Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 121509 dokumen yang sesuai dengan query
cover
Annisa Barkah
"

Gunung Tangkuban Parahu yang terletak di sebelah utara Bandung, Jawa Barat mulai dieksplorasi sebagai daerah prospek geothermal sejak awal tahun 1980. Pemboran eksplorasi juga pernah dilakukan hingga kedalaman 620m dengan temperature 50-60oC. Walaupun demikian, hingga saat ini belum ada kemajuan ke tahap pengembangan. Untuk itu, dibutuhkan pemahaman sistem geotermal pada lapangan ini secara rinci dan terintegrasi.

Salah satu aspek penting dalam sistem geotermal adalah zona permeabel yang erat kaitannya dengan keberadaan struktur geologi. Oleh karena itu, penelitian ini dilakukan untuk memetakan keberadaan struktur geologi, estimasi temperature, zona permeabel, zona prospek geotermal serta lokasi optimal untuk pemboran. Namun begitu, penelitian ini lebih menekankan pada zona permeabel.

Untuk mendapatkan informasi terkait hal tersebut, maka digunakan metodologi analisis remote sensing dan gravity. Teknik pencahayaan pada citra DEMNAS diaplikasikan pada penelitian ini dengan menggunakan delapan sudut pencahayaan yang berbeda. Teknik ini mampu merepresentasikan zona high fracture, dan struktur geologi major pada skala besar. Zona high fracture yang menindikasikan zona permeable dominan terbentuk di sekitar patahan major. Penggabungan data DEMNAS dan composite band 432 dan 567 pada Landsat 8 menghasilkan deliniasi litologi pada daerah ini. Lebih lanjut, teknik turunan pada data gravity yaitu First Horizontal Derivative (FHD) dan Second Vertical Derivative (SVD) memberikan informasi strutkur geologi major seperti Sesar Lembang, Sesar Haruman, dan Sesar Ciater di permukaan menerus hingga ke bawah permukaan, adapun beberapa struktur geologi yang tidak nampak di permukaan.

Analisis struktur geologi yang diintegrasikan dengan data MT dan analisis geokimia air menghasilkan model konseptual sistem geotermal di daerah ini. Berdasarkan model konseptual yang dibuat, zona upflow berada di area manifestasi DMS dan CTR, sedangkan zona outflow berada di Utara dan Selatan gunung Tangkuban Parahu. Berdasarkan model MT, zona reservoir berada tepat di bawah puncak gunung Tangkuban Parahu diindikasikan dengan keberadaan dome. Area tersebut memiliki temperature berkisar 240-250oC pada kedalaman BOC -500m di bawah permukaan. Heat source diperkirakan berasal dari sisa intrusi magma. Area optimal untuk pengeboran dari hasil penelitian ini berada pada area sekitar manifestasi DMS dan CTR. Dengan catatan area pemboran ini mempertimbangkan area volcanic hazard (erupsi hidrotermal).


Tangkuban Parahu, located north of Bandung, West Java, has been explored as a geothermal prospect area since the early 1980s. Exploration drilling has also been carried out to a depth of 620m with a temperature of 50-60oC. However, to this day there has been no progress to the development stage. Therefore, understanding detailed and integrated geological conditions are needed.

One of the important aspects of geothermal system is the permeable zone, which is closely related to the existence of geological structures. Therefore, this research was conducted to map the existence of geological structures, temperature estimates, permeable zones, geothermal prospect zone and optimal locations for drilling. However, this study only focus on the permeable zone.

To obtain the information related to permeable zone, a remote sensing and gravity analysis methodology were used. The artificial lighting technique in DEMNAS datasets were applied in this study using eight different sun azimuth angles. This technique is able to represent fracture zones and major geological structures on a large scale. High fracture zone which indicates a permeable zone, predominantly formed around major faults. The combination of DEMNAS data and composite bands 432 and 567 on Landsat 8 have been able to delineate the lithology in this area. Furthermore, the derivative techniques in gravity data, namely First Horizontal Derivative (FHD) and Second Vertical Derivative (SVD) have provide information that some of major geological structures that appear on the surface such as Lembang fault, Haruman Fault and Ciater Fault have continuity to the subsurface, while another geological structures are not visible on the surface.

Integration of structural geological analysis with MT model and water geochemical analysis has produced in a conceptual model of the geothermal system in this area. Based on the conceptual model that has been made, the upflow zone is located in the DMS and CTR areas, while the outflow zone is located in the North and South of Tangkuban Parahu mountain. The reservoir zone is located under the Tangkuban Parahu crater, this is indicated by the presence of a dome in the MT model. The area has temperatures ranging from 240-250oC at a depth of BOC -500m below the surface. The heat source may have been formed from residual magma intrusion. The optimal area for drilling from the results of this study is around the DMS and CTR manifestations. With a note that the drilling location must consider a volcanic hazard area (hydrothermal eruption).

"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Gesang Panggrahito Pati
"Objek penelitian berada di lapangan Tangkuban Parahu yang diduga memiliki potensi cadangan panasbumi. Sedikitnya informasi dan penelitian mengenai lapangan panasbumi Tangkuban Parahu menjadikan salah satu problem eksplorasi panasbumi di daerah ini. Tujuan dari penelitian ini adalah melakukan studi pemetaan struktur geologi dengan cara mengintegrasikan data penginderaan jauh menggunakan data LiDAR' dan bawah permukaan dari data Magnetotellurik. Struktur geologi yang mengontrol sistem geothermal di Gunung Tangkuban Parahu kemungkinan didominasi oleh struktur lokal yang berasal dari struktur vulkanik dan tektonik berarah relatif barat-timur serta struktur kaldera kemungkinan berperan sebagai pembatas keberadaan sistem geothermal Tangkuban Parahu terutama di sisi selatan dan barat. Manifestasi yang ada di daerah penelitian berupa fumarole di Kawah Domas dan Kawah Ratu. Serta manifestasi berupa hot spring di area Kancah, Ciater, Batugede, Jabong, Batukapur dan Ciracas. Sehingga temperatur reservoir diperkirakan berada pada temperatur 240 ndash; 250oC. Hasil inversi 3D data MT menunjukan adanya pola updome di sekitar kompleks kawah Tangkuban Parahu. Pola resistivitas seperti ini kemungkinan berasosiasi dengan zona upflow. Sementara outflow dari sistem geothermal mengarah ke Kancah dan Ciater. Zona rekomendasi untuk 3 sumur pemboran ditentukan dengan memperhitungkan beberapa aspek yaitu adanya keberadaan zona patahan, temperatur tinggi, zona tidak asam dan berada di elevasi rendah.
The object of research is in Tangkuban Parahu field that is suspected to have the potential of geothermal reserves. The lack of information and research on the Tangkuban Parahu geothermal field is one of the problems of geothermal exploration in this area. The purpose of this research is to study the mapping of geological structures by integrating remote sensing data using LiDAR and subsurface data from MT data. The geological structure that controls the geothermal system in Mount Tangkuban Parahu may be dominated by local structures originating from volcanic structures and tectonic trends relative to the West East and caldera structures likely to act as a barrier to the existence of Tangkuban Parahu geothermal system especially on the south and western sides. Manifestations that exist in the research area in the form of fumarole Kawah Domas and Kawah Ratu. And manifestations of hot spring in the area Kancah, Ciater, Batugede, Jabong, Batukapur and Ciracas. So the reservoir temperature is estimated to be at a temperature of 240 250oC. The inversion result of 3D MT data shows the updome pattern around Tangkuban Parahu crater complex. This resistivity pattern is probably associated with an upflow zone. While the outflow of the geothermal system leads to Kancah and Ciater. The recommendation zone for 3 drilling wells is determined by taking into account several aspects, namely the presence of fault zones, high temperatures, non acidic zones and at low elevations."
2018
T50378
UI - Tesis Membership  Universitas Indonesia Library
cover
Annisa Dwi Hafidah
"Pulau Sumatera memiliki potensi panas bumi terbesar di Indonesia yang tersebar di sepanjang zona subduksi antara lempeng Hindia-Australia dan lempeng Eurasia, salah satunya adalah lapangan geothermal ldquo;A rdquo;. Secara umum, litologi di wilayah penelitian didominasi oleh batuan vulkanik yang berumur kuarter dengan manifestasi berupa fumarol dan mata air panas. Struktur geologi berupa patahan dan pendugaan intrusi batuan yang diidentifikasi sebagai heat source menjadi target dalam penelitian ini.
Metode penginderaan jauh dengan analisis Fault Fracture Density FFD dilakukan untuk mengidentifikasi gejala struktur patahan di permukaan yang berasosiasi dengan manifestasi dan metode gravitasi dengan analisis First Horizontal Derivative FHD dan Second Vertical Derrivative SVD dilakukan untuk mengidentifikasi patahan di bawah permukaan.
Hasil dari penelitian ini menunjukkan bahwa kemunculan manifestasi berada pada zona FFD tinggi dengan kerapatan sebesar 4 km/km2. Analisis data FHD dan SVD dapat mengkonfirmasi patahan berarah Barat Daya-Timur Laut, Barat Laut-Tenggara, dan struktur kaldera dengan jenis patahan keseluruhan berupa patahan normal.
Hasil inversi 3D gravitasi mengidentifikasi batuan clay cap memiliki densitas 2.015 gr/cc sampai 2.24 gr/cc, batuan reservoir memiliki densitas 2.3 gr/cc sampai 2.4 gr/cc dan batuan heat source memiliki densitas 2.5 gr/cc sampai 2/8 gr/cc. Zona upflow terletak di bagian Barat wilayah penelitian dengan suhu reservoir berkisar antara 200°C-220°C.

Sumatra Island has the largest geothermal potential in Indonesia spread along the subduction zone between the Indies Australian plate and the Eurasian plate. ldquo A rdquo geothermal field is one of them. In general, lithology in the study area is dominated by quaternary volcanic rocks and it has some manifestations such as fumaroles and hot springs. This study is focus on identify the structure and intrusion that identified as a heat source.
Remote sensing methods with Fault Fracture Density FFD analysis were performed to identify symptoms of surface fractures associated with manifestations and gravity methods with First Horizontal Derivative FHD and Second Vertical Derivative SVD analyzes performed to identify subsurface fractures.
The results of this study indicate that the appearance of manifestation is in the high FFD zone with a density of 4 km km2. Analysis of FHD and SVD data can confirm the Southwest Northeast, Northwest Southeast fault, and caldera structure with the overall fracture type are normal fault.
The result of gravity 3D inversion identifies clay cap rock has density 2,015 gr cc to 2,24 gr cc, reservoir rock has density 2,3 gr cc to 2,4 gr cc and heat source rock has density 2.5 gr cc to 2 8 gr cc . The upflow zone is located in the west of the research area with reservoir temperatures ranging from 200°C 220°C.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2018
T49621
UI - Tesis Membership  Universitas Indonesia Library
cover
Alifia Fatima Noor Firdausi
"Wilayah Penelitian “AF” merupakan salah satu wilayah prospek geotermal di Jawa Timur yang ditandai dengan keberadaan manifestasi permukaan berupa mata air paanas. Penelitian ini bertujuan untuk dapat mengidentifikasi komponen sistem geotermal pada wilayah “AF” berdasarkan integrasi data gaya berat dan penginderaan jauh sebagai data utama, serta analisis geologi dan geokimia sebagai data pendukung. Adapun komponen sistem geotermal yang berhasil diidentifikasi melalui pengolahan data gaya berat dan penginderaan jauh adalah struktur patahan dan indikasi sumber panas. Sumber panas sistem geotermal di wilayah “AF” diduga berasal dari badan magma di bawah Gunung Kawi-Butak yang menunjukkan anomali gravitasi yang rendah. Adapun keberadaan struktur pengontrol mata air panas SG-1 dapat dideteksi melalui FFD secara manual dan otomatis menggunakan filter Sobel, dan diduga berhubungan dengan patahan berdasarkan peta geologi dan yang terdeteksi melalui analisis FHD dan SVD. Dengan adanya dugaan struktur patahan pengontrol manifestasi SG-1, didukung pH fluida yang netral, maka area sekitar manifestasi SG-1 cukup dianggap dapat menjadi area prospek geotermal di wilayah “AF”.

The “AF” Research Area is one of the geothermal prospect areas in East Java which is characterized by the presence of surface manifestations in the form of hot springs. This study aims to be able to identify the components of the geothermal system in the "AF" area, based on the integration of gravity and remote sensing data as the main data, as well as geological and geochemical analysis as supporting data. The components of the geothermal system that have been identified through the processing of gravity and remote sensing data are fault structures and indications of heat sources. The magma body under Mount Kawi-Butak, which has a low gravity anomaly, is assumed to be the source of heat for the geothermal system in the "AF" area. The existence of the SG-1 hot spring control structure can be detected through manual and automatic FFD using Sobel filter, and is suspected to be related to faults based on geological maps and the one detected by FHD and SVD analysis. With the suspected fault structure controlling the SG-1 manifestation, supported by its neutral pH, the area around the SG-1 manifestation is considered to be a geothermal prospect in the "AF" region."
Depok: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fadhila Friany Putri
"Pada era modern saat ini diperlukan inovasi teknologi untuk melakukan survei geotermal yang efisien namun tetap akurat. Salah satu metode yang tengah dikembangkan adalah menggunakan remote sensing. Dalam penelitian ini, aplikasi metode remote sensing yaitu Fault and Fracture Density (FFD) digunakan untuk mendeteksi zona permeabel dengan cara menilai area yang memiliki kepadatan struktur tinggi berdasarkan kelurusan yang terbentuk oleh aktivitas patahan dan rekahan. Namun, kenyataannya tidak semua kelurusan berasal dari aktivitas patahan, sehingga perlu dilakukan pemrosesan sinyal digital untuk menyeleksinya. Penelitian dilakukan menggunakan citra Landsat 8 yang diproses melalui dimension reduction metode Principal Component Analysis dan proses filtering berupa filter konvolusi directional dan Laplacian untuk meningkatkan kualitas citra. Kelurusan dari citra Landsat 8 diekstrak secara otomatis menggunakan algoritma Edge Detection, lalu dikomparasikan dengan kelurusan dari citra IFSAR yang diekstrak secara manual. Hasilnya dalam bentuk peta FFD, daerah dengan kepadatan kelurusan tertinggi berada di sisi tenggara dan di sekitar kawah G.K. Untuk membuktikan keefektifan metode ini, digunakan pula data gravitasi yang dapat mengonfirmasi keberadaan struktur patahan secara geofisika. Hasil integrasi kedua data tersebut disertai data penunjang lainnya menunjukkan zona permeabel untuk lokasi pengeboran yang paling efektif berada di dekat manifestasi APKK dan APSE.

In this modern era, technology is needed to conduct geothermal surveys that are efficient but still accurate. One method that is being developed to survey geothermal potential is remote sensing. In this study, the application of remote sensing methods namely Fault and Fracture Density (FFD) is used to evaluate permeable zones by evaluating areas that have high faults and joints structures. However, not all of lineament presence caused by fault activities, so digital signals processing need to be carried out. This research used Landsat 8 imagery which is done through dimension reduction using Principal Component Analysis and the filtering process such as Sobel, Line Detection, Prewitt, and Laplacian convolution filters to improve image quality. Lineament extraction from Landsat 8 images is performed automatically using Edge Detection while lineament from IFSAR image extracted manually. The extracted lineaments then compared in the form of FFD maps. To prove the effectiveness of this method, gravity data are also used to confirm the fault presence geophyisically. The results of these data which integrated with other supporting data showed the suitability of covering permeable zones which can be most effective drill point areas are near the manifestations of APKK and APSE."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
M Ahganiya Naufal
"Tahap eksplorasi pada pengembangan lapangan geotermal merupakan tahap yang paling penting untuk memahami sistim geotermal. Pemahaman sistim geotermal yang baik dapat meminimalkan risiko kegagalan pada saat pemboran sumur produksi dilakukan. Eksplorasi geofisika yang digunakan penelitian ini adalah metode gravitasi. Metode gravitasi pada prinsipnya mengidentifikasi variasi densitas pada bawah permukaan sehingga dapat digunakan untuk delineasi struktur bawah permukaan. Kombinasi antara metode upward continuation dan second vertical derivative dilakukan untuk mengkarakterisasi struktur geologi baik arah kemiringan, perkiraan kedalaman, perkiraan sudut kemiringan dan jenis struktur.
Hasil ML-SVD menunjukan bahwa karakteristik struktur geologi daerah penelitian memiliki dip >60°, terdapat patahan normal maupun reverse dan mampu mengidentifikasi struktur pada kedalaman tertentu. Terdapat pola struktur melingkar yang didugga berasosiasi dengan kaldera Pangkalan. Pemodelan data gravitasi 2D dilakukan untuk mengetahui sebaran densitas bawah permukaan. Pemodelan densitas menunjukan bahwa densitas lapisan clay cap sebesar 2,28 g/cc dan lapisan reservoir sebesar 2,55 g/cc. Analisa geokimia gas menunjukan temperatur rata-rata reservoir sebesar 253 ºC. Zona upflow daerah penelitian berada didalam struktur melingkar.

Exploration stage on geothermal development are the most important stage to understand the geothermal system of research area. A good understanding of geothermal system can minimize the risk of failure in drilling stage. Geophysical exploration method in this research is gravity method. The gravity method in principle identifies density variations below the surface so that it can be used to delineate subsurface structures. The combination of the upward continuation and second vertical derivative methods is carried out to characterize the geological structure both the slope direction, depth estimation, dip estimation and type of structure.
ML-SVD result show that fault structure at research area have value of dip > 60º, fault configuration and depth of fault under rock layers. Fault with circular pattern have been found that expected associate with Pangkalan caldera. 2D density model is done to determinate the distribution of subsurvace density. 2D density model show that clay cap have density value 2.28 g/cc and reservoir 2.55 g/cc. Gas geochemistry analysis show the temperatur at reservoir 253 ºC. The upflow zone estimated inside the circular structure of research area.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T53513
UI - Tesis Membership  Universitas Indonesia Library
cover
Adam Kurniawan
"Tulehu terletak di bagian Timur pulau Ambon, Maluku. Tulehu merupakan daerah dengan prospek panasbumi yang tinggi. Suhu reservoir dari sistem tersebut diperkirakan mencapai lebih atau sama dengan 230oC. Sudah cukup banyak penelitian yang dilakukan disini untuk mengetahui kondisi geologi, geokimia, dan geofisika, sehingga datanya dapat dijadikan data pendukung pada penelitian ini. Interpretasi geologi tidak lepas dari interpretasi dan analisis struktur geologi dan litologi atau kelompok batuan yang menyusunnya. Penelitian ini akan menggambarkan kondisi geologi daerah Tulehu berdasarkan interpretasi remote sensing dan data hasil observasi lapangan yang sudah dilakukan berupa data struktur dan satuan litologi, selanjutnya akan dipadukan dengan data geokimia dan geofisika untuk membuat model konseptual geotermal WKP Tulehu, penentuan sistem geotermal, delineasi area prospek, hingga rekomendasi titik pemboran. Daerah penelitian berada pada daerah Suli, Tial, Tulehu, dan Waai, Kecamatan Salahutu, Provinsi Maluku. Penelitian ini diawali dengan interpretasi data remote sensing berupa citra Landsat 8, dan DEM yang diproses menggunakan software ArcGIS 10.2.1, untuk mendapatkan peta geologi tentatif. Peta tersebut kemudia digabungkan dengan data geologi untuk mendapatkan peta geologi yang lebih komprehensif sehingga dihasilkan bahwa sesar Banda dan sesar Huwe merupakan sesar normal yang membuat graben dengan area gunung Eriwakang yang mengalami depresi, satuan litologi penyusunnya terdiri atas tujuh satuan yang dibagi berdasarkan genesa dan satuan vulkanostratigrafi. Peta geologi yang lebih komprehensif dengan semua analisisnya kemudian digabungkan dengan data geokimia dan geofisika untuk mendapatkan gambaran model konseptual geotermal sehingga diketahui sistem geotermal WKP Tulehu merupakan system high enthalpy, liquid-dominated system. Berdasarkan hasil analisis WKP Tulehu memiliki luas area prospek sekitar 3,4 Km2 dan potensi geotermal sebesar 17-34 MW.

Tulehu is located in the eastern part of the island of Ambon, Maluku. Tulehu is an area with high geothermal prospects. The reservoir temperature of the system is estimated to be more or equal to 230oC. There has been quite a lot of research conducted here to determine geological, geochemical, and geophysical conditions, so that the data can be used as supporting data in this study. Geological interpretation cannot be separated from the interpretation and analysis of the geological and lithological structures or rock groups that compose them. This study will describe the geological conditions of the Tulehu area based on remote sensing interpretation and field observation data that have been carried out in the form of structural data and lithological units, which will then be combined with geochemical and geophysical data to create a geothermal conceptual model for the WKP Tulehu, determination of the geothermal system, delineation of the prospect area, up to the drilling point recommendation. The research area is in the Suli, Tial, Tulehu, and Waai areas, Salahutu District, Maluku Province. This research begins with the interpretation of remote sensing data in the form of Landsat 8 imagery, and DEM processed using ArcGIS 10.2.1 software, to obtain a tentative geological map. The map is then combined with geological data to obtain a more comprehensive geological map so that the Banda fault and the Huwe fault are normal faults that make the graben with the depressed mount Eriwakang area, the constituent lithology unit consists of seven units divided by genesis and volcanostratigraphic units. A more comprehensive geological map with all the analysis is then combined with geochemical and geophysical data to get a conceptual description of the geothermal model so that it is known that the WKP Tulehu geothermal system is a high enthalpy, liquid-dominated system. Based on the analysis, the WKP Tulehu has a prospect area of about 3.4 km2 and a geothermal potential of 17-34 MW."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Badrul Munir Habibulloh
"Sumatra Indonesia merupakan salah kerangka tektonik paling menarik di dunia untuk dipelajari saat ini. Termasuk di dalamnya terdapat sesar Semangko yang menjadi salah satu struktur geologi di sana. Identifikasi struktur bawah permukaan biasa dilakukan menggunakan metode seismik refraksi untuk mendapatkan data dengan resolusi tinggi. Di sisi lain, metode gravitasi juga dapat digunakan untuk mengetahui tingkat kerapatan massa pada batuan penyusun kerak bumi. Pada penelitian kali ini, penulis mencoba mengidentifikasi karakter struktur sesar dengan studi kasus sesar Semangko di Sumatra Barat menggunakan metode gravitasi MS-SVD. Hasilnya, metode MS-SVD bekerja dalam mengidentifikasi sesar Semangko di mana memiliki orientasi Barat Laut–Tenggara dan dari 8 sesar putus-putus dengan masing-masing sesar dilakukan 2 slicing, didapatkan 17 slicing memiliki sudut dip mendekati 90° yang dapat ditafsirkan sebagai sesar strike slip dan sesuai dengan kondisi sebenarnya.

Sumatra Indonesia is one of the most interesting tectonic frameworks in the world to study today. This includes the Semangko fault which is one of the geological structures there. Identification of subsurface structures is usually done using refractive seismic methods to obtain high resolution data. On the other hand, the gravity method can also be used to determine the level of mass density in the rocks that formed the earth's crust. In this study, the author tries to identify the structural character of the fault with a case study of the Semangko fault in West Sumatra using the MS-SVD gravity method. As a result, the MS-SVD method works in identifying the Semangko fault which has a Northwest – Southeast orientation and from 8 faults with 2 slicing each fault, 17 slicings have a dip angle close to 90° which can be interpreted as strike strike slip fault and in accordance with actual conditions."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dandi Baskoro Soebakir
"Keberadaan struktur geologi merupakan salah satu parameter penting dalam menentukan zona permeabel pada suatu sistem geotermal. Penelitian ini dilakukan di salah satu area prospek geotermal di zona Sistem Sesar Sumatera (GSF) yang termasuk dalam segmen Angkola dan Barumun yang bertujuan untuk mengidentifikasi kemenerusan fitur permukaan hingga bawah permukaan terutama struktur geologi yang berkaitan erat dengan zona permeabel dengan mengintegrasikan data geologi, geokimia, dan geofisika. Teknologi remote sensing digunakan untuk mengidentifikasi struktur geologi yang terobservasi di permukaan yang dikorelasikan dengan persebaran manifestasi permukaan. Namun, tidak semua struktur geologi yang terobservasi di permukaan dapat diamati dan kemenerusannya dari permukaan hingga bawah permukaan dilakukan dengan pendekatan geofisika menggunakan data magnetotelurik (MT) dan gravitasi. Interpretasi struktur geologi permukaan berdasarkan analisis remote sensing dan persebaran manifestasi permukaan memiliki korelasi yang positif dengan hasil gravitasi adanya struktur graben dari zona GSF yang memiliki orientasi baratlaut-tenggara. Kelurusan dan karakteristik (arah dan kemiringan) struktur ditandai dengan adanya kontras nilai gravitasi, nilai Horizontal Gradient Magnitude (HGM) maksimum, dan nilai zero Second Vertical Derivative (SVD) serta analisis Multi Scale-Second Vertical Derivative (MS-SVD). Hasil interpretasi struktur bawah permukaan gravitasi berkorelasi positif dengan analisis parameter MT (splitting curve MT) yang dapat mengindikasi zona struktur bawah permukaan. Gabungan interpretasi struktur permukaan dan bawah permukaan teridentifikasi adanya 5 struktur (F1, F2, F3, F4, dan F5) yang diklasifikasikan sebagai Struktur Pasti (F1, F2, F3, dan F4) dan Struktur Diperkirakan (F5) yang memiliki orientasi baratlaut-tenggara. Struktur F3 yang berorientasi baratlaut-tenggara merupakan struktur utama yang berperan sebagai fluid conduit (zona permeabel) yang dibuktikan dengan adanya manifestasi mata airpanas bertipe klorida. Berdasarkan hasil pemodelan inversi 3-D MT dan pemodelan kedepan 2-D gravitasi dapat mendelineasi zona reservoir pada kedalaman 1500 – 2000-meter yang dikontrol oleh struktur F3 dan zona reservoir berasosiasi dengan batuan metasediment yang nantinya dapat menentukan lokasi sumur pengeboran. Untuk memvisualisasikan sistem geotermal secara komprehensif, maka dikembangkan model konseptual dengan mengintegrasikan model geofisika yang memiliki kualitas data optimum dengan data geologi dan geokimia yang saling berkorelasi, sehingga dapat dijadikan dasar dan acuan dalam menentukan lokasi pengembangan sumur produksi dan reinjeksi dan menurunkan resiko kegagalan dalam well targeting.

The existence of geological structures is one of the important parameters in determining the permeability zone in a geothermal system. This study was conducted in one of the geothermal prospect areas in the Sumatera Fault System (GSF) zone included in the Angkola and Barumun segments which aims to identify the continuity of surface to subsurface features, especially geological structures that are closely related to permeability zones by integrating geological, geochemical, and geophysical data. Remote sensing technology is used to identify geological structures observed at the surface that are correlated with the distribution of surface manifestations. However, not all surface-observed geological structures can be observed and their continuity from the surface to the subsurface is done with a geophysical approach using magnetotelluric (MT) and gravity data. Interpretation of surface geological structures based on remote sensing analysis and the distribution of surface manifestations has a positive correlation with the gravity results of the graben structure of the GSF zone which has a northwest-southeast orientation. The alignment and characteristics (direction and slope) of the structure are characterized by the contrast of gravity values, maximum Horizontal Gradient Magnitude (HGM) values, and zero Second Vertical Derivative (SVD) values as well as Multi Scale-Second Vertical Derivative (MS-SVD) analysis. The results of gravity subsurface structure interpretation are positively correlated with MT parameter analysis (splitting curve) which can indicate subsurface structure zones. The combined interpretation of surface and subsurface structures identified 5 structures (F1, F2, F3, F4, and F5) classified as Certain Structures (F1, F2, F3, and F4) and Estimated Structure (F5) that have a northwest-southeast orientation. The northwest-southeast oriented F3 structure is the main structure that acts as a fluid conduit (permeability zone) as evidenced by the manifestation of chloride-type hot springs. Based on the results of 3-D MT inversion modeling and 2-D gravity forward modeling, it can delineate the reservoir zone at a depth of 1500 - 200 meters controlled by the F3 structure and the reservoir zone is associated with metasedimentary rocks which can later determine the location of drilling wells. To visualize the geothermal system comprehensively, a conceptual model was developed by integrating geophysical models that have optimum data quality with geological and geochemical data that are correlated, so that it can be used as a basis and guide in determining the location of production well development and reinjection and reduce the risk of failure in drilling targets."
Jakarta: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Aditya Noor Permadi
"Telah dilakukan penelitian terhadap lapangan panas bumi PATRA guna mengidentifikasi struktur geologi bawah permukaan berdasarkan interpretasi dari data gravitasi. Pada penelitian ini data utama adalah data gravitasi yang didukung oleh data geologi permukaan dan metode geofisika lainnya berupa data magnetotellurik. Secara geologi, daerah penyelidikan dibagi menjadi 3 satuan batuan, yaitu; Satuan batuan malihan yang terdiri dari batuan sekis, pilit dan kuarsit, Satuan batuan Lempung dan Satuan batuan alluvium. Struktur geologi yang berkembang didaerah penyelidikan berupa sesar-sesar mendatar yang mempunyai trend hampir utara-selatan, sedangkan sesar-sesar normalnya berkembang dengan trend hampir berarah barat-timur. Dari data pengolahan gravitasi tahap awal yang telah dilakukan, dengan densitas rata-rata sebesar 2.33 gr/cc dari metode parasnis yang diduga merupakan nilai dari batuan metamorf.
Struktur geologi yang ditemukan pada daerah penelitian berdasarkan hasil gabungan filtering data gravitasi menyebutkan terdapat dua buah struktur geologi patahan naik yang saling berhadapan, sangat berkemungkinan untuk menjadi struktur graben dibawah permukaan. Sistem panas bumi lapangan PATRA merupakan sistem tectonic setting. Struktur geologi bawah permukaan bumi dapat teridentifikasi dari berbagai pengolahan dan filtering data gravitasi yang menunjukkan bahwa jalur fluida panas berada pada bagian barat dan bagian tenggara daerah penelitian.

The research has conducted on geothermal field PATRA to identify subsurface geological structures based on interpretation of gravity data.In this study,the main data is gravity data that were supported by surface geological data and other geophysical methods, magnetotelluric data. Geologically, the investigation area was divided into three lithologies, there are metamorphic rock composed of schist, phylit and quartzite, clay and alluvium.Geological structures that developing the area of investigations such as horizontal faults that has almost north south trend, while the normal faults develop with the trend nearly east west. Processing of gravity data at early stage has been done with an average density of 2 33 gr cc from parasnis method which believed as the value of the metamorphic rocks.
The geological structure discovered in area of research based on the combined results of filtering gravity data mentioned there are two geological structure thrust fault that face each other, mostly identified as a graben structure below the surface. PATRA 39 s geothermal field system is tectonic setting. Geological structure below the earth 39 s surface can be identified from variety of processing and filtering gravity data that indicating the hot fluid paths is western and the southeastern part of area of research.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
T47427
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>