Hasil Pencarian  ::  Simpan CSV :: Kembali

"Contents :- Fifteenth International Conference on Surface Modification Technologies Indianapolis, Indiana November 5-8, 2001 - Foreword - Technical Sessions - The PROTAL Process: An Economical Alternative for Producing a Clean Interface in a Thermal Spraying Application - Application of In-Process Reaction to the Fabrication of MgAl2O2/Al-Si Composite Coating by HVOF Spraying - Finite Element Modeling of Coating Architectures for Aluminum Die Casting - Synthesis of Superlow Friction Carbon Films from Hydrogen Rich Acetylene Plasmas - Use of Advanced Soft-Metal Engineered Surfaces to Control Galling of Carbon Steel Bolts in Gasketed Joints at Elevated Temperatures - Fabrication and Characterization of TiB2/TiC and Tungsten Co-Sputtered Wear Resistant Coatings - Structure and Mechanical Properties of Magnetron Sputtered Coatings in the Ni- Al-N Ternary System - Correlation of Nitrogen Gas Processing Level to Structural and Tribological Properties of MoS2/Ti/N Solid Lubricated Coatings - Analysis of Composite Surfaces with the Atomic Force Microscope: A Problem Solving Approach - Characterization of Industrial Coatings with Atomic Force Microscopy - Study by Atomic Force Microscopy: Effect of the Doping Anion on the Surface Morphology of Polypyrrole Films - Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM): Complementary Techniques for High Resolution Surface Investigations - Electrodeposition of Polypyrrole on Aluminum Alloy - New Technology in Atomic Force Microscopy (AFM) for Faster Scanning Speeds and Shorter Time-to-Result - Formation of Bilayer Polypyrrole-Polyaniline Composite Coating for Corrosion Protection of Steel - Corrosion Protection of Al 2024-T3 by Particulate Filled Conducting Polymer Coatings - Experimental Determination of Interactions Between Molten Aluminum and Selected Die Coatings for Aluminum Pressure Die Casting - Laser Peening: Current Status and Future Outlook - Iron Aluminide Based Coating Deposited by High Energy Density Processes - Interfacial Adhesion of Laser Clad Functionally Graded Materials - Stability and Oxidation Resistance of Novel Metallic Fibers - Controlled Superficial Cracking of the Substrate to Enhance Adhesion of Plasma Sprayed Coatings - Residual Stresses in MoN and Mo2N Coatings Deposited by Arc PVD on High Speed Steel Substrate - A Study of Grain Boundary Precipitation During Plasma Nitriding of Steel - Overview of Alternative Technologies for Chromium and Cadmium - Role of Electroplated Chromium on the Corrosion Resistance of Decorative Thin Film Coatings - Eco-Friendly Chromium and Cadmium Dry Plating - Evaluation of Aluminum-Manganese as a Cadmium Replacement - Zinc-Tin: A Versatile Alternative to Cadmium for Brush Plating Applications - Hardening of Metallic Surfaces by Diffusion Processes (with and without Reaction) - Vitroceramic Oxidic Systems as Coatings on Pure Titanium (Biomedical Substrates) - Modification of Oxide Thermal Barrier Coatings Deposited on a Superalloy by Laser-Beam Radiation - Subject Index - Author Index "

"Contents :

• Foreword
• Surface Modifications in Aerospace Applications
• In Situ Formation of Titanium Carbide by Reactive Plasma Spraying with Elemental Titanium Powder
• A Comparative Study of Mechanical Properties and Residual Stress Distributions of Copper Coatings Obtained by Different Thermal Spray Processes
• Damage Progression in Thermal Barrier Coatings During Four-Point Bend Tests with Acoustic Emission Monitor
• A Study of the Strength of Spray Coated Layer by Cross Sectional Electron Microscopy
• A Comparative Study of Different Plasma Sprayed Coatings Applied to Railway Disc Brakes
• Optimization and Monitoring of the Production of Thermal Barrier Coatings
• Benefits of Surface Preparation by Laser for Thermal Sprayed Coatings
• Fabrication of Ti02 Photocatalytic Coating by Thermal Spray Process
• Indentation Fracture Toughness and Interfacial Indentation Tests Associated with Acoustic Emission on WC-Co Coated Specimens
• Fatigue Processes in Bodies with Surface Coatings
• Laboratory Evaluation of Hot Erosion Resistance of Six Thermal Sprayed Coatings
• Vacuum Plasma Sprayed WC-12% Co Coatings: Optimization of Spraying Parameters and Subsequent Laser Treatment
• Optical Properties of Al Film Deposited on Polymer
• Slurry and Thermal Spray Coatings for Protection of New Generation Steam Engine Components
• Surface State Modifications in Powder Products Induced by a Spray-Coating Technique
• Relationship Between Dilution and Solidification Cracking in PTAW Ni-Base Superalloy Overlays
• A Novel Friction Thermomechanical Process for Surface Modification of Aluminum Castings
• Characterization and Modelling of Multilayer Ti-Based Coating
• Electrolytic Deposits on Stainless Steel as High Temperature Coatings
• Investigation of Ceramic Sol-Gel Thin Films for Wet Corrosion Protection of Mild Steel
• Need for Environmentally Friendly Surface Modification Technology in the Japanese Automotive Industry
• Development of Bioceramic Composites: Processing Solutions and In-Vitro Evaluations
• Wear of Ultra High Molecular Weight Polyethylene Sliding Against a CoCrMo Coating Applied by Physical Vapor Deposition
• Physico-Chemical and Mechanical Approaches to the Dentin-Resin Adhesive Interface
• Surface Quality of Master Screw Dental Implant
• Suspension Plasma Sprayed Hydroxyapatite Nano-Powder for Biomedical Application
• Ceramographic Analysis of Ceramo-Metal Bonding Interfaces
• A Nanoindentation Study of PVD WC/C Coatings Supported by Cross-Sectional Electron Microscopy Observations
• Effect of a Ni Interlayer on the Corrosion Behavior of CrN PVD Coating Deposited onto Plastic Mold Steels
• Structure of Diamond-Like Carbon Films Obtained by PECVD: XPS, X-Rays Reflectometry and Hardness Measurements
• Application of Surface Modified Silica Thin Films to Biosensors
• Surface Treatments and Coatings in the Steel-Making Industry: From Metallurgy to Processing
• Changes in Structure and Properties of AIN Thin Films Due to Surface Oxidation
• Carbo-Nitride Thin Films and Nanofibers Synthesized by HF-CVD
• Effect of Various Plasma Nitriding Procedures on Surface Characteristics of P/M Ledeburitic Tool Steels
• Characterization of PVD Ni Coatings Deposited at Various Conditions
• Challenges and Opportunities in Surface Engineering
• Correlations Between Surface Modification and Tribological Performance of Brake Pads
• Development of Novel Fe-Cr-C/NbC Composite Materials for Wear Resistant Coatings Using a Laser Rapid-Alloy-Prototyping Technique
• Dose Rate Influence on the Microstructure of Chromium Steels Subjected to Low-Energy Nitrogen Ion Implantation
• Effect of Coatings on Mechanical Properties and Fretting Fatigue Strength of a Titanium Alloy in Cryotechnical Environment
• Wear Behavior of Colored Stainless Steel
• Wear Analysis of Coated Carbide Tools when Machining Nickel Base, Inconel, Alloy
• Wear Modelling of Contact Plan/Plan Between Graphite and Titanium Alloy
• Wear Criterion for Cold Forging Tool
• Surface Modification of a FeCrAlY-Alloy by Ion Implantation and Oxidation for Potential Implant Applications
• Functionally Graded Materials Produced by Laser Cladding: A Novel Approach
• Improvement of Adhesive Properties of Polymers After Excimer Laser Irradiation
• Properties and Applications of Coatings Deposited by Laser Beam
• WC-Co Plasma Sprayed Coatings Partially Re-fused with Laser
• Modeling of Temperature Fields in Graphite Target at Pulsed Laser Deposition of CNx Films
• Laser Treatment of BN Pre-Coated Steels: Correlation of Hardness and Microstructure
• Surface Alloying of Ceramic Powders on F

"

"For engineers and researchers involved in the development and application of surface modification technologies, this international conference provide some of the latest advancements in coatings and surface treatments for practical application of Corrosion Resistant Coatings (3 papers); Wear Resistant Coatings (8 papers); Processing of Materials (5 papers); Plasma Thermal Spraying (4 papers)."

"Provides the latest knowledge and information on scientific advances, techniques, innovations, and commercial practice in heat treating.Sixty-six papers from the November 2001 conference in Indianapolis represent the current status of heat treatment technology. Particular attention is given to atmospheric research, brazing technology, equipment design and energy minimization, microstructure evolution, induction process technologies, etc."

"Contents :- A Heat Treatment Information Tool for the Internet - Proper Selection of Annealing Atmospheres for Electrical Steels - An Introduction to Atmosphere Furnace Safety - Temperature Influence on the Flammability Limits of Heat Treating Atmospheres - Furnace Control Systems and Components to Improve Throughput and Reduce Cost - Process Characterization of Furnace Brazing Through Statistically Designed Computer Simulations* - New Method of Heat Treatment Using the Wave Technology - State of the Art Integrated Heat Treatment Cell for Today's Manufacturing Environment - Why Use Composite Radiant Tubes? - The Heat Treating Global Challenge Heat Treatment Technology Today and for Future - The Top Ten Ways To Keep Your New or Used Carburizing and Hardening Equipment Operating at Maximum Performance and Efficiency - Determining and Improving the Uncertainty of Rockwell Hardness Tests - A new method of reducing NOx emissions from Heat Treatment Furnaces - Taking Control of Your Combustion System - 22ND ASM Heat Treat Conference 2003 George Pfaffmann Honorary Symposium: Induction Heat Treating, What Is Important to Remember - Chemistry of Quenching Part 3– Energy Conservation By Utilization of the Thermal Content of Steel for Surface Modification - Induction as a Source of Heat - Finite Element Analysis of Induction Hardening Process of Steel - Using Numerical Simulations to Determine the Effect of External Fluid Flow on Heat Transfer Rates in Heat Treating Operations - Process Monitoring to Reduce/Eliminate Destructive Testing in Induction Heat Treating. - A Computer Aided Heat Treatment Planning System - Optimization of an Aluminum Alloy Quenching Process in Polyalkylene Glycol Polymer Solution using Taguchi Method - Chemistry of Quenching Part I – Fundamental Interfacial Chemical Processes Involved in Quenching - Critical Heat-Flux Densities, Quenching Intensity and Heat Extraction Dynamics During Quenching in Vaporizable Liquids - Chemistry of Quenching Part 2– Fundamental Thermophysical Processes Involved in Quenching - Application of Intensive Quenching Processes for Carburized Parts - Quench Rate Effects on the Natural Aging Behavior of 7XXX Al-Mg-Zn-Cu Aluminum Alloys - The QuenchMiner™ Expert System for Quenching and Distortion Control - Effect of Quenching Variables on Distortion and Residual Stresses - Influence of Test Conditions on the Cooling Curve Response of Polymer Quenchants (Tensi Agitation Device) - The Effects of Carbon Profile and Quenching Condition on Dimensional Change of Carburized Steel Rings - Advances in Quenching- A Discussion of Present and Future Technologies - Low Pressure Vacuum Carburizing and Accelerated Gas Carburizing - Thermochemical Treatments with Added Corrosion Protection and Wear Protection - Kolsterising – Improving Austenitic Stainless Steel - Status of Chromate Metal Pretreatment Replacement Research at the University of Cincinnati - Nitreg & ONC Where Corrosion Resistance & Wear Requirements Finally Meet - Applications of Vacuum Tempering - Diamond Coated Cutting Tools for Biomedical Applications - FineCarb - the Smart System for Vacuum Carburizing - Laser Micromachining of Stainless Steels for Biomedical Applications - Improved Corrosion Protection of Aluminum Alloys by Electrodeposited Silanes - Atomic Force Microscopy Study of Biaxially-Oriented Polypropylene Films - Characterization of a Chromium-Manganese(16CrMn5)Steel Carburized and Hardened in Different Quenchants - Corrosion Resistance Properties of Ormosil Coatings on 2024-T3 Aluminum - Mechanical Properties of Electroformed Nickel Cobalt Alloys - Utilisation of Fly Ash to Develop Hot Corrosion and Wear Resistant Coatings - Effect of Superficially applied Oxides on the Hot Corrosion behaviour of Feand Ni- base Superalloys in Na2SO4-60%V2O5 - Electrochemical Planarization of Patterned Copper Films for Microelectronic Applications - Environmentally Assisted Fatigue Crack Growth Rate Testing with Corrosion Prevention Compounds - Corrosion Resistant Films from Trivalent Chrome Based Solutions Applied to Electrodeposited Zinc and Zinc Alloys. - Electrodeposition and structural investigation of Antimony Telluride phases - Novel, Water-Based High-Performance Primers that can Replace Metal Pretreatments and Chromate-Containing Primers - Infrared Heat Treatment of Ti-6Al-4V with Electroplated Cu - Preparation of Cu Coatings on the Surface of Acrylonitrile-Butadiene- Styrene (ABS) by Sputter Deposition and Electroless Plating - Plasma Alloying and Spheroidization "

"Nanoporous polyethersulfone (PES) membrane is widely used as a filtration membrane in hemodialysis systems. Unfortunately, it has low blood compatibility, and induces blood clots that adhere to the membrane’s surface during dialysis treatment. This paper reports on a review of surface modification that is used to improve the PES membrane’s blood compatibility. The method consists of applying two coating materials, in the form of parylene and fluorinated diamond-like carbon (F-DLC) films, onto the membrane’s surface. The parylene film is deposited on the diffusion layer of the membrane surface using glycerin liquid, while the F-DLC film is specially coated on the supporting layer of the membrane. The unique property of parylene, which has the characteristics of conformal coating, prevents the parylene from being coated on the supporting layer of the membrane. Conversely, F-DLC film, which is hard, fragile and has a less conformal coating than parylene, is only meant to be coated on the supporting layer. Finally, the coated membranes, along with the bare PES membrane, are compared and investigated under a long-term diffusion test to assess their permeability and blood compatibility. The experiment results show that both coating materials have the capacity to improve the membrane’s blood compatibility in different ways."

"Contents :- Thermal residual stress relaxation and distortion in surface enhanced gasturbine engine components - Development of machining procedures to minimize distortion during manufacture - Control of distortion by quenching in fluidised beds - Optimization of single part quenching in nozzle fields - Hardening of steel parts using wave technology - Continuous vacuum carburizing furnace with 20 bar high-pressure gas quenching - New carburizing techniques using fluidized bed furnaces - The experience at dana corporation, spicer transmission division - Progress in the application of high pressure gas quenching - Atmosphere control system to achieve consistent carburizing in batch furnaces - MSSR (Military Specification and Standards Reform) how does it affect your operation? - Advanced radiant tubes: payback calculations of furnace retrofits - Cost justification in the selection of heat resistant alloys - Principles of airlessTM solvent degreasing - Principles and use of dissociated ammonia - Principles and use of endothermic atmosphere - Supervisory control systems for vacuum furnaces - Supervisory and process control to enhance batch vacuum processing - Brite heat treating in a fluidized bed - Heat treating in fluidized bed furnaces in cutting tool manufacturing treaters - Gas-fired ion nitriding furnace lowers utility costs for commercial heat treaters - Techniques for distortion control during vacuum oil quenching of high strength steel aircraft components...."

"This book constitutes the refereed proceedings of the Third International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2012, held in Tsukuba, Japan, in November 2012. The 33 revised full papers and presented together with 3 invited talks were carefully reviewed and selected from 46 submissions. Ten papers describe design of complex behaviors of autonomous robots, 9 address software layers, 8 papers refer to related modeling and learning. The papers are organized in topical sections on mobile robots, software modeling and architecture and humanoid and biped robots."

"This volume contains papers from the Fourth KES International Symposium on Intelligent Decision Technologies (KES IDT?12), hosted by researchers in Nagoya University and other institutions in Japan. This book contains chapters based on papers selected from a large number of submissions for consideration for the conference from the international community. The volume represents the current leading thought in intelligent decision technologies."