Hasil Pencarian  ::  Simpan CSV :: Kembali

"Polipropilena (PP) adalah polimer termoplastik yang digunakan dalam berbagai aplikasi. Proses kristalisasi adalah proses yang memiliki peranan penting dalam produksi PP. Penambahan nucleating agent yang berfungsi mempersingkat waktu induksi kristalisasi polimer tertentu, termasuk PP. Tujuan dari penelitian ini untuk menganalisis pengaruh penambahan microcrystalline cellulose (MCC) dan microfibrillated cellulose (MFC) sebagai aditif nucleating agent pada proses kristalisasi PP dan memperoleh persentase optimum yang dibandingkan terhadap Hyperform HPN-20E (HPN) sebagai nucleating agent komersial dan PP murni. MFC dibuat dengan alkalisasi, bleaching dan hidrolisis. MFC dan MCC dikarakterisasi dengan SEM dan XRD. Masing-masing dari MFC, MCC dan HPN dilakukan internal mixing dengan PP pwd dengan konsentrasi 0,10; 0,20; 0,40; 1,00 dan 2,00 phr untuk selanjutnya diwakili dengan penomoran 1, 2, 3, 4 dan 5 dan PP pwd untuk blangko. Sampel masterbatch MFC, MCC, HPN dan PP dilakukan karakterisasi dengan uji FTIR, XRD, DSC dan Tarik. Hasilnya menunjukkan bahwa MCC dan MFC dapat meningkat derajat kristalinitas, suhu leleh, suhu kristalisasi dan kekuatan tarik polimer PP walaupun belum menyamai kinerja dari HPN. Persentase optimum masterbatch PP+MFC5 dan PP+MCC4 dengan peningkatan derajat kristalinitas masing-masing sebesar 19,96% dan 18,24% terhadap PP murni. Namun, belum dapat menyamai kinerja HPN pada kondisi optimum masterbatch PP+HPN5 dengan peningkatan derajat kristalinitas sebesar 54,80%. Persentase optimum masterbatch PP+MFC5 dan PP+MCC5 pada peningkatan suhu leleh masing-masing sebesar 2,8°C dan 3,3°C terhadap PP murni. Namun, belum dapat menyamai kinerja HPN pada kondisi optimum masterbatch PP+HPN2 dan masterbatch PP+HPN3 dengan peningkatan suhu leleh yang sama yaitu sebesar 4,4°C. Persentase optimum masterbatch PP+MFC4, PP+MFC5 dan PP+MCC5 pada peningkatan suhu kristalisasi masing-masing sebesar 5,0°C, 5,0°C dan 5,7°C terhadap PP murni. Namun, belum dapat menyamai kinerja HPN pada kondisi optimum masterbatch PP+HPN5 dengan peningkatan suhu kristalisasi sebesar 19,0°C.

---

Polypropylene (PP) is a thermoplastic polymer used in a variety of applications. Crystallization process is a process that has an important role in PP production. The addition of a nucleating agent that serves to shorten the crystallization induction time of certain polymers, including PP. The purpose of this study was to analyze the effect of adding microcrystalline cellulose (MCC) and microfibrillated cellulose (MFC) as nucleating agent additives to the PP crystallization process and to obtain the optimum percentage compared to Hyperform HPN-20E (HPN) as commercial nucleating agent and Pure PP. MFC is made by alkalization, bleaching and hydrolysis. MFC and MCC were characterized by SEM and XRD. Each of the MFC, MCC and HPN were internally mixed with PP pwd with a concentration of 0.10; 0.20; 0.40; 1.00 and 2.00 phr are then represented by numbering 1, 2, 3, 4 and 5 and PP pwd for blanks. The MFC, MCC, HPN and PP masterbatch samples were characterized by FTIR, XRD, DSC and Tensile tests. The results show that MCC and MFC can increase the degree of crystallinity, melting temperature, crystallization temperature and tensile strength of PP polymer although they cannot match the performance of HPN. The optimum percentages of PP+MFC5 and PP+MCC4 masterbatches with increasing degree of crystallinity were 19.96% and 18.24%, respectively, compared to pure PP. However, it has not been able to match the performance of HPN under the optimum conditions of the PP+HPN5 masterbatch with an increase in the degree of crystallinity of 54.80%. The optimum percentages of PP+MFC5 and PP+MCC5 masterbatches at increasing melting temperatures were 2.8°C and 3.3°C, respectively, for pure PP. However, it has not been able to match the performance of HPN under the optimum conditions of the PP+HPN2 masterbatch and PP+HPN3 masterbatch with the same increase in melting temperature of 4.4°C. The optimum percentages of PP+MFC4, PP+MFC5 and PP+MCC5 masterbatches at increasing crystallization temperature were 5.0°C, 5.0°C and 5.7°C for pure PP, respectively. However, it has not been able to match the performance of HPN under the optimum conditions of the PP+HPN5 masterbatch with an increase in crystallization temperature of 19.0°C."

"[Pada penelitian ini, serat ijuk dihancurkan dan diayak ukuran 40 # setelah itu serat ijuk diberi perlakuan kimia dengan NaOH 2 % selama 1 jam, KMnO4 0,1 N selama 15 menit, dan NaClO 5 % selama 5 jam dengan tujuan mendapatkan selulosa kristalin. Setelah itu dilakukan proses pencampuran kering (hotmelt mixing) antara polipropilen dengan serat ijuk hasil perlakuan kimia dengan 7,5 % volum serat ijuk terhadap polipropilen dengan variabel temperatur 160°C, 165°C, dan 170°C dan variabel waktu pencampuran 15 menit dan 20 menit. Setelah itu dilakukan pengujian uji FTIR buat serat, sedangan buat komposit adalah uji tarik, uji STA, uji XRD, dan uji FE-SEM hal ini dilakukan untuk mendapatkan sifat kristalinitas dan mekanik dari komposit polipropilen ini. Hasil penelitian menunjukkan bahwa serat ijuk hasil perlakuaan lebih kristalin dari pada serat ijuk tanpa perlakukan, polipropilen dengan serat ijuk hasil perlakuaan kimia cukup kompatibel terhadap polipropilen, dari penelitian didapatkan sifat kristalinitas terbaik pada variabel 165°C selama 20 menit. Dan yang memiliki sifat kekuatan tarik paling baik adalah variabel 170°C selama 20 menit, sedangkan yang memiliki % elongasi paling baik adalah dengan variabel 160°C 20 menit.

---

In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes.;In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes.;In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes.;In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes.;In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes., In this work, palm fiber crushed and sieved size 40 # after the palm fiber chemically treated with 2% NaOH for 1 hour, 0.1 N KMnO4 for 15 minutes, and 5% NaClO for 5 hours in order to obtain crystalline cellulose. Once that is done the dry mixing (hotmelt mixing) between polypropylene and palm fiber chemical treatment results with 7.5% volume of the palm fiber and polypropylene with a variable temperature of 160°C, 165°C and 170°C and a variable time mixing 15 minutes and 20 minutes. After it was examined FTIR test for fiber, while the composite is made tensile test, STA test, XRD test and FE-SEM test this is done to obtain crystallinity and mechanical properties of polypropylene composites this. The results show that fiber perlakuaan results more crystalline fibers than untreated palm fiber, polypropylene and palm fiber chemistry results treatment compatible enough to polypropylene, crystallinity of the research showed the best properties on the variable 165 ° C for 20 minutes. And who has the most excellent tensile strength properties are variable 170 ° C for 20 minutes, while the best of % elongation is at a variable 160 ° C 20 minutes.]"

"Wood Polymer Composite (WPCs) adalah material komposit yang terdiri atas polimer sebagai matriks dan kayu sebagai bahan penguat (reinforcement). WPCs terus menerus dikembangkan dan disempurnakan sifat-sifatnya sebagai building material sehingga dapat dijadikan material alternatif pengganti kayu.Peneltian ini bertujuan untuk mempelajari pengaruh ukuran bahan pengisi terhadap karakterikstik komposit polipropilena serbuk kayu. Material yang digunakan adalah resin polipropilena dan serbuk kayu karet yang masingmasing bertindak sebagai matriks dan bahan pengisi, dan PPMA (Polipropilena Maleat Anhidrat) sebagai coupling agent. Ukuran serbuk kayu yang digunakan adalah tanpa bahan pengisi, 1410 µm, 100 µm, 365 µm, 250 µm. Proses pembuatan WPCs menggunakan metode palletizing dan injecton molding dengan temperatur sebesar 190°C. Komposit yang dihasilkan diuji untuk menegetahui nilai MFR (Melt Flow Rate), sifat termal (temperatur leleh dan temperatur kristalisasi) sifat mekanis (tensile strength at yield, fleksural, izod impact energy dan kekerasan).Hasil penelitian menunjukkan semakin kecil ukuran bahan pengisi maka MFR, temperatur melting, temperatur kristalisasi, tensile strength at yield, fleksural, dan kekerasan semakin meningkat. Sebaliknya, cenderung terjadi penurunan nilai izod impact energy dengan semakin kecilnya ukuran bahan pengisi.

---

Wood Polymer Composite (WPCs) is consisted of two elements that different in nature, polymer as matrix and wood as filler (reinforcement). WPCs have been continually improved in order to get better properties as building material and alternative wood substitute.

The aim is to study the effect of filler size on characteristics WPCs. Resin polypropylene and rubber wood powder are used in this research as a matrix and filler respectively, and PPMA (Polypropylene Maleate Anhydrate is also used as a coupling agent. Filler size that used in this study are without filler, 1410 µm, 100 µm, 365 µm, 250 µm. The process of making PCs through palletizing and injection molding method at temperature 190°C. Then, the composite products are analyzed in order to know the effect properties of this composite such as MFR (Melt Flow rate), thermal properties (melting temperature and crystallization temperature), mechanical properties (tensile strength at yield, flexural, izod impact energy and hardness), fracture type and chemical composition.

The result shows that MFR (Melt Flow rate), thermal properties (melting temperature and crystallization temperature) and mechanical properties (tensile strength at yield, flexural, izod impact energy and hardness) have a tendency to increase as decreasing of filler size. In the other hand, izod impact energy decreased."

"[Polipropilena (PP) kopolimer impak merupakan salah satu jenis PP yangcukup banyak digunakan. PP kopolimer impak dibuat dengan penambahan etilena yang mengakibatkan penurunan kristalinitas PP. Usaha yang dilakukan untuk memperbaiki sifat kristalinitas PP yaitu dengan menambahkan agen nukleasi. Pada penelitian ini PP ditambahkan agen nukleasi serat ijuk yang mendapatkan perlakuan alkali, dilanjutkan dengan oksidasi menggunakan katalis yang bertujuan untuk mempercepat waktu kristalisasi PP. Serat ijuk ditambahkan sebanyak 10% volum. Morfologi, kandungan kimia dan kristalinitas serat ijuk dikarakterisasi dengan menggunakan FESEM (Field Emission Scanning Electron Microscope), FTIR (Fourier Transmission Infra Red), XRD (X-Ray Diffraction). Terbukti bahwa telah terjadi perubahan diameter dan morfologi serat ijuk menjadi mikrofibril setelah perlakuan alkali yang dilanjutkan dengan oksidasi menggunakan katalis. Hal tersebut menunjukkan telah terjadi penggerusan permukaan serat ijuk yaitu dengan menurunnya kadar lignin dan hemiselulosa yang merupakan pengikat antara lignin dan selulosa. Hasil karakterisasi XRD menunjukkan kristalinitas serat ijuk yang tidak diberi perlakuan adalah 42% sedangkan yang mendapat perlakuan NaOH 2% selama 1 jam dilanjutkan oksidasi menggunakan NaClO 5% selama 5 jam dan katalis KMnO4 0,01 N selama 15 menit menunjukkan kristalinitas sebesar 60,75%. Untuk mengerahuiefek serat ijuk sebagai agen nukleasi dilakukan uji DSC (Differential Scanning Calorimetry) pada sampel campuran PP-serat ijuk. Hasil DSC menunjukkan ada perubahan kecepatan kristalisasi PP-serat ijuk yang menunjukkan efek serat ijuk sebagai agen nukleasi. Pada kecepatan pendinginan 10 ° C/menit, PP murni memiliki waktu kristalisasi 1,2 detik, PP-serat tanpa perlakuan memiliki waktu kristalisasi 1 detik sedangkan PP-serat ijuk dengan perlakuan NaOH 2% selama 1 jam dilanjutkan oksidasi menggunakan NaClO 5% selama 5 jam dan katalisKMnO4 0,01 N selama 15 menit memiliki waktu kristalisasi 0,9 detik.;Polypropylene (PP) copolymer impact is one type of PP is quite widely used. PP impact copolymer is made by adding ethylene which resulted in a decrease in crystallinity PP. Efforts are being made to improve the properties of PP crystallinity by adding a nucleating agent. In this study PP nucleating agent added “Ijuk” fibers that get alkali treatment, followed by oxidation using a catalyst which aims to accelerate the crystallization of PP time. “Ijuk” fibers was added as much as 10% volume. Morphology, chemistry and crystallinity of “Ijuk”fibers were characterized by using FESEM (Field Emission Scanning Electron Microscope), FTIR (Fourier Transmission Infra Red), XRD (X-Ray Diffraction). It was proved that there has been a change in fiber diameter and morphology of fibers into microfibrils after alkali treatment followed by oxidation using a catalyst. It showed that there has been annihilation of surface fibers with reduced levels of lignin and hemicellulose which is a binder between lignin and cellulose. XRD characterization result indicated the fiber crystallinity untreated fibers was 42% while with treatment 2% NaOH for 1 hour followed oxidation using NaClO 5% for 5 hours and the catalyst KMnO4 0.01 N for 15 minutes showed crystallinity of 60.75%. To determine “Ijuk” fiber as nucleating agents, the sample of PP-fiber mixture was tested by DSC (Differential Scanning Calorimetry). DSC results showed change in rate of crystallization of PP-fiber fibers that indicate the effects of “Ijuk” fiber as a nucleating agent. In the cooling rate of 10 ° C / min, pure PP has a crystallization time of 1.2 seconds, the PPfibers without treatment had a crystallization time of 1 second while the PP-fiber fibers with 2% NaOH treatment for 1 hour followed oxidation using NaClO 5% for 5 hour and 0.01 N KMnO4 catalyst for 15 minutes had a crystallization time of 0.9 seconds., Polypropylene (PP) copolymer impact is one type of PP is quite widelyused. PP impact copolymer is made by adding ethylene which resulted in adecrease in crystallinity PP. Efforts are being made to improve the properties ofPP crystallinity by adding a nucleating agent. In this study PP nucleating agentadded “Ijuk” fibers that get alkali treatment, followed by oxidation using acatalyst which aims to accelerate the crystallization of PP time. “Ijuk” fibers wasadded as much as 10% volume. Morphology, chemistry and crystallinity of “Ijuk”fibers were characterized by using FESEM (Field Emission Scanning ElectronMicroscope), FTIR (Fourier Transmission Infra Red), XRD (X-Ray Diffraction). Itwas proved that there has been a change in fiber diameter and morphology offibers into microfibrils after alkali treatment followed by oxidation using acatalyst. It showed that there has been annihilation of surface fibers with reducedlevels of lignin and hemicellulose which is a binder between lignin and cellulose.XRD characterization result indicated the fiber crystallinity untreated fibers was42% while with treatment 2% NaOH for 1 hour followed oxidation using NaClO5% for 5 hours and the catalyst KMnO4 0.01 N for 15 minutes showedcrystallinity of 60.75%. To determine “Ijuk” fiber as nucleating agents, thesample of PP-fiber mixture was tested by DSC (Differential ScanningCalorimetry). DSC results showed change in rate of crystallization of PP-fiberfibers that indicate the effects of “Ijuk” fiber as a nucleating agent. In the coolingrate of 10 ° C / min, pure PP has a crystallization time of 1.2 seconds, the PPfiberswithout treatment had a crystallization time of 1 second while the PP-fiberfibers with 2% NaOH treatment for 1 hour followed oxidation using NaClO 5%for 5 hour and 0.01 N KMnO4 catalyst for 15 minutes had a crystallization time of0.9 seconds.]"

"ABSTRAKPenelitian ini fokus pada peningkatan sifat mekanis Polipropilena impak kopolimer (PP) dengan menggunakan serat ijuk yang telah dimodifikasi. Modifikasi serat ijuk dilakukan dengan menggunakan proses alkalinisasi dan pemutihan. Proses tersebut bertujuan untuk meningkatkan kristalinitas dan kompatibilitas serat ijuk terhadap matriks PP. Pembuatan komposit PP-ijuk dilakukan menggunakan metode pencampuran lelehan panas untuk selanjutnya di cetak sesuai spesifikasi sampel uji sifat mekanis. Proses pencampuran dilakukan selama 15 menit dan dipelajari dua variabel utama, yakni variasi kadar serat ijuk (1%, 3%, 5%) dan variasi temperatur pencampuran (160⁰C dan 165⁰C). Komposit yang terbentuk selanjutnya dilakukan pengujian STA dan UTM. Dari hasil percobaan dapat disimpulkan bahwa peningkatan sifat mekanis yang optimal didapatkan pada percobaan menggunakan serat ijuk 1% dan suhu pencampuran 160⁰C. pada sampel tersebut teramati penambahan nilai kuat tarik hampir mencapai 1 Mpa. Hasil percobaan mengindikasikan bahwa serat ijuk hasil modifikasi dapat digunakan sebagai filler untuk meningkatkan sifat mekanis PP. Kondisi utama yang paling mempengaruhi peran positif serat ijuk adalah distribusi dan dispersi.

---

ABSTRACTThis research focused on the employment of modificated ?ijuk? fibers as fillers to improve the mechanical properties of polypropylene impact copolymer (PP). Ijuk fibers are processed through alkali treatment and bleaching. Those processes are intended to improve the crystalinity and compatibility of ?ijuk? fibers to matrix PP. Afterwards, PP-ijuk composite is made by using rheomixing and subsequently casted in satisfactory to meet the requirements as standard sample for tensile strength testing. Rheomixing was conducted for 15 minutes in different concentration of ?ijuk? fibers (1%, 3%, 5%) and temperature (160⁰C dan 165⁰C). STA and UTM were used to observe the properties of the composite. From the results, can be concluded that the optimal condition to improve the mechanical properties of PP is obtained in the condition of 1% ?ijuk? fibers and 160⁰C mixing temperature. These condition were successfully improved the tensile strength of PP by 1 Mpa. The experiments indicated that modificated ?ijuk? fibers can be used as filler to increase the mechanical properties of PP. Distribution and dispertion were attributed as the main factors which influenced the processes."