Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 54597 dokumen yang sesuai dengan query
cover
Abdul Rafii Lazuardian Ramadhan
"Kebutuhan akan refrigeran sekunder yang dapat menyerap kalor dengan nilai tinggi sangatlah penting saat ini. Ice slurry sebagai media refrigeran sekunder memiliki kelebihan yang lebih unggul dibandingkan refrigeran sekunder lainnya seperti flat ice, block ice, maupun air tawar. Ice slurry dapat menyerap kalor lebih banyak jika dibandingkan dengan air tawar maupun air laut biasa, ini dikarenakan ice slurry menyimpan lebih banyak kalor laten. Jika dibandingkan dengan flat ice, maupun block ice, ice slurry memiliki keunggulan yaitu ice slurry dapat dialirkan menggunakan sistem perpipaan. Ini dikarenakan ice slurry merupakan larutan yang memiliki partikel es mikroskopis di dalamnya dengan fraksi es tertentu.

The secondary refrigerant which could absorb high amount of heat is very important and highly required. Ice slurry is an advanced secondary refrigerant media which is superior from other secondary refrigerant such as flat ice, block ice, or pure water. Ice Slurry can adsorb more heat if compared towards pure water or sea water. It is possible because Ice Slurry holds more latent heat. When compared towards flat ice or block ice, ice slurry is better in the flexible side because it able to be flowed by pipes. Its flexibility is caused of its form as a liquid which has microscopic ice particle inside with sorted ice fraction.
"
Depok: Fakultas Teknik Universitas Indonesia, 2017
S68078
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fajri Ashfi Rayhan
"Ice Slurry merupakan hasil rekayasa sistem pendingin pada evaporator dengan memanfaatkan air laut sebagai media freezing point depressing additive. Teknologi ice slurry sangat berperan penting dalam proses penangkapan ikan di laut lepas, karena kualitas ikan yang di dinginkan oleh ice slurry jauh lebih baik di bandingkan oleh media pendingin lainya. Hal tersebut disebabkan karena ikan didinginkan langsung oleh air laut yang suhu kristal es dapat mencapai dan seluruh badan ikan dapat terselubungi penuh dengan es. Penggunan propane sebagai media refrigerant dapat meningkatkan waktu terbentuknya ice slurry dan propane merupakan refrigerant yang ramah lingkungan.
Tujuan dari penelitian ini adalah untuk merancang prototipe ice slurry dan menganalisis perfroma sistem dengan membandingkan kualitas es antara penggunaan refrigerant R-22 dan propane. Parameter kualitas es pada penelitian ini adalah banyaknya es yang terbentuk terhadap lamanya waktu sistem bekerja dan ketahanan scraper dalam melakukan pengikisan es didalam evaporator. Sehingga semakin cepat ice slurry terbentuk dan scraper dapat terus beroperasi, maka semakin baik sistem rancangan. Variasi antara putaran scraper dan pompa merupakan variabel penentu kualitas es. Hasil dari penelitian ini menunjukan bahwa pembentukan ice slurry dengan refrigerant propane lebih baik dibandingkan R-22 yang ditinjau bedasarkan waktu penurunan suhu air laut, kestabilan tekanan kerja dan perfoma scraper.

Ice Slurry is engineered cooling system on the evaporator with the use of seawater as a medium freezing point depressing additive. Ice slurry technology plays an important role in the process of fishing on the high seas, because the quality of the fish is cooled by ice slurry is much better compared to other cooling media. This is because the fish is cooled directly by seawater temperature ice crystals can reach -10 ℃ and whole body fish can be enveloped filled with ice. The use of propane as a refrigerant media can also increase the time the formation of ice slurry and propane is an environmentally friendly refrigerant.
The Purpose of this research is to create a prototype of ice slurry and analyze perfrom of system by comparing the quality of the ice between the use of refrigerant R-22 and propane. Ice quality parameters in this study is the number of ice that forms on the length of time the system works and ablitity of scraper scorns of ice in evaporator. So the faster the ice slurry is formed and scraper can keep operated, the better the system design. Variations between rounds scraper and pump are variables determine the quality of the ice. The results of this study indicate that the formation of ice slurry with refrigerant propane better than R-22, which are reviewed by temperature of sea water, the stability of working pressure and performence of scraper.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S63704
UI - Skripsi Membership  Universitas Indonesia Library
cover
Kuswantoro
"Kenaikan temperatur udara akibat penipisan lapisan ozon dan pemanasan global merupakan salah satu isu yang saat ini tengah menarik perhatian dunia. Penggunaan refrigerant berbasis chlorin (CFCs dan HCFCs) dan HFCs merupakan salah satu penyebab utamanya sehingga mendorong negara-negara industri untuk sepakat menetapkan masa akhir penggunaan refrigerant ini sebagaimana yang tertuang dalam protokol Montreal dan Kyoto. Hal ini membuat refrigerant alami seperti amonia dan hidrokarbon kembali menjadi populer, namun karena pada umumnya refrigerant ini dapat terbakar dan beracun membuat sistem refrigerasi tidak langsung lebih aman diterapkan untuk sistem ini.
Sistem refrigerasi tidak langsung menggunakan refrigerant kedua yang sifatnya aman terhadap manusia dan lingkungan. Ice slurry merupakan salah satu refrigerant kedua yang sangat menarik dikarenakan kapasitas panasnya yang besar akibat pemanfaatan kalor laten dan dapat diaplikasikan untuk temperatur sangat rendah. Masalah yang sering muncul pada pembuatan ice slurry ialah kecenderungan es untuk menempel pada dinding perpindahan kalor sehingga di daerah dekat dinding terdapat lapisan yang memiliki konsentrasi es yang lebih tinggi dari titik lainnya, lapisan ini biasa disebut sebagai lapisan mushy. Adanya lapisan es ini akan meningkatkan resistansi thermal sistem. Pada umumnya lapisan mushy ini dibersihkan dengan cara disapu menggunakan alat mekanik yang disebut scraper.
Penelitian ini bertujuan untuk membuat scraper yang dapat dipasangkan pada auger yang telah ada dan melihat pengaruhnya terhadap laju perpindahan kalor dan kepadatan es pada ice slurry yang terbentuk. Berdasarkan pengukuran temperatur larutan selama 200 menit, terhitung laju perpindahan kalor rata-rata untuk auger yang telah dilengkapi scraper mengalami peningkatan sebesar 4% pada fase liquid dan 93% pada fase liquid-ice terhadap laju perpindahan kalor rata-rata.

Increment change in air temperature as a result of ozone depletion and global warming are issue that attracts world attention these days. The wide use of chlorine base refrigerant (CFCs and HCFCs) and HFCs are one of the major factor that cause it, this fact encourage industrial countries agree to set the phase out of these refrigerant which is written in Montreal and Kyoto protocol. This rule make natural refrigerant like ammonia and hydrocarbon to become attractive again, however because most natural refrigerant are flammable and toxic, indirect refrigeration system are more safe to implemented.
Indirect refrigeration system use secondary refrigerant that safe for human and environment. Ice slurry?s are one of the secondary refrigerants that very attractive because their use of latent heat capacity and able to applied on very low temperature. The problem which often occur in making of ice slurry are the tendency of ice to adhere on heat transfer wall so this area will filled with layer that has higher ice concentration than other area, this layer used to called mushy structure. The present of this ice layer will increase the thermal resistant of a system. Usually this mushy structure wipe mechanically using scraper.
The goal of this research focus on making a scraper that can assembly well with an existing auger and study its effect on heat transfer rate and ice packed of the formed ice slurry. Base on measured solution temperature for 200 minute, the calculated average heat transfer rate for auger with scraper increase about 4% in liquid phase and 93% in liquid-ice phase compared with auger without scraper.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S37342
UI - Skripsi Open  Universitas Indonesia Library
cover
Gavin Cakraditya
"Tulisan dan penelitian ini dilakukan untuk melakukan perbandingan performa dari chiller dengan refrigerant R290 saat sebelum dan sesudah menggunakan sub-cooler/heat exchanger. Sehingga dapat memberikan perkiraan seberapa besar dampak penggunaan sub-cooler pada performa chiller. Penelitian ini dilakukan dalam rangka membantu pengembangan pemakaian chiller hidrokarbon di Indonesia, dimana minatnya sudah cukup tinggi dengan sifatnya refrigerant yang ramah lingkungan serta memiliki performa pendinginan yang lebih tinggi dari chiller dengan refrigerant R22 yang saat ini banyak digunakan. Melalui riset ini ditemukan bahwa penggunaan Sub-Cooler memberikan dampak kenaikan performa sebesar 6.9% pada beban pendinginan sedang, namun tidak memberikan perubahan signifikan pada performa saat beban pendinginan rendah.

The purpose of this research is to compare the performance of R290 hidrocarbon Chiller with sub-cooler and without sub-cooler, so that could give an estimation on how significant the impact made by sub-cooler in increasing chiller performance. This research also intended to helps the development of hydrocarbon chiller in Indonesia, which it's environmentally friendly and have higher performance than chiller with R22 as it's refrigerant. By doing this research, it was found that the use of sub-cooler when using it on medium cooling load operation could increase performance by 6.9%, but did not have significant effect in performance when using it on low cooling load operation."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Intan Permata Sari
"Ice Slurry merupakan hasil rekayasa sistem pendingin pada evaporator dengan memanfaatkan air laut sebagai media freezing point depressing additive. Teknologi ice slurry sangat berperan penting dalam proses penangkapan ikan di laut lepas, karena kualitas ikan yang di dinginkan oleh ice slurry jauh lebih baik di bandingkan oleh media pendingin lainya. Modifikasi evaporator dengan lapisan Teflon dan jarak clearance dimaksudkan untuk mengurangi daya dan mempersingkat waktu pembuatan ice slurry. Tujuan dari penelitian ini adalah untuk mencari pengaruh modifikasi evaporator dan menganalisis kinerja dari generator dengan variasi salinitas air laut. Semakin tinggi salinitas air laut maka semakin rendah suhu ice slurry. Tetapi lebih tinggi salinitas belum tentu efisien dari segi daya pembentukan ice slurry yang dibutuhkan untuk mendinginkan ikan, karena hasil tangkapan rata-rata laut perlu suhu pendinginan antara -1 sampai -2 ?. Parameter dalam penelitian ini adalah daya terendah dan waktu tersingkat dalam pembentukan ice slurry. Modifikasi evaporator membuat friksi pada generator menurun sehingga mengurangi kebisingan, menurunkan kebutuhan daya pada generator ice slurry rata ndash; rata sebesar 63 Watt, juga mengurangi waktu pembentukan ice slurry rata ndash; rata sebesar 11 detik.

Ice Slurry is the result of cooling system engineering on the evaporator by utilizing seawater as a freezing point depressing additive medium. Ice slurry technology plays an important role in the process of catching fish in the open seas, because the quality of the fish is cooled by ice slurry is much better in comparison with other cooling media. The evaporator modification with Teflon coating and clearance distance is intended to reduce power and shorten the ice slurry making time. The purpose of this research is to find the effect of evaporator modification and to analyze the performance of generator with salinity variation of seawater. The higher the salinity of sea water the lower the ice slurry temperature. But higher salinity is not necessarily efficient in terms of the ice slurry forming power required to cool the fish, since the average sea catch rate needs a cooling temperature between 1 to 2 . The parameters in this study are the lowest power and the shortest time in ice slurry formation. The evaporator modification causes the friction on the generator to decrease so as to reduce noise, decrease the power requirement on an average ice slurry generator by 63 Watt, also reducing the average ice slurry time by 11 seconds."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S68553
UI - Skripsi Membership  Universitas Indonesia Library
cover
Liberty Trirahmadika Widyakusuma
"Ice slurry merupakan media pendingin yang dihasilkan melalui rekayasa sistem refrigerasi dengan memanfaatkan air laut sebagai bahan dasarnya. Ice slurry sebagai media pendingin merupakan alternatif terbaik untuk mendinginkan ikan, hal tersebut karena seluruh badan ikan dapat tertutupi oleh es berbentuk kristal dengan diameter 0.1-0.2mm dan temperatur dibawah 0 oC. Tujuan dari penelitian ini adalah untuk merancang prototype ice slurry generator dan menganalisis laju produksi dengan membandingkan beberapa variasi salinitas air laut. Parameter dalam penelitian ini adalah laju produksi ice slurry generator hasil rancangan. Laju produksi terbaik ice slurry generator generasi ke-6 pada penelitian ini adalah 0.284 Ton/12 Hours , dihasilkan oleh air laut dengan salinitas 10 ppt dengan putaran 335 RPM pada scraper dan 1064 RPM pada pompa.

Ice slurry is a cooling medium generated through refrigeration system engineering by utilizing sea water as its base material. Ice slurry as a cooling medium is the best alternative for fish cooling and preservation, this is because the whole body of fish can be covered by ice crystals with a diameter of 0.1 0.2 mm and temperatures below 0 oC. The purpose of this research is to design a prototype of ice slurry generator and analyze the production rate by comparing some salinity variation of seawater. The parameter in this research is the production rate of slurry ice generator specially designed for this research. The best production rate of slurry ice generator 6th generation in this research is 0.284 Ton 12 Hours , produced by 10 ppt salinity of seawater with 335 RPM rotation on scraper and 1064 RPM on the pump."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S68291
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fauzano Mohammad
"Struktur es dari ice slurry yang lembut dan dengan kristal berukuran nanometer membuatnya mudah masuk ke sela-sela sisik ikan sehingga dapat mengawetkan ikan dengan lebih optimal, hal ini membuat teknologi ice slurry menjadi teknologi terbaru di industri perikanan yang telah dipakai di negara-negara maju, modifikasi evaporator dengan penambahan clearence antara scraper blade dengan tabung dalam evaporator guna menghilangkan freezing effect ketika terjadi penumpukan es di dining tabung evaporator. Propane digunakan sebagai refrigerant karna dianggap mampu menjadi media pendingin yang baik. Tujuan dari penelitian ini adalah untuk mencari pengaruh modifikasi evaporator dan menganalisis kinerja dari generator dengan variasi salinitas air laut.

Ice structure of soft ice slurry with nanometer sized crystals make it easy to get into the sidelines of fish scales so as to preserve fish more optimally, making ice slurry technology as the latest technology in the fishing industry that has been used in developed countries, Modify the evaporator by adding clearence between the scraper blade and the tube in the evaporator to remove the freezing effect when ice accumulation occurs in the dining tube of the evaporator. Propane is used as a refrigerant because it is considered capable of being a good cooling medium. The purpose of this research is to find the effect of evaporator modification and to analyze the performance of generator with salinity variation of brine."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S67244
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dwitya Harits Waskito
"Penggunaan es balok dalam dunia perikanan di Indonesia sebagai alat untuk pendinginan ikan masih dianggap tidak efektif dikarenakan bersifat keras dan merusak ikan. Selain itu es balok memiliki kemampuan yang rendah untuk mendinginkan ikan dan di beberapa daerah sulit untuk mendapatkan es balok dengan harga terjangkau dan kualitas baik. Salah satu solusi yang ditawarkan adalah penggunaan ice slurry berbahan dasar air laut. Selain mempunyai luas kontak yang baik untuk pendinginan ikan, ice slurry juga dapat meningkatkan kualitas kesegaran ikan. Penelitian ini bertujuan untuk mengamati dan merancang sistem Ice Slurry Generator dengan Scraper Blade Evaporator sebagai tempat pembuat ice slurry yang efisien, cepat, dan biaya operasi yang murah.
Pengujian dilakukan dengan melakukan perhitungan waktu pendinginan ice slurry sampai temperatur terbentuknya ice slurry dengan metode perhitungan luas kontak antara pipa coil refrigeran dengan air laut. Selain itu dilakukan perbandingan antara hasil perhitungan dengan hasil percobaan pendinginan ice slurry dengan variasi volume 7 liter, 9 liter, dan 11 liter. Dan juga dilakukan pengujian variasi putaran motor augershaft pada 57 rpm, 63 rpm, 67 rpm,dan 77 rpm untuk mengetahui pengaruh putaran motor terhadap waktu pendinginan. Hasil yang didapatkan adalah terdapat perbedaan antara hasil perhitungan dan hasil percobaan, dengan perbedaan sebesar 35.77 %. Dan didapatkan juga hasil bahwa semakin cepat putaran motor maka semakin cepat pula waktu pendinginan ice slurry.

The use of a beam ice by a majority of fishermen in Indonesia is still considered to be less effective due to the harsh and destruction to the fish product. In addition that beam ices have a low ability to cool the fish and mantain the fish at good condition for food product. In some province in Indonesia, it is difficult to get a beam ice with reasonable price and good quality. One of proposed solution is the use of ice slurry made from sea water. In addition to having a good contact with fishes, ice slurry can also improve the quality of the freshness of the fish. This study is aimed to observe and design Ice Slurry Generator with Scraper Blade Evaporator Type as a ice slurry maker to provide an ice slurry with a good efficiency, fast, dan inexpensive operating cost.
The experimental is performed by calculating the chilling time of ice slurry untul nucletion temperature with surface area contacts method between refrigerant pipe coil with sea water. Moreover ,this study is comparising between the calculation results with the time actual results with variations of volume 7 litres, 9 litres,and 11 litres. And also variating the augershaft motor rotation at 57 rpm, 63 rpm, 67 rpm, 77 rpm, to determine the effect of motor rotation to the chilling time. Ther results obatained that there are the differences between the calculation and the experimental results, with a difference of 35.77% and also obtained the result that faster rotation of motor make the chilling time of ice slurry become faster.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52915
UI - Skripsi Membership  Universitas Indonesia Library
cover
cover
Dani Arsanto
Depok: Fakultas Teknik Universitas Indonesia, 2001
S37091
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>