Hasil Pencarian  ::  Simpan CSV :: Kembali

"This book focuses on civil engineering materials and nanotechnology. Highlighting recent advances in the field of nano-engineered cementitious composites, it discusses their key principles, design and fabrication, testing and characterization, performance and mechanisms, as well as applications. Future developments and remaining challenges are also outlined. "

"ABSTRAKBerbagai penelitian mengenai teknologi nano terus difokuskan pada nanopartikel semikonduktor seng oksida (ZnO) dengan berbagai potensi strategis yang dimilikinya. Dalam penelitian ini telah dilakukan sintesis nanopartikel ZnO dengan teknik presipitasi yang dikombinasikan dengan perlakuan pra-hidrotermal dengan variasi waktu tahan 0, 24, 48 dan 72 jam yang secara khusus ditujukan untuk menginvestigasi pengaruh perlakuan tersebut terhadap ukuran nanopartikel, kristalinitas dan energi celah pita nanopartikel yang dihasilkan. Hasil penelitian menunjukkan bahwa meningkatnya waktu perlakuan pra-hidrotermal dari 0 hingga 72 jam mampu meningkatkan ukuran nanopartikel ZnO dari 3.47 menjadi 13.85 nm, serta menurunkan energi celah pita dari 3.099 menjadi 3.076 eV.

---

ABSTRACTMany research on nanotechnology has been focused on zinc oxide (ZnO) semiconductor nanoparticles which has strategic potentials. In the current research the synthesis of ZnO nanoparticles has been performed, using a precipitation technique assisted by a pre-hydrothermal treatment with various holding time of 0, 24, 48 and72 hours. This route was specifically aimed at investigating the effect of this treatment on the nanocrystallite size, crystallinity and band gap energy of the resulting nanoparticles. The result of investigation showed that an increasing of pre-hydrothermal treatment duration from 0 to 72 hours has increased the crystallite size of ZnO nanoparticles from 3.47 to 13.85 nm, and decreased the band gap energy from 3.099 to 3.076 eV."

"Titania nanotube dengan dopan karbon (C-TiNT) telah berhasil disentesis dan diuji untuk degradasi fenol. Sintesis dilakukan dengan dua tahap yaitu pembentukan titania nanotube dengan metode hydrothermal dan pemberian dopan karbon pada fotokatalis TiO2 nanotube. Pemberian dopan karbon dilakukan dengan dua metode post treatment yaitu kalsinasi dan hydrothermal. Selain itu, juga dilakukan variasi jenis sumber dopan karbon yaitu glukosa dan 1-propanol. Karakterisasi dilakukan dengan menggunakan analisis SEM-EDS, XRD, dan DRS.Hasil SEM menunjukkan hasil morfologi nanotube telah terbentuk dan terdapat dopan karbon didalamnya. Analisis XRD menunjukkan pada semua katalis terbentuk kristal anatase 100% dengan ukuran kristal 7 - 10 nm. Karakterisasi DRS menunjukkan bahwa katalis nanotube dengan dopan karbon memberikan respon yang baik pada panjang gelombang cahaya tampak dengan nilai band gap 3,0 eV hingga 3,20 eV. Hasil pengujian terhadap fenol menunjukkan katalis C-TiNT mampu mendegradasi fenol dengan kinerja 60% hingga 80%. Nilai ini jauh lebih baik dibandingkan dengan TiO2 nanopartikel yang hanya mampu mendegradasi fenol dengan kinerja sebesar 33%.

---

A variety of carbon doped on titania nanotube (C-TiNT) have already syntesied well as investigeted for phenol degradation. Synthesis has been conducted in two steps. First step was synthesis of titania nanotube by using hydrothermal method. Second step was incorporated carbon doped to the photocatalyst TiO2 nanotube. Carbon doped was also given by using two methods of post treatment. They are calcination and hydrothermal methods. In addition, we also examined two carbon sources of dopan. They are glucose and 1-Propanol. The prepared samples were characterized with SEM-EDS, XRD, and DRS.

The SEM result showed that nanotube morphology was already exist and contained with carbon. XRD analysis showed existence of anatase crystalline phase reached 100%, and size of crystal was around 7-10nm. DRS result showed good response to visible light range (λ > 400nm) which has band gap value at 3,0 eV-3,20 eV. The results of phenol degradation showed those photocatalyst have performance in range 60% - 80%.This result is much better compared to TiO2 nanoparticle which only degradated 33% of phenol."

"This book presents the fabrication of optoelectronic nanodevices. The structures considered are nanowires, nanorods, hybrid semiconductor nanostructures, wide bandgap nanostructures for visible light emitters and graphene. The device applications of these structures are broadly explained. The book deals also with the characterization of semiconductor nanostructures. "

"Applied nanotechnology takes an integrated approach to the scientific, commercial and social aspects of nanotechnology, exploring :

- The relationship between nanotechnology and innovation

- The changing economics and business models required to commercialize innovations in nanotechnology

- Product design case studies

- Applications in various sectors, including information technology, composite materials, energy, and agriculture

- The role of government in promoting nanotechnology

- The potential future of molecular self-assembly in industrial production

In this 2e, new chapters have been added on energy applications and the role of nanotechnology in sustainability. The section on the safety of nanoproducts has also been updated, and material on funding and commercialization has been updated and expanded, with new case studies illustrating the experience of new startups in a challenging economic environment."