Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 96068 dokumen yang sesuai dengan query
cover
Rizky Alfiansyah
"Dalam tubuh manusia, bahan implan tidak hanya berinteraksi dengan ion anorganik, tetapi juga berinteraksi dengan senyawa organik, terutama protein. Variasi konsentrasi 0 g/L – 0,4 g/L Bovine Serum Albumin (BSA) sebagai protein yang disimulasikan ditambahkan pada larutan Phosphate Buffered Saline (PBS) untuk mengamati perilaku korosi niobium (Nb) melalui pengujian elektrokimia dan karakterisasi permukaan. Berdasarkan analisis kurva polarisasi potensiodinamik, didapatkan nilai potensial korosi yaitu -0,84 V; -0,86 V; -0,87 V; -0,87 V dan rapat arus korosi 4,4 μA cm-2; 2,9 μA cm-2; 1,9 μA cm-2; 1,9 μA cm-2. Nilai potensial dan rapat arus korosi menurun seiring penambahan konsentrasi BSA, menyebabkan laju korosi yang menurun juga. Analisis hasil karakterisasi XRD menunjukkan bahwa fasa oksida dari Nb tidak muncul, karena lapisan oksida yang terbentuk sangat tipis. Pengamatan morfologi permukaan menggunakan Scanning Electron Microscope (SEM) juga didapatkan jumlah kerusakan akibat serangan korosi semakin berkurang seiring penambahan konsentrasi BSA.

In the human body, the material of the implant is not only interact with the inorganic ions, but also interact with organic compounds, especially proteins. Variation of the concentration of 0 g/L to 0.4 g/L Bovine Serum Albumin (BSA) as a protein that is simulated is added in a solution of Phosphate Buffered Saline (PBS) to observe the corrosion behavior of niobium (Nb), through testing and electrochemical characterization of the surface. Based on the analysis of the curves of potentiodynamic polarization, obtained the value of the corrosion potential that is -0.84 V; -0.86 V; -0.87 V; -0.87 V and current density of corrosion of 4.4 µA cm-2; a 2.9 µA cm-2; the 1.9 µA cm-2; A 1.9 µA cm-2. The value of the potential and current density of corrosion decreases as the addition of the concentration of BSA, causing the corrosion rate decreased as well. Analysis of the results of XRD characterization shows that the phase of the oxide of Nb does not appear, because the oxide layer formed is very thin. The observation of surface morphology using Scanning Electron Microscope (SEM) also showed the amount of damage due to corrosion attack on the wane as the addition of the concentration of BSA."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Taufik Akbar
"Latar Belakang: Penatalaksanaan defek tulang dengan terapi regeneratif seperti penggunaan sekretom berpotensi mengatasi kekurangan, seperti morbiditas donor, dari pencangkokan tulang autologus. Namun hingga saat ini belum ada penelitian yang meneliti perbedaan kemampuan pertumbuhan tulang dari sekretom asal sel punca tali pusat, jaringan lemak, dan sumsum tulang.
Metode: Penelitian ini adalah penelitian eksperimental hewan menggunakan 63 tikus, dibagi menjadi 5 kelompok besar, yaitu kelompok sekretom sel punca mesenkimal (SPM) asal tali pusat, jaringan lemak, sumsum tulang, kontrol tanpa tindakan, dan kontrol dengan hidroksiapatit. Setiap tikus dioperasi sesuai dengan tindakannya, kelompok perlakuan diberi perlakuan sekretom yang sesuai dan hidroksiapatit dan kemudian kalus yang terbentuk diperiksa 2 minggu kemudian. Pemeriksaan luaran menggunakan histopatologi, berupa histomorfometri (area penulangan, fibrosis dan kartilago) dan pulasan immunohistokimia Bone Morphonegetic Protein (BMP)-2, dan pemeriksaan Enzyme Linked Immunoabsorbent Assay (ELISA) protein Indian Hedgehog (Ihh).
Hasil: Kelompok yang mendapatkan sekretom asal SPM jaringan lemak memiliki area penulangan terbanyak, sedangkan kedua kelompok kontrol terendah (p<0,001), kelompok sekretom asal SPM sumsum tulang memiliki area kartilago terbanyak (p=0,134), dan kedua kelompok kontrol memiliki area fibrosa terbanyak (p=0,198). Skor BMP-2 tertinggi tampak pada kelompok sekretom asal SPM adiposa dan paling rendah pada kelompok kontrol (p<0.001). Kadar protein Ihh secara bermakna paling tinggi pada kelompok sekretom asal SPM sumsum tulang, dan paling rendah pada kelompok kontrol (p<0.001)
Kesimpulan: Sekretom memiliki kemampuan osteogenitas, dengan sekretom asal SPM jaringan adiposa yang memiliki kemampuan penulangan tertinggi pada tikus dengan defek tulang kritis, dibandingkan dengan kelompok sekretom lainnya dan kelompok yang tanpa diberikan tindakan

Introduction: The management of bone defects with regenerative therapy using a secretome, for example, is promising and potentially may outweigh the shortcoming of autologous bone graft therapy such as donor morbidity. However, not many studies have compared the differences in the capabilities of bone growth from secretome derived from umbilical cord, adipose and bone marrow stem cell.
Methods: This research is an experimental animal study using 63 rats. A total of 63 rats were divided into 5 major groups (umbilical cord, adipose, bone marrow stem cell secretomes, control without treatment, and control with hydroxyapatite). Each mice was treated accordingly and the harvesting was done after 2 weeks. All samples were examined histopathologically using histomorphometry (ossification, fibrosis, and cartilage area) and Bone Morphogenetic Protein (BMP)-2 immunohistochemistry staining and Enzyme Linked Immunoabsorbent Assay (ELISA) Indian Hedgehog (Ihh) protein
Results: The percentage of ossification area was significantly highest in the adipose stem cell secretome group, and the lowest in both control group (p<0.001). The highest percentage of cartilage area was seen in the bone marrow stem cell secretome group (p=0.134) and the highest percentage of fibrous area was seen in both control group (p=0.198). The highest BMP-2 score was seen in the adipose stem cell secretome group and the lowest was in the control group (p<0.001). Level of Ihh protein was significantly highest in the bone marrow stem cell group group and lowest in the control group (p<0.001)
Conclusion: Secretome had osteogenic inducing ability, with adipose stem cell-derived secretomes having the highest bone density in mice with critical bone defects, compared to the other secretome groups and the control group.
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2021
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Muhamad Mushabhanif Ghazy
"Magnesium merupakan jenis logam dengan biokompatibilias yang sangat baik dan sifat mekanik yang paling mendekati tulang manusia sehingga cocok untuk digunakan sebagai material implan tulang mampu luruh. Akan tetapi, magnesium memiliki dua permasalahan utama dimana kemampubentukan yang terbatas karena struktur kristal HCP dan ketahanan korosi yang kurang baik. Beberapa metode yang dapat dilakukan untuk mengatasi permasalahan ini adalah dengan penambahan unsur paduan atau dengan diberikan perlakuan termomekanik. Pada penelitian ini, logam magnesium akan diberikan unsur paduan litium (Li) sebanyak 14%wt (persen berat) dan alumunium (Al) sebanyak 1%wt (persen berat). Selain penambahan unsur paduan, paduan magnesium akan diberikan perlakuan termomekanik dimana pada penelitian ini metode yang digunakan adalah pencanaian dingin (cold rolling) dan annealing. Proses cold rolling akan dilakukan dengan tiga variasi persen reduksi sebesar 30%, 60% dan 90% dimana proses annealing dilakukan pada temperatur 300oC dengan waktu tahan satu jam dan laju pemanasan sebesar 5oC/menit. Hasil dari penelitian ini menunjukan bahwa penambahan dari unsur paduan litium (Li) dan alumunium (Al) dapat meningkatkan keuletan dari paduan LA141 karena dihasilkan fasa β-Li dan θ-MgAlLi2. Proses perlakuan panas yang dilakukan dapat menghasilkan fenomena rekristalisasi sehingga dihasilkan mikrostruktur dengan ukuran butir yang lebih seragam. Selain itu, sampel dengan 90% reduksi menghasilkan nilai kekerasan yang tertinggi dengan nilai 76,81 HV untuk sampel non-HT dan 83,58 HV setelah dilakukan perlakuan panas (HT). Berdasarkan hasil penelitian ini maka metode penguatan yang terjadi pada paduan LA141 adalah penguatan dengan bantuan presipitat dan penguatan batas butir.

Magnesium is a metal with impressive biocompatibility and mechanical properties that are closest to the human bone, making it suitable to be used as a material for biodegradable implants. However, magnesium has two major problems limited formability due to the HCP crystal structure and poor corrosion resistance. Several methods can be used to solve this problem, including adding alloying elements or providing thermomechanical treatment. This research will use 14 wt% lithium (Li) alloy and 1 wt% aluminum (Al) alloy as alloying elements in magnesium metal. Aside from the addition of alloying elements, thermomechanical treatment can help increase the mechanical properties of magnesium alloy. In this research, the methods used are cold rolling and annealing. The cold rolling process will be carried out with three variations of percent reduction as 30%, 60%, and 90% where the annealing process is carried out at 300oC with a one-hour holding time and the heating rate is 5oC/minute. The results of this research indicate that the addition of lithium (Li) and aluminum (Al) alloy elements can increase the ductility of the LA141 alloy because it produces β-Li and θ-MgAlLi2 phases. The heat treatment process can produce a recrystallization phenomenon, resulting in a more uniform grain size (fine grain) microstructure. In addition, samples with 90% reduction produced the highest hardness values, with 76.81 HV for non-HT samples and 83.58 HV after heat treatment. Based on the results of this research, the strengthening methods that occur for LA141 are solid solution strengthening and grain boundary strengthening."
Depok: Fakultas Teknik Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Marthan Lassandy
"ABSTRAK
Manufaktur adalah suatu kegiatan pengolahan bahan baku menjadi produk setengah jadi atau produk jadi. Selain proses manufaktur di dalam perindustrian adalah perancangan produk, seleksi material, distribusi material yang dibutuhkan untuk menciptakan suatu produk. Suatu produk yang dihasilkan dari suatu sistem manufaktur, mempunyai suatu indeks kompleksitas produk yang menggambarkan bahwa produk tersebut dibuat dengan tingkat kompleksitas tertentu. Metode terpilih dalam aplikasi implant miniplate adalah metode kuantitatif dengan gabungan pendekatan analitis, karena dianggap sesuai dan didasarkan pada rincian analisis desain produk, fiturnya, yang disesuaikan dengan proses manufaktur pada kasus terkait, bukan hanya mengandalkan data masa lalu atau pengetahuan tentang seorang estimator. Implant miniplate tergolong baru dan merupakan produk yang pertama dibuat maka metode kualitatif tidak sesuai dengan aplikasi yang dipilih. Indeks kompleksitas proses dari proses manufaktur implant miniplate adalah 101,9 Estimasi biaya proses dari proses manufaktur implant miniplate dengan menggunakan gabungan teknik analitis adalah Rp 139.150,9 Indeks kompleksitas proses dan biaya dari proses manufaktur implant miniplate pada tahap awal desain dapat dilakukan dengan bantuan software Siemens Nx 8 sebagai panduan penentuan waktu dengan parameter yang sama.

ABSTRACT
Manufacturing is an activity of processing raw materials into semi finished or finished products. In addition to manufacturing processes within the industry are product design, material selection, material distribution needed to create a product. A product produced from a manufacturing system, has an index of product complexity that illustrates that the product is made with a certain degree of complexity. The preferred method in miniplate implant application is a quantitative method with a combined analytical approach, as it is considered appropriate and based on the details of the product design analysis, its features, tailored to the manufacturing process in the related case, rather than relying only on past data or the knowledge of an estimator. Miniplate implants are new and are the first product created then the qualitative method does not match the selected application. The process complexity index of the miniplate implant manufacturing process is 101.9 The estimated process cost of the miniplate implant manufacturing process using a combined analytical technique is Rp 139.150.9 The process and process complexity index of the miniplate implant manufacturing process in the early stages of the design can be done with the help of Siemens software Nx 8 as a timing guide with the same parameters. "
Depok: Fakultas Teknik Universitas Indonesia, 2018
T50638
UI - Tesis Membership  Universitas Indonesia Library
cover
Narottama Tunjung Hariwangsa
"Reduksi secara tertutup dan fiksasi internal menggunakan miniplate dan screw titanium masih merupakan modalitas terapi yang terbaik untuk fraktur tulang wajah yang displaced dengan gangguan fungsi dan deformitas secara penampilan. Namun, implan maksilofasial yang beredar di Indonesia masih sangat mahal. Untuk itu diperkenalkan miniplate dan screw buatan lokal (UniFIX®) yang lebih murah dan memiliki kualitas yang sama dengan miniplate dan screw yang diimpor. Dilakukan studi eksperimental cross over dengan menggunakan enam belas model tengkorak dari bahan polyurethane yang dipasang implan UniFIX® dan implan impor pada bagian rima orbita inferior oleh pengguna. Dilakukan pencatatan terhadap waktu untuk menyelesaikan pemasangan miniplate dan screw. Setiap pengguna diberikan kuesioner evaluasi terhadap kemudahan penggunaan miniplate dan screw dalam hal kenyamanan saat penggunaan, kecocokan screw dengan screwdriver, pembengkokan plate, dan self-tapping dari screw. Setelah itu, dilakukan penilaian oleh konsultan ahli kraniofasial terhadap stabilitas dan adaptabilitas dari miniplate dan screw yang telah dipasang. Hasil penelitian menunjukkan bahwa miniplate dan screw UniFIX® tidak inferior jika dibandingkan dengan miniplate dan screw impor dalam hal kemudahan penggunaan. Meskipun demikian, karakteristik self-tapping screw UniFIX® dapat ditingkatkan untuk mendapatkan kualitas yang lebih baik.

Open reduction and internal fixation using miniplate and screw is still the best treatment of displaced facial fracture with functional impairment and cosmetic deformity. However, imported miniplate and screw currently widely used are highly costly. Therefore, a locally-made miniplate and screw (UniFIX®) which is cost-efficient and has the same quality with the imported brand is introduced. This study aims to evaluate the usability of UniFIX® miniplate and screw in comparison with the imported miniplate and screw. Cross over experimental study was conducted with sixteen polyurethane anatomical skull models. Both UniFIX® and imported miniplate and screw were placed on the infraorbital rims by users. Time to complete the placement was recorded. Each user received questionnaire to evaluate the usability of miniplate and screw in terms of operator s comfort, screw fit to screwdriver, plate bending, and self-tapping of the screw. Subsequently, two craniofacial consultants were given scoring sheet to evaluate the stability and the adaptability of each miniplate and screw. The results showed that the usability of UniFIX® miniplate and screw was not inferior compared to the imported brand. Nevertheless, the self-tapping feature of locally-made screw may be improved to produce better quality."
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2019
T57601
UI - Tesis Membership  Universitas Indonesia Library
cover
I Putu Wahyu Diasmika
"Tulang tengkorak berfungsi untuk membentuk struktur kepala dan melindungi organ-organ penting di dalamnya. Keretakan tulang tengkorak dapat menyebabkan berbagai gangguan kesehatan, mental, dan bahkan kematian. Polilaktida (PLA) telah menjadi salah satu bahan implan yang paling banyak digunakan untuk keretakan tulang tengkorak. Hal ini dikarenakan PLA memiliki sifat toksisitas yang rendah, biokompatibilitas, dan biodegradabilitas, serta sifat mekanis yang baik. Salah satu turunan dari PLA adalah PLLA (poli(L-laktida)) dengan struktur semi-kristalin yang digunakan pada penelitian ini. PLLA tersebut perlu dilakukan alterasi supaya sifat mekanis dan sifat degradasi sesuai dengan aplikasi pelat fiksasi patah tulang kraniomaksilofasial. Bahan yang ditambahkan dalam matriks PLLA merupakan agar-agar dengan struktur amorf. Penelitian ini bertujuan untuk memperoleh komposisi campuran yang optimal dari variasi campuran agar-agar, yaitu 4%, 8%, dan 12%. Pencampuran menggunakan metode melt-blending yaitu mencampurkan dan mengaduk bahan dalam kondisi lelehan. Sampel dicetak dengan dimensi 80×10×4 mm sesuai standar ISO 178 untuk pengujian kekuatan tekuk polimer. Sampel dilakukan karakterisasi FTIR, TGA, DSC, three-point bending UTM. Hasil karakteriasi dengan FTIR menunjukan terdapat gugus C=O, C-H simetris dan asimetris, C-O, C-COO, serta pergeseran nomor gelombang karena pengaruh suhu yang lebih tinggi. Selain itu, karakteriasi termal TGA menunjukan bahwa campuran dengan konsentrasi agar-agar yang lebih tinggi menunjukkan degradasi yang lebih besar pada suhu campuran 180°C. Suhu yang lebih tinggi juga mempercepat degradasi agar-agar dalam campuran. Hasil DSC menunjukan bahwa semakin tinggi penambahan agar-agar dalam matriks PLLA, maka titik leleh dan %Xc dari PLLA akan semakin menurun. Hal tersebut juga berdampak dengan hasil pengujian sifat mekanis, di mana kekuatan tekuk semakin menurun seiring bertambahnya agar-agar. Nilai dari kekuatan tekuk dan regangan cenderung terus menurun dari 0,87 hingga 0,35 MPa seiring dengan bertambahnya kadar agar-agar dalam matriks PLLA baik untuk T1 (160oC) maupun T2 (180oC).

The skull functions to form the structure of the head and protect the vital organs within it. Skull fractures can cause various health issues, mental disturbances, and even death. Polylactide (PLA) has become one of the most widely used implant materials for skull fractures due to its biocompatibility, biodegradability, low immunogenicity and toxicity, and good mechanical properties. The main material used is poly(L-lactide) (PLLA) with a semi-crystalline structure. The PLLA needs to be altered to achieve the appropriate mechanical and degradation properties for craniomaxillofacial fracture fixation plates. Agar-agar with an amorphous structure is added to the PLLA matrix. This study aims to obtain the optimal composition from the variations of agar-agar mixtures, namely 4%, 8%, and 12%. The mixing is done using the melt-blending method, which involves mixing and stirring the materials in a molten state. Samples are molded to dimensions of 80×10×4 mm according to ISO 178 standards for polymer bending strength testing. The samples are characterized using FTIR, TGA, DSC, and three-point bending UTM. The FTIR characterization results show the presence of C=O, symmetric and asymmetric C-H, C-O, C-COO groups, and shifts in wave numbers due to the influence of higher temperatures. Additionally, the TGA thermal characterization shows that mixtures with higher agar-agar concentrations exhibit greater degradation at a mixing temperature of 180°C. Higher temperatures also accelerate the degradation of agar-agar in the mixture. DSC tests indicate that the higher the addition of agar-agar in the PLLA matrix, the more the melting point and %Xc of PLLA decrease. This also impacts the mechanical properties test results, where the bending strength decreases with increasing agar-agar content. In the mechanical properties test, the values of bending strength and strain tend to continuously decrease with increasing agar-agar content in the PLLA matrix for both T1 (160oC) and T2 (180oC)."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Stanislaus Ivanovich Krishnanda
"ABSTRACT
Stem cell therapy has been implemented in Cipto Mangunkusumo General Hospital RSCM, Jakarta. However, technical problems necessitate one to store the already prepared stem cells in a solution which best preserves them, without hampering their viability and functions PDT, until the operation is ready. Thus, this experiment explored the effect of phosphate buffered saline PBS, as a storage medium, on human umbilical cord-derived mesenchymal stem cells hUCMSCs viability and PDT over 168 hours. The experiment used passage 9 hUC MSCs that are placed into 8 groups 0, 3, 6, 24, 48, 72, 96 and 168 hours with 4 observations each. After the time of interest elapsed, a sample of the cells were taken to determine their viability and its average value, while the others were seeded at 10,000 cells in a multi-well plate. When the seeded cells reached 70-80% confluence, they were harvested and their PDTs, as well as the average value, were checked using a formula. All the obtained data failed to meet the assumption of normal distribution and/or homogenous spread when Shapiro-Wilks test and Levenes test were used respectively. Thus, Kruskal Wallis test was used. When the time of interests were compared to 0-hour time point, viability starting at 6 hours and PDT starting at 3 hours already showed significant difference P0.05. By considering the FDA recommendation for stem cell therapy and statistical significance for both viability and PDT, it is concluded that hUCMSCs can only be stored for less than 3 hours in PBS for optimal transplantation. Nevertheless, this clinical recommendation is an oversimplification since other potency criteria of stem cells should be assessed for a successful therapeutic transplantation.

ABSTRACT
Terapi sel punca sudah diimplementasikan di Rumah Sakit Cipto Mangunkusumo (RSCM), Jakarta. Namun, kendala teknis mendesak kita untuk menyediakan satu medium penyimpanan bagi sel punca yang sudah siap guna. Penyimpanan ini bersifat sementara dan tidak boleh membuat kualitas sel punca rusak. Oleh sebab itu, penelitian ini berupaya untuk menyelidiki kualitas sel punca mesenkimal yang diperoleh dari tali pusar (hUCMSCs)viabilitas dan kemampuan berproliferasi PDTketika ia disimpan di dalam phosphate buffered saline PBS selama 168 jam. Penelitian ini menggunakan hUCMSCs passage 9 yang dibagi menjadi 8 kelompok 0, 3, 6, 24, 48, 72, 96 dan 168 jam dengan masing-masing 4 observasi. Setelah waktu yang ditentukan lewat, sampel dari sel punca diambil untuk menentukan viabilitas, serta didapatkan nilai rata-ratanya. Juga, 10,000 sel ditanam pada multi-well plate dan mereka dipanen pada saat mereka mencapai konfluensi 70-80% untuk mendapatkan PDT, serta nilai rata-ratanya. Hitungan yang didapat dari viabilitas dan PDT kemudian diperiksa menggunakan uji Shapiro-Wilk dan uji Levene, tetapi mereka gagal memenuhi kondisi distribusi normal dan persebaran data yang homogen. Oleh sebab itu, uji Kruskal-Wallis dipakai dan, ketika hasilnya dibandingkan dengan waktu 0 jam, viabilitas sel pada 6 jam dan PDT sel pada 3 jam sudah menunjukkan perbedaan yang signifikan P0.05. Dengan mempertimbangkan rekomendasi FDA tentang terapi sel punca dan signifikansi statistik untuk viabilitas dan PDT, dapat disimpulkan bahwa hUCMSCs hanya dapat disimpan di dalam PBS kurang dari 3 jam untuk transplantasi yang optimal. Namun, rekomendasi klinis ini merupakan sebuah penyederhanaan karena kriteria potensi dari sel punca yang lain juga perlu dinilai untuk sebuah terapi yang sukses"
2017
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siahaan, Gebri Connidio
"Untuk mengatasi kehilangan gigi diperlukan implan gigi yang tahan terhadap korosi. Penelitian ini bertujuan untuk mengetahui morfologi lapisan dan ketahanan korosi Hidroksiapatit (HAp)/Multi Walled Carbon Nanotube (MWCNT) pada substrat Stainless Steel (SS) 316L sebagai implan gigi. Metode yang digunakan untuk melapisi SS 316L dengan HAp/MWCNT adalah metode Electrophoretic Deposition (EPD). Tegangan EPD dilakukan pada 20, 30, dan 40 V selama 20 menit dengan pelarut aseton. Morfologi lapisan HAp/MWCNT dianalisis dengan Scanning Electron Microscope (SEM). Hasil SEM menunjukkan tegangan 20 dan 30 V memiliki morfologi lapisan yang homogen sedangkan tegangan 40 V mengalami terjadinya aglomerasi. Uji korosi dengan metode Potentiodynamic Polarization (PDP) dan Electrochemical Impedance Spectroscopy (EIS) menunjukkan pelapisan HAp/MWCNT melindungi substrat SS 316L dari korosi dalam larutan Simulated Body Fluid (SBF). Sampel dengan kualitas terbaik diperoleh pada tegangan 30 V karena memiliki morfologi lapisan yang homogen sehingga menghasilkan laju korosi yang rendah (0,0745 mpy).

To address tooth loss, corrosion-resistant dental implants are required. This research aims to investigate the morphology and corrosion resistance of Hydroxyapatite (HAp)/ Multi Walled Carbon Nanotube (MWCNT) coatings on Stainless Steel (SS) 316L substrates for dental implants. The electrophoretic deposition (EPD) method was employed to coat SS 316L with HAp/MWCNT. EPD was carried out at 20, 30, and 40 V for 20 minutes using acetone as the solvent. The morphology of the HAp/MWCNT coatings was analyzed using Scanning Electron Microscopy (SEM). SEM results revealed that coatings at 20 and 30 V exhibited a homogeneous morphology, while agglomeration occurred at 40 V. Corrosion tests, conducted using Potentiodynamic Polarization (PDP) and Electrochemical Impedance Spectroscopy (EIS) methods in Simulated Body Fluid (SBF) solution, demonstrated that the HAp/MWCNT coatings protected the SS 316L substrate from corrosion. Samples coated at 30 V exhibited the highest quality due to their homogeneous morphology and low corrosion rate (0.0745 mpy)."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Kamelia Rinati
"Penambahan dopan logam Cu dilakukan dalam modifikasi permukaan permukaan Ti6Al4V, untuk merancang fotokatalitik sistem dengan efisiensi tinggi di bawah cahaya tampak. Mendopankan logam Cu pada permukaan fotokatalis menggunakan metode photo-assisted deposition. Variasi konsentrasi logam Cu (0,05 M; 0,10 M; 0,15 M) dilakukan untuk memperoleh kondisi optimum fotokatalis yang aktif dibawah cahaya tampak. Hasil karakterisasi SEM-EDX dan XRD, menunjukkan bahwa sampel yang dianodisasi dengan elektrolit gliserol memiliki morfologi dan kristalinitas lebih baik dibandingkan sampel yang dianodisasi dengan elektrolit asam. Hasil uji pembentukan biofilm secara in vitro dengan bakteri Streptococcus mutans menunjukkan sampel yang didopankan dengan dopan Cu berkonsentrasi 0,15 M memiliki kinerja fotokatalitik yang paling baik, dengan hasil sebesar 99% persentase disinfeksi bakteri dibandingkan dengan model kontrol pada jam ke-16 pengukuran. Hasil ini menunjukkan sampel yang didopankan dengan dopan Cu berkonsentrasi 0,15 M merupakan kondisi optimum untuk menghambat pembentukan biofilm dalam penelitian ini

Optimization of morphology and crystallinity of TiO2 nanotubes (TNT) fabricated on the surface of Ti6Al4V with anodizing method using a variation of the type of electrolyte. To design a system with high efficiency photocatalytic under visible light, the addition of a transition metal dopant antibacterial namely Cu (Copper). Cu-doped surface on the dental implat using photo-assisted deposition method. Variations in the concentration of Cu (0.05 M; 0.10 M; 0.15 M) were performed to obtain the optimum conditions photocatalysts active under visible light. Results of SEM-EDX and XRD characterization, indicate that the sample which is anodized with glycerol electrolyte, have better morphology and crystallinity than the sample which is anodized with acid electrolyte. The test results of in vitro biofilm formation test by Streptococcus mutans showed sample of which doped with Cu that have concentration of 0,15 M has the best photocatalytic performance, with percentage of disinfection of bacteria at 99% compared with the control model at 16th hour measurement. These results show the samples TNT/G/0,15 which doped with Cu dopant concentration of 0,15 M is an optimum condition to inhibit biofilm formation in the study"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S64638
UI - Skripsi Membership  Universitas Indonesia Library
cover
Lieando Chandra
"Latar belakang: Gigi tiruan dukungan implan, salah satu perawatan kehilangan gigi terbaik, diterima luas di seluruh dunia. Namun, penggunaannya di Indonesia masih relatif rendah. Studi terkait kesadaran (awareness), pengetahuan (knowledge), dan sikap (attitude) terhadap implan gigi telah banyak dilakukan di negara lain, tetapi belum pernah dilakukan di Indonesia. Tujuan: Mengembangkan kuesioner kesadaran, pengetahuan, dan sikap pasien terhadap implan gigi yang valid dan reliabel. Metode: Penelitian kualitatif melalui studi literatur pada 9 studi, wawancara semi-struktur 8 pakar implan dan 10 subjek kehilangan gigi, focus group discussion, dan uji-coba kuesioner. Penelitian kuantitatif pada 227 subjek untuk pengujian validitas dan reliabilitas kuesioner. Hasil: Kuesioner final 28 item (domain kesadaran, pengetahuan, dan sikap) berhasil dikembangkan dengan validitas isi (content validity) dan validitas muka (face validity) terpenuhi. Analisis faktor dapat dilakukan pada ketiga domain berdasarkan hasil Uji Kaiser-Meyer Olkin (KMO) dan Uji Bartlett (0,680;P<0,05| 0,922;P<0,05| 0,849;P<0,05). Uji validitas konvergen dan uji konsistensi internal Cronbach’s alpha menghasilkan nilai baik pada domain kesadaran (r=0,736; P<0,05; α=0,848), domain pengetahuan (r=0,616; P<0,05; α=0,922), dan domain sikap (r=0,658; P<0,05; α=0,794). Kesimpulan: Kuesioner kesadaran, pengetahuan, dan sikap pasien terhadap perawatan dengan implan gigi teruji valid dan reliabel untuk mengevaluasi kesadaran, pengetahuan, dan sikap pasien terhadap perawatan dengan implan gigi di Indonesia.

Background: Implant-supported prosthesis, one of the best treatment for tooth loss, are widely accepted worldwide. However, its utilization is still relatively low in Indonesia. Studies related to awareness, knowledge, and attitude towards dental implants have been conducted in many other countries, but there has been no study in Indonesia. Objective: To develop a valid and reliable questionnaire on patient awareness, knowledge and attitudes towards dental implants. Methods: Qualitative study was done through literature review on 9 studies, semi-structured interviews with 8 implant experts and 10 tooth loss subjects, focus group discussion, and pre-testing. Quantitative study on 227 subjects for validity and reliability test. Results: The final questionnaire of 28 items (awareness, knowledge, and attitude domains) was successfully developed with achieved content validity and face validity. Factor analysis can be performed on all three domains based on the results of the Kaiser-Meyer-Olkin Test (KMO) and Bartlett Test (0.680;P<0.05| 0.922;P<0.05| 0.849;P<0.05). The convergent validity and Cronbach's alpha internal consistency were high in awareness domain (r=0.736; P<0.05; α=0.848), knowledge domain (r=0.616; P<0.05; α=0.922), and attitude domain (r=0.658; P<0.05; α=0.794). Conclusion: The questionnaire developed was valid and reliable to evaluate patient awareness, knowledge, and attitudes towards dental implant treatment in Indonesia."
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>