Hasil Pencarian  ::  Simpan CSV :: Kembali

"The Trends conference attracts the world?s leading welding researchers. Topics covered in this volume include friction stir welding, sensing, control and automation, microstructure and properties, welding processes, procedures and consumables, weldability, modeling, phase transformations, residual stress and distortion, physical processes in welding, and properties and structural integrity of weldments."

"The many papers presented in this volume present an integrated approach to welding disciplines. Discussion included the basic sciences of physics, chemistry, and mathematics, along with computer science and mechanical and electrical engineering. Features extensive coverage of friction stir welding technology advances."

"Contents :- Recent Developments in the Understanding of Stainless Steel Welding Metallurgy - Tailoring the Phase Balance During Laser and GTA Keyhole Welding of SAF 2205 Duplex Stainless Steel - Pitting Corrosion Resistance of Duplex Stainless Steels Multipass Welds - Investigation of the Kinetics of the Ferrite/Austenite Phase Transformation in the HAZ of a 2205 Duplex Stainless Steel Weldment - Effect of GTAW Flux on the Microstructure and Properties of Austenitic, Super Austenitic and Super Duplex Stainless Steel Welds - COlumnar-to-Equiaxed Transition During Solidification of Steel Welds - Analysis of Autogenous Gas Tungsten Arc and Laser Welding of Superaustenitic Stainless Steels for Naval Combatant Hulls - Laser Welding of Superaustenitic Stainless Steel - Prediction of Solidification Mode and Hot Cracking Susceptibility in Laser Welds of High Nitrogen Stainless Steels - HAZ Properties of High Nitrogen Austenitic Stainless Steel - Ductility-Dip Cracking Susceptibility of Austenitic Alloys - Fatigue Crack Propagation of Stainless Steel Welds - Hot Cracking Resistance of Laser and Hybrid Welded Austenitic Stainless Steels - Improved Models for Predicting Ferrite Content in Stainless Steel Welds - Progress in Joining Austenitic Stainless Steels by Friction Stir Welding - Effect of Twin-Induced Grain Boundary Engineering on Intergranular Corrosion in Austenitic Stainless Steel - Effect of CTE on Fatigue Cracking of Stainless Steel Vessels - Recent Developments in Transport Phenomena in Fusion Welding - Laser Weld Keyhole Dynamics - Computer Modeling of Keyhole Mode Laser Welding to Avoid Macro-porosity - Dimensionless Relationships for the Keyhole Weld Characteristics in AZ80 Magnesium Alloy - Numerical Modeling of Stationary GTA Welding - Validation of Computed Weld Pool Temperature Profiles for GTA Welding of Gamma TiAl - Anode Heat Transfer in GTA Welding - A k-E Model for Turbulent Weld Pool Convection in Gas Metal Arc Welding Process - Analysis of Friction Stir Weld Using the Inverse-Problem Approach - Phase Distribution and Transformation Dynamics in Fusion Welds Using In-situ Synchrotron Diffraction Methods - Advanced Characterization Techniques for Weld Microstructures - Nonequilibrium solidification in Fe-C-Al-Mn steel welds - Mapping Phase Transformations in the Heat-Affected-Zone of Carbon Manganese Steel Welds Using Spatially Resolved X-Ray Diffraction - Modeling of Ferrite to Austenite Transformation and Real Time Mapping of Phases During GTA Welding of 1005 Steel - Magnetic Force Microscopy as a Tool for Weld Metal Studies - Characterization of Delta Ferrite Content in GTAW Deposited Stainless Steel Cladding - Grain Growth in the Heat-Affected Zone of Ti-6Al-4V Welds: Measurements and Three Dimensional Monte Carlo Simulation - Friction Stir Welding Developments - A Detailed Three-Dimensional Transient Heat Transfer Model For Friction Stir Welding - Input Torque Based Thermal Model of Friction Stir Welding of Al-6061 - High-Speed Video Flow Visualization in Friction Stir Welds of Polycarbonate - Visualization of Material Flow During Friction Stir Welding (FSW) of the Same and Dissimilar Aluminum Alloys - Force Sensing in Friction Stir Welding - Microstructural Analysis and Modeling of the Heat Affected Zone in Al 2519 Friction Stir Welds - Thermo-Mechanicat Anatyses of Wetding Atuminium Alloy with TIG and Friction Stir Welding - Residual Stress Distributions in Friction Stir Welded Al Sheets Determined by Neutron Strain Scanning - Effect of Pin Tool Shape on Metal Flow During Friction Stir Welding - Reproduction of Ultra-Fine Grains in Equal Channel Angular Pressed Al Alloy by Friction Stir Process - Improvement of Mechanical Properties in Thixomolded Mg Alloy AZ91D by Friction Stir Welding - The Evaluation of the Mechanical Properties of AA5083 Friction Stir Welds by Electronic Speckle Pattern Interferometry - Investigating Post-Weld Heat Treatments to Increase the Corrosion and the Environmental Cracking Behavior of 7075-T6 Friction Stir Weld - Pitting Corrosion Behavior of Friction Stir Welded 7050-T74 Aluminum Alloy - The Effect of the Welding Conditions on the Nugget Zone in Friction Stir Welds in an AA7010 Alloy - Metallurgical Characterization of Friction Stir Welded 7050-T74 and C458-T3 Aluminum Alloys - Weld Efficiency and Defect Formation: Correlation Between Experiment and Simple Models - Low Plasticity Burnishing of Friction Stir Welds in 2219 Aluminum to Increase Corrosion Fatigue Life - Mechanical Property and Microstructural Evaluation of Friction Stir Welded AL- 6XN - Post-Weld Aging of Friction Stir Wel"

"This book constitutes the refereed proceedings of the 8th International Conference on Data Integration in the Life Sciences, DILS 2012, held in College Park, MD, USA, on June 28-29, 2012. The 11 revised papers included in this volume were carefully reviewed and selected. The papers cover the following topics, foundations of data integration, new paradigms for data integration, and integrating clinical data"

"This book constitutes the refereed proceedings of the 8th International Conference on Rough Sets and Current Trends in Computing, RSCTC, held in Chengdu, China, in August 2012, as one of the co-located conferences of the 2012 Joint Rough Set Symposium, JRS 2012. The 55 revised full papers presented together with one keynote paper were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on rough sets and its applications, current trends in computing, decision-theoretic rough set model and applications, formal concept analysis and granular computing, mining complex data with granular computing, and data mining competition."

"This book contains the refereed proceedings of the Third International Conference on Software Business (ICSOB) held in Cambridge, MA, USA, in June 2012. The software business refers to commercial activities in the software industry, aimed at generating revenues from the design, delivery, and maintenance of software products and IT services to enterprises and individual customers, as well as from digital content. Although this business shares common features with other knowledge-intensive markets, it carries many inherent features making it a challenging domain for research. The 20 full and 10 short papers accepted for ICSOB were selected from 60 submissions and are organized in sections on software product management, organizational transformation, industry transformation, software platforms and ecosystems, and emerging trends."

"This book constitutes the thoroughly refereed post-conference proceedings of the 8th International Conference on Large-Scale Scientific Computations, LSSC 2011, held in Sozopol, Bulgaria, in June 2011. The 74 revised full papers presented together with 3 plenary and invited papers were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on robust multigrid, multilevel and multiscale, deterministic and stochastic methods for modeling highly heterogeneous media, advanced methods for transport, control and uncertain systems, applications of metaheuristics to large-scale problems, environmental modelling, large scale computing on many-core architectures, multiscale industrial, enviromental and biomedical problems, efficient algorithms of computational geometry, high performance Monte Carlo simulations, voxel based computations and contributed papers."

"This book contains thoroughly refereed and revised papers from the 8th International Andrei Ershov Memorial Conference on Perspectives of System Informatics, PSI 2011, held in Akademgorodok, Novosibirsk, Russia, in June/July 2011. The 18 revised full papers and 10 revised short papers presented were carefully reviewed and selected from 60 submissions. The volume also contains 5 invited papers covering a range of hot topics in computer science and informatics. The papers are organized in topical sections on foundations of program and system development and analysis, partial evaluation, mixed computation, abstract interpretation, compiler construction, computer models and algorithms for bioinformatics, programming methodology and software engineering, information technologies, knowledge-based systems, and knowledge engineering."