Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 7724 dokumen yang sesuai dengan query
cover
Fantom, A.
London: Peter Peregrinus, 1990
621.381 3 FAN r
Buku Teks  Universitas Indonesia Library
cover
New York: John Wiley & Sons, 2001
R 681.2 SUR
Buku Referensi  Universitas Indonesia Library
cover
Kicthen, Ronald
"Buku yang berjudul "Radio frequency & microwave radiation safety" ini ditulis oleh Ronald Kicthen. Buku ini membahas tentang frekuensi radio dan keamanan radiasi."
Boston: Oxford : Newnes, 2003
R 681.414 8 KIT r
Buku Referensi  Universitas Indonesia Library
cover
Abrie, Pieter L.D.
"Disk contains: Impedance-matching with LSM and RCDM -- Examples for using LSM and RCDM."
Boston: Artech House, 2009
621ABRD001
Multimedia  Universitas Indonesia Library
cover
Alvin Fanthony
"Pengukuran energi listrik menggunakan kWh meter harus memiliki akurasi yang sangat baik, oleh karena itu, tidak ada pihak yang secara finansial dirugikan antara konsumen dan pemasok listrik sebagai akibat dari kesalahan dalam pengukuran energi yang digunakan. Dengan meningkatnya penggunaan beban non-linier oleh konsumen dapat menyebabkan salah satu masalah kualitas daya dalam bentuk harmonik; yang dapat mempengaruhi tingkat akurasi dari hasil pengukuran yang sebenarnya. Di sisi lain, seiring berjalannya waktu, usia kWh meter juga memungkinkan terjadinya kesalahan dalam pembacaan karena kerja komponen kWh yang kurang optimal.
Dari hasil percobaan, pada beban rumah tangga, dapat dibuktikan bahwa semakin tinggi THD% (% THD-I> 15%), deviasi membaca akan semakin besar dengan kesalahan% tertinggi mencapai 4.4% pada analog kWh meter sementara meter digital kWh hanya 1,57%. Dalam pengukuran variasi beban, semakin banyak penggunaan beban non-linear, maka% THD akan meningkat. Dalam percobaan ini, lampu LED menghasilkan% THD-I tertinggi (mencapai 142,36%). Sementara itu variasi beban juga mempengaruhi% THD-I yang dihasilkan yang bergantung pada beban dominan pada daya yang dikonsumsi. Hasil uji beban variabel menunjukkan bahwa analog kWh meter yang tahun konstruksinya relatif panjang (lebih dari 15 tahun) tidak mampu mengukur beban dengan daya kecil (<100W) sehingga akan mempengaruhi tingkat akurasi yang sangat rendah.
Untuk kesalahan membaca persentase dari semua variasi beban, analog kWh meter (2002) mencapai 22,68%, analog kWh meter (2015) adalah 9,36%, dan digital kWh meter adalah 2,09%. Untuk persentase kesalahan membaca pada beban tinggi saja, 2,25% untuk analog kWh meter (2002), 1,15% untuk analog kWh meter (2015), sementara 0,68% untuk meter digital kWh. Dari semua percobaan yang dilakukan, dapat disimpulkan bahwa meter digital kWh memiliki akurasi yang lebih baik daripada analog kWh meter. Juga direkomendasikan untuk mengganti kWH meter analog yang telah dibangun cukup lama dengan tahun konstruksi baru atau dengan meter digital kWh agar tidak merugikan dari sisi pemasok listrik.

Measurement of electrical energy using kWh meter must have a very good of accuracy, therefore, none of any party is financially disadvantaged between the consumer and electricity supplier as a result of errors in the measurement of energy used. With the increasing use of non-linear load by consumers may cause one of the power quality problems in form of harmonics; that may affect the degree of accuracy of the actual measurement results. On the other hand, as the time goes by that the age of old kWh meter also allows to occurrence of errors in the reading due to the less optimal work of the kWh meter components.
From the experiment results, in the household load, it can be proved that the higher the %THD (%THD-I > 15%), the reading deviation will be greater with the highest % error reaching 4.4% on analog kWh meter while the digital kWh meter is only 1.57%. In the measurement of load variation, the more use of non- linear loads, the %THD will increase. In this experiment, the LED lamp produced the highest %THD-I (reaching 142.36%). Meanwhile the load variations also affected the %THD-I produced which depend on the dominant load on the power consumed. Variable load test results show that analog kWh meter whose construction years have been relatively long (more than 15 years) are not able to measure loads with a small power (<100W) so that it will affect the very low level of accuracy.
For the error reading percentage of all load variations, analog kWh meters (2002) reached 22.68%, analog kWh meters (2015) were 9.36%, and digital kWh meter were 2.09%. For error reading percentage at high load only, 2.25% for analog kWh meters (2002), 1.15% for analog kWh meters (2015), while 0.68% for digital kWh meters. From all the experiments carried out, it can be concluded that digital kWh meters have better accuracy than analog kWh meter. It is also recommended that to replace the analog kWH meter which has been construction for quite a long time with the new construction year or with digital kWh meter in order not to detriment from the electricity supplier side.
"
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Galih Arwy Herdiyanto
"ABSTRAK
Dewasa ini telah dilakukan beberapa penelitian bahwa frekuensi antara 2-150 KHz merupakan salah satu fenomena penyimpangan kualitas daya. Menurut penelitian salah satu akibat dari distorsi atau disturbance dari frekuensi 2-150 kHz tersebut yaitu berdampak pada kinerja peralatan rumah tangga yang dimana beberapa diantaranya terjadi malfungsi. Tidak hanya pada peralatan rumah tangga saja, disturbance tersebut juga bisa berdampak pada kWh meter analog maupun digital satu fasa. Pengukuran transaksi energi listrik dengan menggunakan kWh meter selayaknya mempunyai tingkat akurasi yang baik agar tidak ada satupun pihak yang dirugikan akibat adanya kesalahan dalam proses pengukuran. Dalam skripsi ini akan dilakukan pengujian disturbance tersebut terhadap pembacaan di kWh meter analog dan digital satu fasa. Metode yang dilakukan dalam penelitian ini yaitu dengan menggunakan perangkat lunak MATLAB yang akan membangkitkan disturbance frekuensi tersebut sehingga dapat diketahui efeknya terhadap kinerja kWh meter yang diuji. Hasil pengujian menunjukkan bahwa terjadi kesalahan error sebesar ± 5 % dalam perhitungan energi kWh di kWh meter analog baik pada pengukuran normal maupun pengukuran yang diberikan.

ABSTRACT
Disturbance frekuensi. Nowadays some research has been done that the frequency between 2-150 KHz is one of the phenomenon of power quality deviation. According to research, one result of distortion or disturbance of the 2-150 kHz frequency is the impact on the performance of household appliances where some of them became malfunctions. Not only in household appliances, but the disturbance can also affect the function of kWh meter analog or digital single phase. Measurement of electric energy transaction should have a good accuracy so that no party is disadvantaged because of an error measurement. This thesis will be tested the distortion to the readings in single phase of analog and digital kWh meter. The method used in this research is by using MATLAB softwre to generate the frequency disturbance so it can know the effect on the performance of tested kWh meter. The test results show that there is an error of ± 5% in calculating kWh energy in analog kWh meters both in normal measurements and measurements given disturbance frequency."
2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Irfan Kurniawan
"Proses pengukuran energi listrik pada kWh meter menjadi hal yang sangat penting karena menyangkut proses transaksi energi yang bilamana terjadi kesalahan didalamnya maka akan menimbulkan kerugian pada pihak konsumen dan/atau produsen. Penelitian ini bertujuan untuk melihat karakteristik pengukuran oleh kWh meter, baik itu jenis analog maupun digital, yang dipengaruhi oleh harmonisa serta faktor lingkungan berupa naiknya temperatur lingkungan di sekitar kWh meter tersebut dipasang.
Hasil penelitian menunjukkan bahwa semakin besar nilai harmonisa pada beban maka akan semakin merusak bentuk gelombang arus dan tegangan (terdistorsi). Dengan terdistorsinya gelombang tersebut maka proses pengukuran oleh kWh meter akan semakin jauh dari nilai yang sebenarnya digunakan. Kesalahan terbesar dalam pengukuran akibat harmonisa ini bisa mencapai lebih dari 64%. Selain itu, faktor lain berupa naiknya temperatur di sekitar kWh meter akan menyebabkan pengukuran menjadi lebih besar dari yang semestinya dikarenakan adanya kesalahan faktor elekrtis dan mekanis. Dalam penelitian ini, kenaikan rata-rata terbesar pada hasil pengukuran kWh meter yaitu sebesar 7,22% pada kWh analog, beban 1105 Watt dengan THDi = 10% dan 4,26% pada kWh digital, beban 275 Watt dengan THDi = 40%, dalam setiap 10oC kenaikan temperatur.

The process of measuring electrical energy in electricity meter becomes very important because it involves the energy transaction process and when an error occurs in it then it will cause harm to the consumer and / or producer. This study aims to look at characteristic of measurements by kWh meters, both analogue and digital types, which are influenced by environmental factors such as harmonic as well as rising of environmental temperatures around the kWh meter that installed.
The results showed that the greater the value of the harmonics on the load it will be more damaging current and voltage waveform (distorted). With the wave distorted by the kWh meter measurement process will be far from the actual values used. The biggest mistake in the measurement due to these harmonics can reach more than 64%. In addition, other factors such as rising temperatures will cause the kWh meter measurements become larger than necessary due to the rising value of resistance (R). In this study, the greatest average increase in the measurement results kWh meter is equal to 7,22% for analogue with load 1105 Watts, THDi 10%; and 4,26% for digital with load 275 Watts, THDi 40%; for each 10°C increase in temperature."
Depok: Fakultas Teknik Universitas Indonesia, 2013
T36136
UI - Tesis Membership  Universitas Indonesia Library
cover
Simanjuntak, Daniel
"Radio-Frequency Identification (RFID) telah menjadi salah satu segmen teknologi yang memiliki pertumbuhan pesat pada industri pengumpulan data dan identifikasi otomatis. Salah satu bagian terpenting dari sistem RFID adalah power amplifier yang memungkinkan terjadinya transfer daya antara reader dengan transponder untuk melakukan identifikasi.
Pada penelitian ini diusulkan power amplifier kelas E untuk aplikasi RFID yang bekerja pada frekuensi 13.56 MHz. Power amplifier pertama kali disimulasikan dengan menggunakan software Advance Desain System (ADS) dan kemudian hasil simulasi difabrikasi.
Power amplifier kelas E yang dirancang memiliki kestabilan K sebesar 1.758, return loss masukan (S11) sebesar -23.587 dB, return loss keluaran (S22) sebesar -19.123 dB, gain (S21) sebesar 22.742 dB, VSWR sebesar 1.142, dan PAE maksimal 79.331% pada frekuensi 13.56 MHz.
Sedangkan power amplifier hasil fabrikasi memiliki performansi yang cukup berbeda dengan hasil simulasi dimana hasil fabrikasi memiliki return loss masukan (S11) sebesar -14.926 dB, return loss keluaran (S22) sebesar -12.812 dB, dan gain (S21) sebesar 0.852 pada frekuensi 13.56 MHz.

Radio-Frequency Identification (RFID) has become a technology segment that growth rapidly in data collecting industry and automatic identification. One of the most important part of RFID system is power amplifier that enable power transfer between reader and transponder for identification purpose.
This research propose power amplifier class E for RFID application at 13.56 MHz frequency’s. The power amplifier is simulated with Advanced Design System (ADS) software then the simulation design is fabricated.
The simulation result of class E power amplifier has stability factor K of 1.758, input return loss (S11) of -23.587 dB, output return loss (S22) of -19.123 dB, gain (S21) of 22.472 dB, VSWR of 1.142, and maximum PAE of 79.331% on frequency of 13.56 MHz.
The fabrication result of power amplifier has a difference performance to the simulation result where the fabrication result has input return loss (S11) of -14.926 dB, output return loss (S22) of -14.926 dB, gain (S21) of 0.852 dB on frequency of 13.56 MHz.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
T35521
UI - Tesis Membership  Universitas Indonesia Library
cover
Carr, Joseph J.
Boston: Newnes, 2002
R 621.384 CAR p
Buku Referensi  Universitas Indonesia Library
cover
Carr, Joseph J.
Amsterdam: Newnes, 2002
621.384 CAR p
Buku Teks  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>