar atau proses pencampurannya terjadi karena bentuk desain channel yang khusus untuk pencampuran tersebut. Desain passive mixing adalah suatu bentuk dari channel yang di inginkan. Microstucturing adalah metode teknologi yang digunakan untuk pembentukan mikrofluidik, sedangkan back-end processes merupakan proses untuk joining material yang telah dilakukan pembentukan channel.
Dalam penelitian ini, proses desain channel menggunakan software autodesk inventor. Untuk proses microstucturing menggunakan laser CO2 daya rendah. Penggunaan laser CO2 sebagai alat pemotong untuk pembentukan mikrofluidik pada material acrylic menggunakan parameter yang dapat mempengaruhi hasil pemotongan, yaitu daya laser, kecepatan pemotongan dan ukuran jarak desain, kemudian dilakukan pengamatan terhadap hasil pemotongan tersebut yaitu ukuran hasil pemotongan dengan microscope digital microchannels serta dengan alat uji surface roughness. Tahapan terakhir dari microfabrication adalah back-end processes, proses joining dengan menggunakan metode thermal bonding untuk membuat mikrofluidik yang dibentuk dapat berfungsi dengan baik. Dari hasil penelitian pembentukan perangkat mikrofluidik dan percobaan pengaliran cairan pada channel yang merupakan bagian dari perangkat mikrofluidik telah berhasil dilakukan.

Microfluidics is a science which refers to the field of science and technology is one of the biomedical fields to manipulate fluids in a channel network in the dimensions between 5-500 µm. Stages of the process are carried out in microfabrication technology which are designs, microstucturing and back-end processes. Passive mixing is the process of mixing of the fluid in which the fluid is moving and stationary parts mixer without any movement and pressure from the outside or the mixing process occurs due to the special form of channel design for the mixing. Design is a form of passive mixing of the desired channel. Microstucturing technology is a method used to mikrofluidics formation, while the back-end processes is the process for joining materials that have done channel formation.
In this study, the process of channel design used Autodesk Inventor software. For microstucturing process used low-power CO2 laser. CO2 laser was used as a cutting tool for microfluidic fabrication on acrylic material the parameters that can affect the outcome are the cutting, the laser power, cutting speed and distance measures design. Then observations on the results of the cuts was perfomed by measuring the results of cutting the microchannels with digital microscope and surface roughness equipment. Final stage of the microfabrication was the back-end processes which are joining processes using thermal bonding method for making microfluidics to be function properly. The establishment of research and experiments on microfluidic flow of fluid in the channel which is part of the microfluidic has been successfully carried out.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
T35405
UI - Tesis Membership  Universitas Indonesia Library
cover
Badruzzaman
Jakarta: Departemen Pendidikan dan Kebudayaan, 1979
899.22 BAD p
Buku Teks SO  Universitas Indonesia Library
cover
Nofiandri Badruzzaman
"ABSTRAK
Untuk mewujudkan bali eco smart grid, PLN Bali mengimplementasikan Advance metering infrastructure (AMI) melalui penggelaran pilot project 1.000 smart meter 2 arah berkonsep LPWAN di daerah Kuta, Bali. Pemilihan LPWAN LoRa sebagai akses smart meter dikarenakan perhitungan biaya, kemudahan implementasi dan kesiapan teknologinya. Pada tesis ini akan dibahas aspek teknologi dan aspek ekonomi implementasi smart meter reading 2 arah. Meliputi kebutuhan perangkat smart meter berbasis LoRa, biaya operasional (OPEX) dan biaya investasi (CAPEX). Guna mendukung suksesnya penggelaran Bali eco smart grid, maka disusun strategi implementasi menggunakan analisis SWOT. Melalui kajian tekno-ekonomi dan survey yang dilakukan langsung terhadap pelanggan PLN di wilayah Bali, dirumuskan faktor-faktor eksternal maupun faktor-faktor internal utama sehingga menghasilkan beberapa alternatif strategi implementasi penerapan smart meter reading menggunakan teknologi LPWAN, antara lain dengan melakukan ujicoba penerapan AMI, Peningkatan kualitas SDM melalui seminar maupun studi literatur, melakukan outsourcing ke pihak ketiga, pendekatan terhadap regulator terkait ketersediaan alokasi frekuensi dan juga penyuluhan tentang fitur-fitur yang terdapat pada smart meter AMI.

ABSTRACT
To realize Bali eco smart grid, PLN Bali is implementing Advance Metering Infrastructure (AMI) through the deployment of 1,000 smart meter 2-way pilot project with LPWAN concept in Kuta area, Bali. The selection of LPWAN LoRa as smart meter access due to cost calculation, ease of implementation and technological readiness. In this thesis will be discussed aspects of technology and economic implementation of smart meter reading 2 way. Includes the needs of smart meter devices based on LoRa, operational cost (OPEX) and investment cost (CAPEX). In order to support the successful deployment of Bali eco smart grid, an implementation strategy is developed using SWOT analysis. Through techno-economic and surveys conducted directly to PLN customers in Bali area, formulated external factors as well as the main internal factors so as to generate some alternative implementation strategy of smart meters reading application using LPWAN technology, among others by conducting pilot project of AMI, Increasing the quality of human resources through seminars and literature studies, outsourcing to third parties, approaches to regulators related to the availability of frequency allocation and also extension about the features contained in the AMI smart meter."
Depok: Fakultas Teknik Universitas Indonesia, 2018
T50330
UI - Tesis Membership  Universitas Indonesia Library
cover
Fahmi Taufikurrahman Badruzzaman
"Pada studi terdahulu, ekspresi emosi pelapor ditemukan berperan dalam mempengaruhi persepsi kredibilitas laporan kasus kekerasan seksual. Meskipun ekspresi emosi pelapor tidak berkaitan dengan kejujuran dan kebenaran laporan, laporan yang menunjukkan pelapor dengan ekspresi emosi negatif ditemukan lebih dipersepsikan kredibel dibanding laporan dari pelapor dengan ekspresi emosi netral atau disebut juga sebagai Emotional Victim Effect (EVE). Untuk lebih jauh memahami pengaruh EVE pada persepsi kredibilitas laporan kasus kekerasan seksual, peneliti melakukan penelitian eksperimen dengan melibatkan petugas kepolisian Indonesia (N=140) yang direkrut melalui Sekolah Tinggi Ilmu Kepolisian dan Unit Pengaduan Perempuan dan Anak (PPA) Polda Metro Jaya. Partisipan polisi mendapatkan video stimulus yang berisikan tayangan seorang perempuan dewasa muda melaporkan kekerasan seksual yang dialaminya. Peneliti melakukan manipulasi variabel ekspresi emosi yang mempresentasikan pelapor dengan ekspresi emosi negatif dan ekspresi emosi netral. Temuan utama menunjukkan tidak adanya pengaruh yang signifikan dari ekspresi emosi negatif pelapor terhadap persepsi petugas polisi terkait kredibilitas laporan kekerasan seksual. Namun, temuan eksploratif menunjukkan adanya kehadiran EVE pada dua aspek persepsi kredibilitas laporan dari pelapor dengan ekspresi emosi negatif. Temuan penelitian ini menyarankan adanya peningkatan kapasitas bagi petugas polisi terkait isu korban kekerasan seksual dan juga pengembangan metode dalam investigasi kredibilitas yang lebih objektif dan akurat.

Previous studies shown that the emotional expression of complainant was found to play a role in influencing the credibility of sexual violence allegation report cases. Although complainant's emotional expression is not related to the honesty and veracity of the complainant's statement, reports from complainant with negative emotional expressions were found to be perceived as more credible than reports from complainant with neutral emotional expressions or also known as the Emotional Victim Effect (EVE). To further understand the effect of EVE on perceived credibility of sexual violence case reports, researcher conducted an experimental study involving Indonesian police officers (N=140) who were recruited from Sekolah Tinggi Ilmu Kepolisian and Special Unit for Women and Children Case or Unit Pengaduan Perempuan dan Anak (PPA) Polda Metro Jaya. Police participants received a stimulus video containing footage of a young adult woman reporting sexual violence she had experienced. Present study manipulated the emotional expression variable which presented the complainant with negative emotional expressions and neutral emotional expressions. The main finding show that there is no significant effect of complainant's negative emotional expressions on police officer perceptions regarding the credibility of the sexual assault report. However, exploratory findings indicate the presence of EVE on two aspects of the perceived credibility of report from complainant with negative emotional expressions. The findings of this study suggest capacity building for police officers regarding the issue of victims of sexual assault and also the development of methods in investigating credibility that are more objective and accurate."
Depok: Fakultas Psikologi Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library