Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 43541 dokumen yang sesuai dengan query
cover
Bakhrul Ulum
"Excellence in skilled operation is vital for the efficiency of geothermal power plants. Mount Salak geothermal power plant unit 1-2-3 has consistently produced no less than 180 MWe to the Java-Bali grid since its first commercial operation in 1994, with an equivalent availability factor (EAF) average of 96%. Owing to this long operation period, power plant efficiency must be improved for the sustainable production of electricity. In this study, energy and exergy analysis has been undertaken to ascertain the amount of energy that is used in the power plant’s current condition, and to determine the plant’s overall system losses. Research was carried out by collecting data relating to temperature, pressure, and mass flow rate. Data were analyzed using the control volume to assess the thermal and mass balance and ascertain the value of exergy. Analysis was conducted theoretically and compared with results calculated by Engineering Equation Solver (EES) software. The results showed that from 1069.90 MWe in steam energy entering the system, the total amount of exergy was 302.42 MWe. Mount Salak geothermal power plant unit 1-2-3 had an overall first law efficiency of 16.75% and an overall second law efficiency of 59.27%. The greatest losses - 27.84% of the total exergy - were in the condensers. This was caused by the quality of cooling water entering condensers, which was in turn a result of cooling tower performance. Results suggest that turbine unit 1 should be investigated further to determine causes of decreased capacity."
Depok: Faculty of Engineering, Universitas Indonesia, 2017
UI-IJTECH 8:7 (2017)
Artikel Jurnal  Universitas Indonesia Library
cover
Yudho Hartanto
"Untuk mendapatkan skema terbaik dalam manajemen BOG dan pemanfaatan potensi eksergi LNG di fasilitas terminal regasifikasi Arun sebagai pembangkit energi listrik, maka dilakukan penelitian untuk membandingkan secara teknis dan komersial skema terbaik  pemanfaatan potensi exergi LNG dari proses regasifikasi.  Manajemen pemanfaatan BOG dengan laju  9.8 ton/jam dan pemanfaatan potensi exergi LNG dengan laju 150 ton/jam dengan teknologi Rankine Cycle (RC), Direct Expansion (DE)  atau kombinasi RC+DE untuk  pembangkit listrik diteliti dalam tesis ini.  Energi listrik yang dihasilkan dijual kepada PLN dengan skema jual beli listrik dengan harga maksimal 90% dari BPP sebesar Rp 1,673/kWh untuk Aceh dan Sumatera Utara. Data dari hasil penelitian dan simulasi sistem, didapatkan bahwa pemanfaatan potensi exergi LNG skema DE menghasilkan daya bersih listrik sebesar 2,703 kW, skema RC menghasilkan 3,916 kW, dan  skema DE+ RC menghasilkan 5,849 kW. Pendapatan dari penjualan daya listrik yang dihasilkan akan meningkatkan pendapatan operasional perusahaan.

To get the best scheme in BOG management and utilization of LNG exergy potential in the Arun LNG regasification facility to generate electricity, this research is conducted to compare the best technical and commercial schemes for utilization of LNG potential exergy from the regasification process. The management system is required to manage  BOG  flow rate 9.8 ton / hour and LNG cold energy utilization with flowrate 150 ton/hour during  regasification process to generate electricity using Direct Expansion (DE), Rankine Cycle (RC) or combined Direct Expansion + Rankine Cycle (DE+RC)  technologies are studied in this thesis. The electricity produced is sold to PLN under a power purchase scheme at a maximum price  90% from the BPP tariff Rp 1,673/kWh for Aceh dan Sumatera Utara.  Data from the results of research and system simulations, it is found that the utilization of the LNG exergy  in the DE scheme produces a net electric power of 2,703 kW, the RC scheme produces 3,916 kW, and the DE + RC scheme produces 5,849 kW.  The income from the sale of the electric power generated will increase Company's income."
Depok: Fakultas Teknik Universitas Indonesia, 2021
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Situmorang, Susanto Berlin Manarua
"Penelitian ini berfokus pada analisis dari konstruksi Pembangkit Listrik Tenaga Panas Bumi di Wilayah Kerja Panas Bumi WKP Tulehu. Salah satu sumur yang telah diuji di WKP Tulehu memproduksi fluida panas bumi dengan karakteristik low-medium enthalpy 130-165oC, low wellhead pressure 300-700 kPa, dan low mass flow rate 16,67-25 kg/s, dimana karakteristik tersebut sangat sesuai untuk diutilisasi dengan tipe binary power plant. Pembangkit listrik binary secara umum terdiri atas dua tipe Organic Rankine Cycle,yang menggunakan hidrokarbon sebagai fluida kerja, dan Kalina Cycle System, yang menggunakan campuran ammonia-air sebagai fluida kerja. Penelitian ini akan berfokus pada optimasi multiobjektif terhadap tipe pembangkit listrik binary yang paling sesuai dengan kondisi fluida panas bumi tersebut. Objektif yang akan dimasukkan dalam optimasi ini adalah Exergy Destruction dan Purchased Equipment Cost. Hasil optimasi tersebut kemudian akan digunakan sebagai basis untuk kalkulasi estimasi biaya proyek pembangkit listrik yang dicanangkan. Dengan begitu akan diperoleh tipe pembangkit listrik binary yang paling sesuai untuk digunakan di WKP tersebut. Simulasi dan optimasi dilakukan dengan menggunakan Matlab dan Engineering Equation Solver EES .

This study focuses on simulation and optimization of the binary cycle power plant on Tulehu Geothermal Field. One of the tested well in the field produces geothermal fluid with characteristics such as low to medium temperature 130 165oC, low wellhead pressure 3-7 bar, and low mass flow rate 16,67 ndash 25 kg s, in which those characteristics are suitable for binary cycle power plant. Binary power plant can be categorized into two types, Organic Rankine Cycle, which uses hydrocarbon as its working fluid, and Rankine Cycle System, which uses ammonia water mixture as its working fluid. The study will mainly focuses on the optimization of the types of binary power plant with multiobjectives. Those objectives which will be included are Exergy Destruction and Purchased Equipment Cost. The results then will be used as basis for the estimation of the power plant project total cost. By using those method we will be able to find out the solution to which one of the types that have the best output for possible later use on the geothermal field. The simulation and optimization will be conducted by using Matlab and Engineering Equation Software EES."
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Arief Surachman
"Dalam rangka upaya memenuhi target pemerintah yaitu pengembangan pembangkit listrik tenaga panas bumi PLTP pada tahun 2025 ditargetkan sebesar 7.242 MW, maka tentu saja akan diperlukan data tentang desain PLTP yang paling optimal yang dapat diterapkan pada seluruh kondisi sumber panas bumi. Dengan demikian, diperlukan panduan desain yang dibuktikan secara ilmiah untuk pembangunan PLTP. Dalam dekade terakhir ini, banyak peneliti yang menganalis atau merancang sistem energi dengan menggabungkan antara analisis energi, exergy dan thermoekonomik. Hal ini dimaksudkan dalam upaya peningkatan efisiensi serta mengurangi kerugian-kerugian yang ditimbulkan oleh ketidakefisienan sistem.
Melalui analisa yang komprehensif dengan menggabungkan analisa energi, exergy, exergoeconomics serta exergoenvironment, maka diharapkan dapat menjadi panduan desain yang paling optimum dengan mempertimbangkan segala aspek, baik aspek teknologi, ekonomi dan lingkungan yang dapat diaplikasikan untuk berbagai kondisi sumber panas bumi di Indonesia. Untuk itulah pada disertasi ini dilakukan analisa dan optimasi 3E exergy,economic,environment. Pemodelan dan optimasi sistem PLTP dilakukan menggunakan software EES dan diintegrasikan dengan MATLAB.
Dari hasil analisis 3E, dapat diketahui bahwa komponen seperti turbin dan cooling tower merupakan komponen yang menyumbang nilai exergy destruction, total cost dan exergoenvironment yang paling besar dibandingkan komponen lainnya.

In order to reach the government 39;s target of building geothermal power plant PLTP in 2025 of 7,242 MW, then it will need data about the most optimal PLTP design that can be applied to all geothermal conditions. Thus, the design required for the construction of PLTP. In the last decade, many researchers have analyzed and discussed energy systems with energy, exergy and thermoeconomic analyzes. This is necessary in an effort to increase and reduce the losses caused by system inefficiencies.
Through a comprehensive analysis with energy analysis, exergy, exergoeconomics and exergoenvironment, it is expected to be the most optimal design with good aspects, economics and environment that can be used for various geothermal conditions in Indonesia. For analysis, it was conducted 3E exergy, economy, environment analysis on this dissertation. By using EES software and integrated with MATLAB, the PLTP system can be modeled and optimized.
From the results of 3E analysis, it can be seen that components such as turbines and cooling towers are the components that contribute the largest value of total exergy destruction, total cost and exergoenvironment compared to other components.
"
Depok: Fakultas Teknik Universitas Indonesia, 2018
D2483
UI - Disertasi Membership  Universitas Indonesia Library
cover
Dicky Nurachman
"Sebagai negara dengan sumber daya energi panas bumi yang melimpah, Indonesia memiliki peluang untuk mengalokasikan energi panas bumi sebagai energi terbarukan terdepan untuk menggantikan ketergantungan pada energi minyak dan gas. Namun, ada beberapa tantangan yang dihadapi pengembang, yaitu tantangan teknologi, finansial dan kebijakan. Dengan demikian, membuat proyek panas bumi kurang menarik bagi investor untuk berinvestasi di sektor energi ini. Khususnya, tantangan finansial yang akan menjadi perhatian besar bagi pengembang untuk diatasi. Analisis kelayakan investasi diperlukan untuk mengatasi masalah ini untuk menarik lebih banyak investor. Penelitian ini bertujuan untuk menganalisis kelayakan investasi proyek panas bumi di PLTP Lumut Balai dengan merumuskan pemodelan pembiayaan yang optimal dan efisien dan melakukan pendekatan probabilistik dengan simulasi Monte Carlo. Dalam hal ini, dampak feed-in-tariff dan tahun COD akan dinilai melalui enam skenario yang akan disimulasikan dalam model. Hasil menunjukkan bahwa feed in tarif dan tahun COD memainkan peran penting dalam menentukan daya tarik kelayakan proyek panas bumi di Indonesia.

As the country with abundant resource of geothermal energy, Indonesia has the opportunity to allocate the geothermal energy as the leading renewable energy to substitute dependency on oil and gas energy. However, there are some challenges that developers faced, which are technology, financial, and policy challenges. Thus, making the geothermal project less attractive for investors to invest in this energy sector. Notably, the financial challenge that will be close attention for private sectors to tackle. Feasible financing is needed to tackle this issue to attract more investors. This paper aims to analyze the feasibility investment of a geothermal project in Lumut Balai geothermal power plant with formulating the optimal and efficient financial modeling and performing a probabilistic approach with Monte Carlo simulation. In this regard, the impact of feed-in-tariff and year of COD will be assessed through six scenarios that will be simulated in the model. The results indicate that feed-in-tariff and year of COD plays a significant role in determining the attractiveness of a geothermal project in Indonesia."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Agung Satrio Wibowo
"Penelitian berfokus pada analisis penerapan double stage absorption system untuk meningkatkan kinerja Pembangkit Listrik Tenaga Panas Bumi Kamojang Unit V. Panas yang diambil berasal dari abandoned well sekitar Kamojang yang masih memiliki tekanan 400 kPa. Terdapat beberapa analisis yang dilakukan yaitu analisis exergy pada kondisi operasi, optimasi efisiensi exergy, optimasi biaya dan optimasi multi objektif. Perhitungan dilakukan dengan program Matlab, dan optimasi optimtool. Tekanan operasi saat ini menghasilkan efisiensi exergy 44.93. Optimasi single objektif sistem gabungan menghasilkan efisiensi exergy sebesar 52.66 , biaya 3558400. Optimasi single objektif biaya menghasilkan exergy 51.55 dengan biaya 2514000 dan Optimasi objektif menghasilkan efisiensi 48.64 dengan biaya 2913700 dengan parameter optimum tekanan scrubber 782.64 kPa, beda temperatur air pendingin 3.12°C, temperatur evaporator 7.6°C, temperatur desorber 120.08°C, temperatur condenser 44.9°C, temperatur absorber 43.79°C.

This study focusses on implementation of double stage absorption to improve performance of Kamojang 5 GPP rsquo s. Heat recovery used for optimization, utilized from abandoned well that still have 400 kPa saturation pressure. There are several optimization conducted in this study, there are exergetic efficiency, annual cost, and multi objective optimization. Calculations are conducted by using MATLAB, and optimtool function. The wellhead pressure operational condition has exergetic efficiency 42.4. Exergetic optimization of integrated system has 54.7 exergetic efficiency and system cost 3558400. Economic optimization has exergetic efficiency 44.3 and system cost 2598100. While, multiobjective optimization has exergetic efficiency 51.9 and system cost 2861900 with optimum parameters scrubber pressure 782.64 kPa, temperatur delta of cooling water 3.12°C, evaporator temperature 7.6°C, desorber temperature 120.08°C, condenser temperature 44.9°C, and absorber temperature 43.79°C."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S68287
UI - Skripsi Membership  Universitas Indonesia Library
cover
cover
Nadhifa Rahma Tsany
"Penelitian ini berfokus pada menganalisis potensi terhadap manifestasi panas bumi berupa mata air panas yang berada di permukaan dan dapat diasosiasikan pada suatu sumber panas bumi di kedalaman permukaan. Lapangan daerah Maranda – Kawende, Kabupaten Poso, Provinsi Sulawesi Tengah, merupakan salah satu wilayah di Indonesia yang memiliki potensi panas bumi. Penelitian ini menggunakan dua metode yaitu, metode analisis geokimia air dan metode penginderaan jauh. Penelitian ini bertujuan untuk mengetahui karakteristik fluida air panas serta menentukan temperatur yang berada di bawah permukaan pada wilayah panas bumi daerah Maranda - Kawende. Data yang digunakan pada penelitian kali ini yaitu data sekunder salah satunya diambil oleh PSDMBP yang berfokus kepada data kation, anion serta pH. Terdapat persebaran manifestasi panas bumi berupa air panas dan air dingin yang terdiri dari dua mata air dingin, tiga air sungai, satu air laut dan dua puluh dua mata air panas. Pada analisis dari ke dua puluh tujuh manifestasi permukaan panas bumi berdasarkan analisis geokimia air didapatkan bahwa tipe air panas bumi menunjukan tipe air klorida dan klorida-bikarbonat. Sumber air panas bumi tidak bersumber dari satu reservoir yang sama serta kondisi air panas berada di fase immature waters dan partial equilibration diketahui juga air panas berasal dari air meteorik yang didominasi oleh air yang sudah mengalami pencampuran oleh air permukaan. Berdasarkan geoindikator didapatkan zona upflow berada di titik Ap.Maranda I. Pada metode penginderaan jauh mengintegrasikan beberapa data meliputi LST, NDVI, dan FFD serta data sekunder lainnya meliputi data geologi dan manifestasi permukaan. Melalui analisis tersebut, didapatkan hasil bahwa terdapat empat area potensi panas bumi. Area potensi A terletak pada daerah Maranda dengan koordinat UTM 227925 - 226909 mE dan UTM 9856819 - 9865793 mN serta memiliki luas 22 hektar. Area potensi B terletak pada Daerah Pantangolemba dengan koordinat 229991 - 233563 mE dan 9846449 - 9842678 mN serta memiliki luas 13 hektar. Area potensi C terletak pada daerah Pakareme dengan koordinat 220267 - 224571 mE dan 9878781 - 9875298 mN serta memiliki luas 14 hektar. Area potensi D terletak pada Daerah Pantangolemba dengan koordinat 216289 – 220800 mE dan 9866259 – 9863881 mN serta memiliki luas 10 hektar.

This research focuses on analyzing the potential for geothermal manifestations in the form of hot springs that are on the surface and can be associated with a geothermal source in the depths of the surface. The Maranda – Kawende Regional Field, Poso Regency, Central Sulawesi Province, is one of the areas in Indonesia that has geothermal potential. This study uses two methods, namely, the method of water geochemical analysis and remote sensing methods. This study aims to determine the characteristics of the hot water fluid and determine the temperatur below the surface in the geothermal area of ??Maranda - Kawende. The data used in this research is secondary data, one of which was taken by PSDMBP which focuses on cation, anion and pH data. There is a distribution of geothermal manifestations in the form of hot water and cold water consisting of two cold springs, three rivers, one seawater and twenty-two hot springs. In the analysis of the twenty-seven geothermal surface manifestations based on water geochemistry analysis, it was found that the type of geothermal water shows the type of chloride and chloride-bicarbonate water. Geothermal water sources are not sourced from the same reservoir and the condition of the hot water is in the immature waters and partial equilibration phases. It is also known that hot water comes from meteoric water which is dominated by water that has experienced mixing with surface water. Based on the geoindicator, the upflow zone is located at Ap.Maranda I point. The remote sensing method integrates several data including LST, NDVI, and FFD as well as other secondary data including geological data and surface manifestations. Through this analysis, the results show that there are four geothermal potential areas. First, Potential area A is located in the Maranda Region with coordinates UTM 227925 - 226909 mE and UTM 9856819 - 9865793 mN and has an area of ??22 hectares. Second, potential area B is located in the Pantangolemba Region with coordinates 229991 - 233563 mE and 9846449 - 9842678 mN and has an area of ??13 hectares. Third, potential area C is located in the Pakareme Region with coordinates 220267 - 224571 mE and 9878781 - 9875298 mN and has an area of ??14 hectares. Potential area D is located in the Pantangolemba Region with coordinates 216289 – 220800 mE and 9866259 – 9863881 mN and has an area of ??10 hectares."
Depok: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fahmi Firdaus Angkasa
"Pada tahun 2025 pemerintah menargetkan peran energi baru terbarukan (EBT) minimal 23% dari bauran energi nasional ketenagalistrikan. Salah satu jenis EBT adalah panas bumi yang menjadi salah satu potensi yang besar. Berdasakan data Kementiran ESDM, potensi energi panas bumi sebesar 28.579 MWe yang terdiri dari sumber daya sebesar 11.073 MWe dan cadangan sebesar 17.506 MWe. Selain itu berdasarkan RUPTL 2019-2028, komposisi bauran energi listrik regional Sumatera akan mencapai 38,5% bersumber EBT atau mencapai total 2647,1 MW yang terdiri dari air sebesar 20,1%, panas bumi sebesar 19,5%, dan sumber EBT lainnya sebesar 1,9%. Pada tahun 2019-2023, terdapat Pembangkit Listrik Tenaga Panas Bumi (PLTP) yang direncanakan akan memasuki sistem interkoneksi Sumatera Utara pada dengan total kapasitas 240 MW. Oleh karena itu, studi interkoneksi dibutuhkan untuk mengetahui efek dari pembangkit terhadap jaringan interkoneksi dan kesesuaian dengan standar yang ada. Studi interkoneksi yang dilakukan terdiri dari studi aliran daya, studi stabilitas sistem tenaga listrik, dan studi hubung singkat menggunakan perangkat lunak DIgSILENT Power Factory 2019 SP 4. Hasil dari studi aliran daya menunjukan level tegangan pada pembangkit dan dua Gardu Induk (GI) terdekat sesuai dengan aturan yang berlaku pada Aturan Jaringan Sistem Tenaga Listrik Sumatera 2007 2.1.b yang menyebutkan standar tegangan pada jaringan interkoneksi 150 kV harus selalu diantara 135 kV dan 165 kV (±10% tegangan nominal). Selain itu, stabilitas sistem tenaga listrik dilihat dari parameter tegangan, frekuensi dan sudut rotor. Jaringan interkoneksi tetap stabil ketika ada gangguan di salah satu generator pembangkit, gangguan di satu atau dua saluran antara pembangkit dan GI terdekat, dan pelepasan beban di salah satu GI. Ketidakstabilan terjadi ketika dua GI terdekat terisolasi dengan jaringan interkoneksi Sumatera yang menghasilkan pemadaman total. Sementara itu, penambahan kapasitas pembangkit pada sistem interkoneksi 150 kV Sumatera Utara menyebabkan nilai arus hubung singkat di GI meningkat. Seluruh nilai arus hubung singkat masih memenuhi standar IEEE Std C37.06-2009.

In 2025 the government is targeting the renewable energy at least 23% of the national electricity energy mix. One type of renewable energy is geothermal which has a great potential. Based on the Ministry of Energy and Mineral Resources Republic of Indonesia data, the potential for geothermal energy is 28,579 MWe consisting of resources 11,073 MWe and reserves 17,506 MWe. Further based on 2019-2028 RUPTL, the composition of Sumatra's regional electric energy mix will reach 38.5% from renewable sources or reach a total of 2647.1 MW consisting of water 20.1%r, geothermal 19.5%, and other renewable sources by 1.9%. In 2019-2023, there is a Geothermal Power Plant which is planned to enter the North Sumatra interconnection system with a total capacity of 240 MW. Therefore, an interconnection study is needed to determine the effect of the new power plant on the interconnection grid and compliance with the standards. Interconnection studies carried out consist of power flow, stability, and short circuit study using the DIgSILENT Power Factory 2019 SP 4 software. The results of the power flow study show that the voltage level at the power plant and the two closest substations is in accordance with the Grid code Electricity System Power System 2007 2.1.b which states the voltage standard on the 150 kV interconnection grid must always be between 135 kV and 165 kV (± 10% nominal voltage). In addition, the stability of the electric power system can be seen from the voltage, frequency and rotor angle parameters. The grid remains stable when there is a disturbance in one of the power plant generators, disturbance in one or two cables between power plant and the nearest substation, and the release of load in one of the substations. Instability occurs when it is isolated with the Sumatra interconnection grid which results in total blackouts. Meanwhile, the addition of generating capacity through PLTP in the 150 kV North Sumatra interconnection system causes the value of short circuit current in substations increase. All short circuit current still meets IEEE Std C37.06-2009 standard."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Marpaung, Fujita Olivia
"Salah satu wilayah di Indonesia yang memiliki potensi panas bumi adalah wilayah “WS”. Secara umum, tolak ukur keberhasilan dalam menentukan target eksplorasi adalah menemukan zona yang memiliki tingkat temperatur dan permeabilitas yang tinggi. Zona dengan temperatur tinggi berasosiasi dengan keberadaan sumber panas, sedangkan zona dengan permeabilitas tinggi berasosiasi dengan keberadaan struktur patahan yang mengandung fluida. Fokus pada penelitian ini adalah untuk mengidentifikasi struktur patahan di wilayah panas bumi “WS” melalui analisis model data gravitasi dan magnetotelurik. Analisis tersebut nantinya dikorelasikan dengan informasi geologi dan geokimia untuk hasil yang lebih komprehensif. Singkatnya, metode gravitasi digunakan untuk meneliti anomali percepatan gravitasi bumi akibat adanya perbedaan rapat massa batuan penyusun bawah permukaan bumi, sedangkan metode magnetotelurik digunakan untuk menginduksi bumi sehingga dapat mengidentifikasi distribusi resistivitas suatu batuan di bawah permukaan bumi. Hasil pemodelan forward 2D data gravitasi menunjukkan adanya tiga kategori densitas batuan, yaitu densitas 2.40 – 2.60 gr/cc yang diduga sebagai sumber panas, densitas 1.84 – 2.53 gr/cc yang diduga sebagai lapisan penudung, dan densitas 1.21 – 2.31 gr/cc yang diduga merupakan reservoir. Hasil pemodelan inversion 3D data magnetotelurik menunjukkan bahwa terdapat lapisan konduktif yang ditandai dengan warna merah dan diduga sebagai lapisan penudung, lapisan dengan nilai resistivitas sedang yang ditandai dengan warna hijau berada di bawah manifestasi panas bumi dan diduga merupakan reservoir, serta lapisan dengan nilai resistivitas tinggi yang ditandai dengan warna biru pada kedalaman 1000 – 3000 meter lebih yang diinterpretasikan sebagai sumber panas. Berdasarkan model gravitasi dan magnetotelurik, didapati bahwa densitas yang dihasilkan model gravitasi telah sesuai dengan komponen penyusun sistem panas bumi wilayah “WS” yang dihasilkan oleh model magnetotelurik. Hal ini terkonfirmasi melalui batuan penyusun lapisan penudung yang memiliki nilai densitas tidak lebih besar dari densitas sumber panasnya, mengingat lapisan penudung telah mengalami alterasi hidrotermal dan didominasi oleh mineral halloysite dan montmorillonite. Sistem panas bumi wilayah “WS” merupakan gabungan sistem panas bumi vulkanik yang dipengaruhi oleh batuan sedimen, dengan perkiraan temperatur reservoir sebesar 200°C. Dengan demikian sistem panas bumi ini termasuk dalam intermediate temperature system.

One of the areas in Indonesia that has geothermal potential is the "WS" area. In general, the measure of success in determining exploration targets is finding zones that have high temperature and permeability levels. Zones with high temperatures are associated with the presence of heat sources, while zones with high permeability are associated with the presence of fluid-containing fault structures. The focus of this research is to identify the fault structure in the "WS" geothermal area through the analysis of gravity and magnetotelluric data models. This analysis will later be correlated with geological and geochemical information for more comprehensive results. In short, the gravity method is used to examine the anomaly of the earth's gravitational acceleration due to differences in the mass density of rocks making up the earth's subsurface, while the magnetotelluric method is used to induce the earth so that it can identify the resistivity distribution of a rock under the earth's surface. The results of the 2D forward gravity data modeling show that there are three rock density categories: a density of 2.40–2.60 gr/cc, which is suspected as a heat source; a density of 1.84–2.53 gr/cc, which is thought to be a cover layer; and a density of 1.21–2.31 gr/cc, which is suspected to be a reservoir. The results of 3D inversion modeling of the magnetotelluric data show that there is a conductive layer marked in red and thought to be a capping layer; a layer with moderate resistivity value marked in green is under geothermal manifestations and thought to be a reservoir; and a layer with high resistivity value marked in blue at a depth of 1000–3000 meters that is interpreted as a source of heat. Based on the gravity and magnetotelluric models, it was found that the density produced by the gravity model was in accordance with the components of the geothermal system in the "WS" region produced by the magnetotelluric model. This is confirmed by the rocks that make up the cover layer, which have a density value not greater than the density of the heat source, considering that the cover layer has undergone hydrothermal alteration and is dominated by the minerals halloysite and montmorillonite. The geothermal system in the "WS" region is a combination of volcanic geothermal systems influenced by sedimentary rocks, with an estimated reservoir temperature of 200°C. Thus, this geothermal system is included in the intermediate temperature system."
Depok: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>