Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 167 dokumen yang sesuai dengan query
cover
Bailey, Edward C.
Indianapolis: Ind Redhat Press, 1997
005.436 BAI m
Buku Teks SO  Universitas Indonesia Library
cover
Universitas Indonesia, 1995
TA143
UI - Tugas Akhir  Universitas Indonesia Library
cover
Fakultas Teknik Universitas Indonesia, 2000
TA1978
UI - Tugas Akhir  Universitas Indonesia Library
cover
Fakultas Teknik Universitas Indonesia, 1998
TA2817
UI - Tugas Akhir  Universitas Indonesia Library
cover
Ruhama Sidqy
"[ABSTRAK
Sistem generator ice slurry berbasis air laut diteliti secara eksperimental dengan tujuan untuk mengetahui pengaruh dari kecepatan putaran pompa (rpm) terhadap beberapa karakteristik dari ice slurry. Berdasarkan data eksperimen diketahui bahwa kecepatan putaran pompa sentrifugal pada suatu kecepatan putaran pengaduk tertentu berpengaruh secara signifikan terhadap kecepatan penurunan temperatur air laut. Kecepatan penurunan temperatur tertinggi adalah 1.08oC/menit yang terjadi pada putaran pompa 3000 rpm dan putaran pengaduk 800 rpm. Selain itu, waktu keluar ice slurry dari evaporator, waktu berhenti pengaduk, dan selisih antara kedua waktu tersebut juga bergantung pada kecepatan putar pompa dan pengaduk. Sebaliknya, daya listrik masukan pompa tidak bergantung pada kecepatan putar pengaduk. Daya pompa hanya bergantung kepada kecepatan putaran pompa. Beberapa parameter kinerja maksimum teoritis untuk siklus refrigerasi pada sistem ini telah dihitung dan didapatkan bahwa nilai koefisien performa maksimum teoritis adalah 4.89. ice slurry berbasis air laut diteliti secara eksperimental dengan tujuan untuk mengetahui pengaruh dari kecepatan putaran pompa rpm terhadap beberapa karakteristik dari ice slurry Berdasarkan data eksperimen diketahui bahwa kecepatan putaran pompa sentrifugal pada suatu kecepatan putaran pengaduk tertentu berpengaruh secara signifikan terhadap kecepatan penurunan temperatur air laut Kecepatan penurunan temperatur tertinggi adalah 1 08oC menit yang terjadi pada putaran pompa 3000 rpm dan putaran pengaduk 800 rpm Selain itu waktu keluar ice slurry dari evaporator waktu berhenti pengaduk dan selisih antara kedua waktu tersebut juga bergantung pada kecepatan putar pompa dan pengaduk Sebaliknya daya listrik masukan pompa tidak bergantung pada kecepatan putar pengaduk Daya pompa hanya bergantung kepada kecepatan putaran pompa Beberapa parameter kinerja maksimum teoritis untuk siklus refrigerasi pada sistem ini telah dihitung dan didapatkan bahwa nilai koefisien performa maksimum teoritis adalah 4 89.

ABSTRACT
An ice slurry generator system based on seawater is studied experimentally in order to find out the influence of centrifugal pump rotation speed (rpm) to some characteristics of ice slurry. Based from experimental data it is known that pump rotation speed in certain mixer rotation speed is significantly influence the seawater temperature drop rate. The highest temperature drop rate is 1.08oC/minute that occur at pump speed 3000 rpm and mixer speed 800 rpm. Besides, time of ice slurry to come out from evaporator, time of mixer to stop, and time difference between them are depend on pump and mixer rotation speed.
Otherwise, electrical power input of pump is not dependent on mixer rotation speed. Power input of pump is only depend on pump rotation speed. Some parameter of theoretical maximum performance has been calculated and obtained that theoretical maximum coefficient of performance is 4.89., An ice slurry generator system based on seawater is studied
experimentally in order to find out the influence of centrifugal pump rotation
speed (rpm) to some characteristics of ice slurry. Based from experimental data it
is known that pump rotation speed in certain mixer rotation speed is significantly
influence the seawater temperature drop rate. The highest temperature drop rate is
1.08oC/minute that occur at pump speed 3000 rpm and mixer speed 800 rpm.
Besides, time of ice slurry to come out from evaporator, time of mixer to stop, and
time difference between them are depend on pump and mixer rotation speed.
Otherwise, electrical power input of pump is not dependent on mixer rotation
speed. Power input of pump is only depend on pump rotation speed. Some
parameter of theoretical maximum performance has been calculated and obtained
that theoretical maximum coefficient of performance is 4.89.]"
Depok: Fakultas Teknik Universitas Indonesia, 2015
S58849
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Fauzan
"ABSTRAK
Ice slurry generator is a technology that is currently potential applied to
fishermen. The solution from seawater, moreover characteristict of ice is soft and the
temperature can be below 0 °C can make the fish quality will remain intact. The
current study focused to find the value of the scraper shaft motor rotation optimal to
obtain the optimum point of the process of making ice slurry of seawater with a
scraped surface ice slurry generator. Experimental data obtained by doing variation of
the pump and the auger shaft RPM conducted respectively by 4 variations. From the
sixteen trials, it was found that the optimum point on the pump rotation is 2000 rpm
and 1000 rpm for motor rotation.

ABSTRACT
Ice slurry generator merupakan teknologi yang saat ini potensial jika
diterapkan kepada nelayan. Bahan dasar dari air laut, serta karaktekteristik es yang
lembut dan suhunya bisa di bawah 0 oC membuat kualitas ikan akan tetap terjaga.
Penelitian kali ini memfokuskan untuk mencari nilai putaran auger shaft untuk
mendapatkan titik optimal dari proses pembuatan bubur es dari air laut dengan
scraped surface ice slurry generator. Data ekesperimental diperoleh dengan
melakukan variasi RPM pompa dan auger shaft yang dilakukan masing-masing
sebanyak 4 variasi. Dari 16 kali percobaan, ditemukan titik optimum berada pada
putaran pompa 2000 rpm dan motor 1000 rpm"
2015
S65717
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nijiko Suryadikara
"Indoor cycling merupakan salah satu variasi olahraga hasil dari inovasi manusia untuk meningkatkan kesehatan dan kebugaran. Indoor cycling merupakan kelas olah fisik dengan menggunakan alat sepeda stasioner dalam ruang tertutup (indoor). Indoor cycling merupakan hasil inovasi dan perkembangan dari aktifitas bersepeda outdoor (luar ruang) konvensional. Oleh karena indoor cycling merupakan inovasi olahraga yang dilaksanakan di dalam ruangan, maka dalam perkembangannya, indoor cycling dilengkapi dengan suasana kualitas ruang yang sengaja dirancang untuk memicu semangat dan gairah para penggunanya melalui indera penglihatan dan pendengaran. Elemen kualitas ruang yang diperhatikan pada penulisan skripsi ini adalah warna, cahaya, dan musik (audio).

Indoor cycling is one of sport varieties of human?s innovations to increase health and fitness. Indoor cycling is a form of physical exercise held indoors, using stationary bikes. It is a result of the innovation and development from the conventional outdoor cycling. Since indoor cycling is an innovation of workout held indoors, in its development, it is completed with the atmosphere of spatial interior which is deliberately designed to trigger its users to feel vigorous and excited through visual and auditory senses. Elements of spatial qualities studied in writing this thesis are color, lighting, and music (audio)."
Depok: Fakultas Teknik Universitas Indonesia, 2016
S62805
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ahmad Akbar Habibillah
"Motor sinkron adalah salah satu jenis motor listrik yang sering digunakan dalam perindustrian dimana karakteristiknya memiliki kecepatan konstan yang sinkron. Motor ini memiliki kelebihan dalam konstruksinya yang sederhana, tingkat efisiensinya yang tinggi dan power factor yang dapat dikendalikan. Namun, motor sinkron memiliki maintenance yang cukup rumit dan harganya relatif lebih mahal akibat penggunaan komponen magnet didalamnya. Pada penelitian ini, komponen magnet pada motor sinkron akan diganti dengan lilitan untuk mengatasi masalah tersebut. Selain itu, untuk mempertahankan nilai efisiensi dan torsi terbaik yang dihasilkan motor sinkron perlu mencari pole-slot combination yang sesuai. Performa dari motor sinkron akan disimulasikan menggunakan software MagNet dan MotorSolve, sehingga dapat dilihat hasil arus, tegangan, fluks, torsi yang dihasilkan oleh motor sinkron.

Synchronous motor is one type of electric motor that is often used in industry where the characteristics have a synchronous constant speed. These motors have the advantages of simple construction, high efficiency and controllable power factor. However, synchronous motors have quite complicated maintenance and are relatively more expensive due to the use of magnetic components in them. In this study, the magnetic component of the synchronous motor will be replaced with a winding to overcome this problem. In addition, to maintain the best efficiency and torque values produced by synchronous motors, it is necessary to find an appropriate pole-slot combination. The performance of the synchronous motor will be simulated using MagNet and Motorsolve software, so that the results of the current, voltage, flux, torque generated by the synchronous motor can be seen."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Becker, Peter W.
Tokyo: McGraw-Hill Kogakusha, 1977
621.381 5 BEC d
Buku Teks  Universitas Indonesia Library
cover
Boltyanski, Vladimir G.
"The book then presents its core material, which is a more robust maximum principle for both deterministic and stochastic systems. The results obtained have applications in production planning, reinsurance-dividend management, multi-model sliding mode control, and multi-model differential games. Using powerful new tools in optimal control theory, this book explores material that will be of great interest to post-graduate students, researchers, and practitioners in applied mathematics and engineering, particularly in the area of systems and control."
New York: [Springer, ], 2012
e20418964
eBooks  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>