Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 174834 dokumen yang sesuai dengan query
cover
Martin Chorazon Alfareno
"Pada tugas akhir ini telah dilakukan perancangan dan evaluasi. Keseluruhan sistem dan pengembangan menggunakan FPGA Xilinx Spartan-3E. Smart Stick berfungsi sebagai alat bantu berjalan bagi orang buta dalam menentukan arah. Sistem Smart Stick menggunakan 3 buah sensor ultrasonik dengan posisi pemasangan pada bagian depan, kanan, dan kiri. Sensor ultrasonik sebagai modul input akan mendeteksi keberadaan objek disekitar Smart Stick. Pembatasan jarak baca sensor sejauh 100 cm yang berfungsi sebagai jarak aman bagi pengguna smart stick. FPGA yang digunakan adalah FPGA Xilinx Spartan-3E sebagai controller, buzzer sebagai modul output akan mengeluarkan bunyi peringatan sebagai tanda bahwa sensor mendeteksi adanya penghalang. Percobaan ini menunjukkan semua kinerja subsistem yang memuaskan.

In this final project Smart Stick has been designed and evaluated. The system and development use FPGA Xilinx Spartan-3E. Smart Stick serves as a tool for blind people to determine the direction for walking. Smart Stick system uses 3 pieces of ultrasonic sensors with mounting position on the front, right, and left. Ultrasonic sensors as the input module detect the presence of objects around the Smart Stick. The sensors read having distance limitation as far as 100 cm, this is a safe distance for the Smart Stick user. FPGA used is FPGA Xilinx Spartan-3E as a controller, buzzer as output modules will issue a warning sound as a sign that the sensor detects the presence of a barrier. The experiment show me all the subsystems performed satisfactorily."
Depok: Fakultas Teknik Universitas Indonesia, 2012
S43340
UI - Skripsi Open  Universitas Indonesia Library
cover
Wahyu Krisyanto
"ABSTRAK
Jaringan dengan teknologi Low Power Wide Area (LPWA) memungkinkan implementasi sistem komunikasi dari perangkat ke perangkat dengan jumlah yang sangat banyak dalam satu jaringan. Jaringan LPWA sangat efisien dalam hal penggunaan daya dan bandwidth, karena jaringan LPWA menggunakan daya rendah dan beroperasi dengan bandwidth yang sempit serta jangkauan yang luas. Jenis perangkat yang terhubung melalui jaringan LPWA sebagian besar merupakan berbagai jenis sensor, baik sensor untuk kondisi lingkungan, kesehatan, transportasi dan juga sensor untuk mengukur penggunaan energi. Dalam penelitian ini, perangkat yang terhubung ke jaringan LPWA adalah Smart Meter. Smart Meter adalah alat ukur digital yang terdiri dari sensor yang berfungsi melalukan pengukuran dan pencatatan data yang terhubung ke pusat data yang dapat diakses oleh pengguna. Jenis teknologi LPWA yang digunakan adalah LoRa dengan parameter teknis sesuai dengan regulasi yang ada di Indonesia. Tujuan dari penelitian ini adalah merancang suatu jaringan yang sesuai untuk memenuhi utilitas Smart Meter di wilayah Jakarta dan Tangerang. Implementasi Smart Meter diharapkan dapat memberikan banyak manfaat kepada pengguna dan perusahaan penyedia layanan energi, seperti meningkatkan kualitas layanan, meningkatkan efisiensi penggunaan energi, mengurangi biaya operasional, mengurangi susut energi khususnya listrik serta memberikan hasil pengukuran yang akurat untuk memperkirakan kebutuhan energi kedepan.

ABSTRACT
Network with LPWA technology (Low Power Wide Area) enables the implementation of communication systems from devices to devices with a very large number in one network. The LPWA network is very efficient in terms of power usage and bandwidth, because the LPWA network uses low power and operates with a narrow bandwidth with wide coverage. Most types of devices connected through the LPWA network are various types of sensors, such as sensors for environmental conditions, health, transportation and sensors to measure energy usage. In this research, the devices which are connected to LPWA network are Smart Meters. Smart Meters are digital measuring devices consisting of sensors with functions of measuring and recording data which connected to a data center that can be accessed by users. The type of technology LPWA used in this research is LoRa with technical parameters in accordance with regulations in Indonesia. The purpose of this research is to design and plan an appropriate network to comply Smart Meter utilities in the Jakarta and Tangerang areas. Smart Meter implementation is expected to provide many benefits to users and energy service companies, such as improving service quality, increasing energy usage efficiency, reducing operational costs, reducing energy and electricity losses also providing accurate measurement results to estimate future energy requirements."
2019
T53366
UI - Tesis Membership  Universitas Indonesia Library
cover
Dadang Gunawan
Jakarta: UI-Press, 2004
PGB 0413
UI - Pidato  Universitas Indonesia Library
cover
"In this book the authors first provide a comprehensive survey on the available studies on control, management, and optimization strategies in AC and DC microgrids. The authors then provide the design of a laboratory-scale microgrid system. Finally, a real-world implementation of the deigned framework is provided. This book paves the way for researchers working on the smart microgrids spread over the fields of electrical engineering, power systems, and smart infrastructures. Furthermore, it provides the readers with a comprehensive insight to understand an in-depth big picture of smart microgrids as well as an all-inclusive framework for laboratory-scale implementation of a microgrid. It is suitable for senior undergraduate students, graduate students who are interested in research in areas related to future smart grids and microgrids, and the researchers working in the related areas. This book also can be used as a reference book for researchers who want to develop laboratories on smart microgrids for future research."
Switzerland: Springer Nature, 2019
e20509777
eBooks  Universitas Indonesia Library
cover
Yessica Ratri Wiguna
"Transfer daya nirkabel merupakan sebuah cara baru untuk mengatasi ketidaknyamanan dari sumber listrik dengan kabel. Salah satu cara untuk menyuplai listrik tanpa kabel yaitu menggunakan resonansi kopling elektromagnetik. Cara ini dapat menyuplai listrik ke beban karena adanya medan magnet dan medan listrik di sekitar alat transfer daya nirkabel tersebut. Jadi, perlu diketahui karakteristik medan magnet dan medan listrik dari antena pengirim dan penerima yang akan digunakan pada alat tersebut dan hasilnya apabila dibandingkan dengan standar paparan elektromagnetik. Pada tulisan ini, tiga model antena loop dianalisis yaitu antena berongga, antena pejal, dan antena mikrostrip. Beberapa parameter disimulasikan dengan perangkat lunak berbasis finite integration technique (FIT) yaitu intensitas medan magnet(H-field), medan magnet(B-field), dan intensitas medan listrik(E-field).
Hasil simulasi menunjukkan bahwa antena mikrostrip menghasilkan nilai tertinggi pada ketiga parameter yang dianalisis yaitu H-field, B-field, and E-field. Hasil distribusi medan untuk tipe antena yang lain, antena berongga dan pejal, lebih kecil dari pada yang dihasilkan oleh antena mikrostrip. Berdasarkan standar paparan elektromagnetik dari ICNIRP dan IEEE, nilai medan magnet dan medan listrik alat transfer daya nirkabel hasil simulasi masih dibawah standar.Sedangkan pada penerapannya untuk teknologi ruang angkasa, desain dan pengukuran pada jarak 5 mm belum sesuai untuk teknologi ruang angkasa.

Wireless power transfer is a new way to break inconvenience of wiring power sources. The best way how to supply electric power through wireless system is using the electromagnetic coupled resonance phenomena. It can supply electric power to the load because of the magnetic and electric field that emerge around wireless power transfer device. So, we need to know the characteristic of magnetic and electric field from transmitter and receiver that will be used for the device and see the results based on electromagnetic exposure standard. In this study, three loop model of antennas are investigated, namely a solid coil model, hollow coil model, and microstrip coil model. Some parameters of those models are numerically analyzed using the finite integration technique (FIT) such as magnetic field intensity (H-field), magnetic field (B-field), and electric field intensity (E-field).
The final result shows that microstrip antenna has the highest score in H-field, B-field, and E-field. The field distribution of the others, those are solid coil and hollow coil, are relatively less than that the microstip coil has.Based on electromagnetic exposure like ICNIRP and IEEE, magnetic and electric field of wireless power transfer device are below the standards. Meanwhile, for space aircraft applications, this kind of design and simulation which are measured on 5 mm is unappropriate for space aircraft technology.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52588
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Naradi Karim
"Skripsi ini membahas mengenai perancangan dan pengujian alat pemisah objek berwarna yang menggunakan sensor LDR sebagai sensor warna yang ekonomis dan mudah dirangkai. Menggunakan motor servo sebagai aktuator gerak untuk jalur pemilih agar objek diarahkan kedalam wadah, digunakan LCD untuk tampilan untuk warna yang sedang menampilkan jenis warna yang terdeteksi.Sebuah motor DC digunakan untuk membuka dan menutup alur alat memilih, motor DC kedua digunakan sebagai aktuator untuk mengaduk wadah agar objek dalam wadah dapat turun kebawah akibat gaya gravitasi. Alat ini menggunakan sebuah mikrokontroler ATMega 8535 sebagai pusat pemproses seluruh kerja alat ini.

This skripsi discusses a designof an coloured - object separator, it is design using a colour sensor, the LDR is used as an economical and easy to assemble colour sensor. Having a servo motor as the actuator controls the motion of the separator lane to the appropriate designated coloursboxes, an LCD for display to show the colour object at separator box, one of dc motor is used to control the opening of the lid to the seperator lane, another dc motor is used for rotation of the stirres so the object can move downward to the lane due to gravitation. The design uses ATMega8535 Microcontroller as teh center of process all the activities in the system."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S46999
UI - Skripsi Membership  Universitas Indonesia Library
cover
Anggiat Bernard
"Metode Adaptif Neuro Fuzzy Inference System (ANFIS) untuk penerapan pada identifikasi dan aplikasi kendali sistem multi masukan multi keluaran (MIMO) dan sistem satu masukan satu keluaran (SISO) diharapkan dapat menjadi salah satu metode kendali cerdas alternatif selain mengandalkan metode kendali cerdas umum seperti Jaringan Syaraf Tiruan backpropagation. Sistem plant MIMO tersebut mengacu kepada sistem Pesawat Udara Nirawak SRITI yang menghasilkan 3 surface kendali.
Metode ANFIS yang dibangun merupakan metode yang terdiri dari metode Jaringan Syaraf Tiruan Adaptif dan model sistem inferensi fuzzy. Algoritma pembelajaran identifikasi, invers, dan algoritma pembelajaran On-Line merupakan metode pembelajaran yang digunakan pada sistem ini.
Melalui rancangan metode ANFIS ini kemudian dilakukan simulasi untuk memperlihatkan hasil identifikasi dan pembelajaran secara On-line sistem ketika masukan dan keluaran sistem Pesawat Udara Nirawak (UAV) diberikan. ANFIS dengan algoritma pembelajaran identifikasi dan invers telah dapat memberikan hasil respon yang baik, namun untuk menyempurnakan hasil metode pembelajaran Off-line sistem harus diberikan suatu pengestimasi tambahan yang menjadikannya sistem On-line. Hasil percobaan On-line telah menunjukkan keberhasilan sistem ANFIS dalam mengidentifikasi dan mempelajari sistem SISO dan MIMO.

Adaptif Neuro Fuzzy Inference System (ANFIS) method for Multi Input Multi Output (MIMO) plant system identification and control application expected to become one of an alternative smart control method in addition to relying on another smart control method such as backpropagation neural network. That MIMO plant system refers to Unmanned AeroVehicle which produce 3 control surface.
ANFIS method which will be proposed consist of adaptive neural network method and Fuzzy Inference System model. Identification learning algorithm, inverse learning algorithm, and On-line learning are identification and control methods used in this system.
From this proposed ANFIS method then simulated to demonstrate the identification and learning’s output when UAV SRITI plant system's input and output were given. ANFIS with identification and inverse learning algorithm had given good response, but for more perfection of Off-line system method, there should be given some additional estimator to make it On-line. The On-line method result has demonstrated the success of ANFIS system in identifying and learning SISO and MIMO systems.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52846
UI - Skripsi Membership  Universitas Indonesia Library
cover
Mohammad Malawat
"Latar belakang penelitian ini adalah munculnya beberapa isu global terkait dengan kendaraan bermotor. Isu tersebut antara lain isu keselamatan, isu lingkungan hidup, dan isu konservasi energi. Isu keselamatan lebih menyoroti pada angka tabrakan dan fatalitas yang cukup tinggi. Sehingga perlu dicari jalan untuk menurunkan angka tersebut. Sementara itu, isu lingkungan hidup dan isu konservasi energi lebih menyoroti pencarian energi baru, terbarukan yang pada akhirnya mengerucut pada energi listrik. Di sisi lain, perhatian Pemerintah Republik Indonesia (RI) ditujukan pada penggunaan angkutan Bus Rapid Transit (BRT) di wilayah perkotaan. Berdasarkan isu global dan perhatian Pemerintah maka dilakukan penelitian dengan tujuan mengembangkan penyerap energi tumbukan (PET) dan optimasi pemicu rusak untuk meningkatkan keselamatan tabrakan pada bus listrik.
Metode penelitian pengembangan ini adalah analisis eksperimen menggunakan uji jatuh, analisis teori menggunakan mekanisme lipat dasar, serta analisis numerik menggunakan metode elemen hingga dan aplikasi Pam Crash sebagai alat bantu. Sementara itu, untuk optimasi menggunakan Response Surface Method (RSM). Eksperimen uji jatuh menggunakan menara tinggi 6 m dengan tinggi jatuh 1,5 m dan beban jatuh 80 kg (1.175 J). Alat ukur berupa load cell berkapsitas 88,9 kN dan kamera berkecepatan tinggi 960 fps.
Hasil penelitian ini terkait, posisi pemicu rusak pada komponen PET (k-PET) yang memiliki gaya puncak yang rendah dan penyerapan energi yang tinggi terletak paling dekat dari arah datang gaya tumbukan yaitu 10 mm pada baja selongsong bujur sangkar dengan tebal dinding 0,6 mm serta desain struktur PET (s-PET) pada bus listrik dengan konfigurasi 2 (dua) k-PET pada cross member paling depan di mana nilai gaya puncak 4.900,53 kN mengurangi 11,4% dari 5.529,86 kN dan penyerapan energi 1.193.328 J. Desain s-PET memiliki kemampuan menyerap energi 48.497 J hanya 4% dari 1,26 MJ dan memenuhi standar UN ECE R29 di mana harus memiliki kemampuan menyerap energi ≥ 44.100 J.

The background of this research is the arising of several global issues related to motor vehicles. These issues were including safety issues, environmental issues, and energy conservation issues. Safety issues more highlight on the high number of accidents and fatalities. We need to find a way to reduce those number. Meanwhile, environmental issues and energy conservation issues further highlight the search for new or renewable energy which ultimately converges on electrical energy. On the other hand, the attention of the Government of the Republic of Indonesia (RI) was aimed at the use of Bus Rapid Transit (BRT) in urban areas. Based on global issues and the attention of the Government, the research was conducted with the aim of impact energy absorbers (IEA) developing and crush initiators optimization to improve the crashworthiness on electric buses.
The method for research development are the experimental analysis using drop test, theoretical analysis using basic folding mechanism, and numerical analysis using finite element method and also Pam Crash software as a tools. Meanwhile, for optimization using Response Surface Method (RSM). The drop test using a tower with 3 m high, effective drop height of 1,5 m and drop load of 80 kg or 1.175 J. The measuring instrument is an 88.9 kN load cell and a 960 fps high speed camera.
The results of this study related the position of the crush initiators in component of IEA (c-IEA) which had a low peak force and high energy absorption located close to the initial of the impact force which was 10 mm on a steel square tube with 0.6 mm wall thickness and structure of IEA (s-IEA) on an electric bus with a configuration of 2 (two) c-IEA on the front cross member where the value of the peak force is 4.900,53 kN reducing 11,4% from 5.529,86 kN and energy absorption is 1.193.328 J. The s-IEA had the ability to absorb 48.497 J only 4% of 1,26 MJ and comply to the UN ECE R29 where it had the ability to absorb the energy ≥ 44.100 J.
"
Depok: Fakultas Teknik Universitas Indonesia, 2019
D2649
UI - Disertasi Membership  Universitas Indonesia Library
cover
William Andrian
"Skripsi ini membahas mengenai desain dan rancang bangun perangkat pengukur jumlah tetes cairan infus. Perangkat ini bekerja dengan memanfaatkan LED inframerah (IR383) dengan panjang gelombang 940 nm dan fotodioda PIN (NTE3033) dengan respon panjang gelombang 700 - 1050 nm sebagai komponen utama. Perangkat ini didesain agar dapat mendeteksi jumlah tetesan cairan infus dalam selang waktu tertentu dan dapat memberikan informasi secara otomatis melalui tampilan pada LCD, serta bunyi alarm jika terjadi masalah pada perangkat infus atau cairan infus sudah habis.
Dari hasil pengujian perangkat dengan menggunakan 3 jenis cairan yaitu ringer asetat (warna bening), vitamin b kompleks (warna merah), dan tutofusin (warna kuning) dengan 3 jenis kecepatan tetes infus, didapat bahwa warna cairan tidak berpengaruh terhadap tingkat keakuratan perangkat. Namun demikian, semakin tinggi kecepatan tetes, semakin besar kesalahan perangkat. Tingkat kesalahan maksimal perangkat yang diperoleh adalah 3,85 % yang sesuai dengan standar FDA.

In this final project, the device operated by using an Infrared LED (IR383) with 940 nm wavelength and a photodiode (NTE3033) with wavelengths response ranging from 700nm - 1050 nm as the main components of the device. This device was designed to determine the number of infusion drops and send the information automatically to an LCD display as well as to sound the alarm in case problems occurred with the infusion set or if the infusion liquid was finished. Testing of the device was performed using three kinds of infusion liquids with three different colours, namely: Ringer Lactate (transparent), Vitamin B Complex (red), and Tutofuchsin (yellow). Three kinds of flow rates were also applied.
The results of the experiments showed that colours could not affect the accuracy of the drop counting device while flow rate could affect the accuracy of the drop counting device. The test results showed the higher the speed drops, the greater the device error. The test results showed a maximum degree of error of the device was 3.85 percent which was in accordance with the FDA standard.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S53437
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dini Fronitasari
"ABSTRAK
Perkembangan biometrik sebagai alternatif untuk menggantikan proses otentikasi konvensional seperti pin, password, code mengalami peningkatan yang cukup significant. Peningkatan adopsi teknologi biometrik dalam industri e-commerce juga mendorong pasar biometrik semakin berkembang beberapa tahun ke depan. Vein merupakan salah satu biometric feature yang dapat diadaptasi sebagai suatu alat identifikasi pengenalan individu yang sedang banyak dikembangkan hingga saat ini, karena memiliki pola dan struktur vein khas serta memiliki kehandalan tersendiri jika dibandingkan dengan ciri biometrik lainnya, seperti terletak pada bagian dibawah kulit, sulit untuk dilihat dengan mata telanjang ataupun kamera biasa dan sulit untuk rusak dan memiliki liveness detection yang tidak dimiliki biometrik lainnya.
Local Binary Pattern (LBP) dikenal salah satu deskriptor pengenalan gambar yang paling banyak digunakan gambar berbasis tekstur karena keunggulannya. Selain itu LBP merupakan salah satu pendekatan yang paling umum karena kesederhanaan komputasi, yang invarian terhadap perubahan pencahayaan dan kehandalan dalam klasifikasi citra karena menangkap sebagian besar fitur visual penting dari gambar. Local Binary Pattern (LBP) telah diimplementasikan secara luas untuk fitur ekstraksi tangan, mata, wajah, mata, dan gambar lainnya. Meskipun LBP memiliki banyak keuntungan, akan tetapi dari modifikasi LBP yang telah banyak dikembangkan masih menghasilkan deskriptor besar 8-bit untuk setiap piksel dan sensitif terhadap rotasi gambar. Pengembangan yang ada juga belum memiliki fungsi hybrid yakni mengurangi vektor ciri tetapi sekaligus meningkatkan kemampuan diskriminasi.Dalam disertasi ini, deskriptor baru diusulkan berasal dari LBP original yang dikembangkan oleh Ojala, yang disebut Diagonal Vertical Horizontal Local Binary pattern (DVHLBP) yang berhasil menangkap primitif sifat gambar seperti tepi, sudut, garis-ujungnya, bintik-bintik, daerah datar, dan lokal lainnya karakteristik seperti garis, yang belum dibahas dalam LBP konvensional.
Konsep dasar dari Diagonal Vertical Horizontal Local Binary pattern (DVHLBP) dalam penelitian ini mengusulkan teknik ekstraksi ciri dengan operasi yang bisa mengakomodir masalah rotasi yang sering terjadi pada pengenalan vein dengan fungsi representasi bilangan biner. Fitur gambar harus mengambil variasi piksel diagonal serta variasi piksel horizontal dan vertikal di piksel sekitarnya, sehingga dapat berfungsi dengan baik bahkan dalam kasus rotasi dalam gambar. Kelebihan lain dari descriptor yang diusulkan adalah mempertimbangkan rata-rata/mean dari piksel pusat. Teknik ini menganalisis perbedaan intensitas antara piksel pusat dengan piksel tetangganya, dengan membandingkan pusat piksel dengan sepasang piksel berlawanan dalam diagonal yang sama. Dari beberapa skema multidirectional yang dilakukan yakni pada 8 matriks ketetanggan didapat pola biner yang tadinya 8-bit dalam LBP asli menjadi hanya 4-bit dalam DVHLBP. Selain itu penambahan mekanisme uniform pattern untuk proses feature selection juga dilakukan dimana secara otomatis hal tersebut mengurangi panjang histogram mengingat hanya ciri diskriminan yang diambil dan hal ini berdampak pula pada kebutuhan penyimpanan (storage) untuk hasil ekstraksi, hal ini berpengaruh pula pada kompleksitas ruang sistem yang dibangun O(n).
Deskriptor yang diusulkan tetap mempertahankan informasi penting gambar sebuah vein (discrimination feature), invarian terhadap perubahan pencahayaan dan memiliki sifat rotasi invariant. DVHLBP yang diusulkan telah disimulasikan dan dilakukan analisis, dimana simulasi yang dilakukan menggunakan PUT Vein Data set dan CASIA Multispectral Data Set. Hasil simulasi menunjukkan bahwa usulan sistem dapat mencapai kinerja yang lebih baik dengan State-of-The Art dimana error rate (ERR) dari teknik yang diusulkan adalah sebesar 0,08 untuk telapak tangan (palm vein) dan 0.22 untuk pergelangan tangan (wrist vein) dengan akurasi rate sebesar 99,6 % pada palm vein dan 99.4% pada wrist vein. Dan dilihat dari sisi kompleksitas sistem O(n) mengalami efisiensi yang mencapai 50% dibuktikan dalam bentuk matematis.

ABSTRACT
The development of biometrics as an alternative to replacing conventional authentication processes such as pins, passwords, code experienced a significant increase. Increasing the adoption of biometric technology in the e-commerce industry also drives the biometric market to grow in the next few years. Vein is one of the biometric features that can be adapted as an individual identification identification tool which is being developed to date, because it has a distinctive vein pattern and structure and has its own reliability compared to other biometric features, such as located under the skin, it is difficult to seen with the naked eye or ordinary camera and difficult to damage and have liveness detection that other biometrics do not have.
Local Binary Pattern (LBP) is known as one of the most widely used image recognition descriptors based on texture because of its superiority. In addition LBP is one of the most common approaches due to computational simplicity, which is invariant of lighting changes and reliability in image classification because it captures most important visual features of images. Local Binary Pattern (LBP) has been widely implemented for extraction features of hands, eyes, face, eyes and other images. Although LBP has many advantages, however, the LBP modification that has been widely developed still produces a large 8-bit descriptor for each piksel and is sensitive to image rotation. The existing development also does not have a hybrid function, namely reducing feature vectors but also increasing discrimination capabilities. In this dissertation, a new descriptor is proposed from the original LBP developed by Ojala, called the Diagonal Vertical Horizontal Local Binary pattern (DVHLBP) that successfully captures primitive traits images such as edges, angles, edges, spots, flat areas, and other local characteristics such as lines, which have not been discussed in conventional LBP.
The basic concept of Diagonal Vertical Horizontal Local Binary Pattern (DVHLBP) in this study proposes feature extraction techniques with operations that can accommodate rotation problems that often occur in the introduction of veins with binary number representation functions. The image feature must take diagonal pixels variations as well as horizontal and vertical pixels variations in the surrounding pixels, so that it can function properly even in the case of rotations in the image. Another advantage of the proposed descriptor is considering the mean / mean of center pixel. This technique analyzes the difference in intensity between the central piksel and neighboring piksels, by comparing the center of the piksel with a pair of opposite piksels in the same diagonal. From several multidirectional schemes on 8 neighboor that are carried out, binary patterns are obtained which were 8-bits in the original LBP to be only 4-bits in DVHLBP. In addition, the addition of the uniform pattern mechanism for the feature selection process is also done where it automatically reduces the length of the histogram considering that only discriminant characteristics are taken and this also affects the storage requirements for extraction results, this also affects the complexity of the system space built O (n).
The proposed descriptors retain important information on a vein image (discrimination feature), invariance of lighting changes and have rotational invariant properties. The proposed DVHLBP has been simulated and analyzed, where simulations were carried out using the PUT Vein Data set and CASIA Multispectral Data Set. The simulation results show that the proposed system can achieve better performance with State-of-the-Art where the error rate (ERR) of the proposed technique is 0.08 for the palm (palm vein) and 0.22 for the wrist (wrist vein) with an accuracy rate of 99.6% on the palm vein and 99.4% on the wrist vein. And in terms of system complexity O (n) has an efficiency that reaches 50% as evidenced in mathematical form."
2019
D2685
UI - Disertasi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>