Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 105816 dokumen yang sesuai dengan query
cover
Siburian, Apriliani
"Kepatuhan pemakaian APD oleh perawat saat memberikan tindakan keperawatan sangat memperngaruhi keselamatan diri dari perawat itu sendiri. Kepatuhan yang ditunjukkan dengan sikap positif dapat dipengaruhi oleh tinggi atau rendahnya pengetahuan terhadap pentingnya penggunaan APD. Penelitian ini bertujuan untuk mengetahui gambaran penggunaan APD terhadap keselamatan kerja perawat IGD di RSUD Pasar Rebo. Pengambilan sampel dengan metode total sampling dimana peneliti melibatkan semua perawat yang bekerja di IGD RSUD Pasar Rebo dan bersedia untuk terlibat dalam penelitian. Sampel yang terlibat sejumlah 30 orang. Data diperoleh melalui kuesioner berbentuk lembaran tes yang berisi 40 pertanyaan dan melalui wawancara dengan kepala perawat. Hasil analisa data menunjukkan bahwa 63,30% perawat IGD memiliki pengetahuan yang tinggi terhadap penggunaan APD. Sebanyak 53,30% perawat memiliki sikap negatif dalam menggunakan APD. Alasan terbanyak menggunakan APD adalah karena ingin menjaga keselamatan diri dan alasan terbanyak tidak menggunakan APD adalah karena sudah terbiasa tidak menggunakan APD.

The compliance of using PPE by the nurses when providing nursing actions, greatly affect the safety of the nurses. Compliance it that indicated with a positive attitude, can be affected by high or low level of knowledge of the importance of using PPE. The aims of this research is to know the description of using PPE for safety of the nurse in Emergency Room (ER) of Pasar Rebo Hospital. The sampling's method of this research is total sampling, the researchers involved all the nurses that working in ER of Pasar Rebo Hospital and willing to engage in research. Sample involved 30 persons. Data obtained through a questionnaire sheet-shaped test that containing 40 questions, and through interviews with head nurses of the ER. The results of the analysis data showed that 63.30% ER nurses have a high knowledge of using PPE. And as much as 53.30% of nurses had negative attitudes in the use of PPE. Getting safety is the biggest reason for wearing PPE because nurses want to maintain the safety of themselves and the most reason not wearing PPE was not accustomed to use PPE."
Depok: Fakultas Ilmu Keperawatan Universitas Indonesia, 2012
S43080
UI - Skripsi Open  Universitas Indonesia Library
cover
Cahyani Mutiara
"Berdasarkan penelitian yang dilakukan pada sektor informal di tukang kayu pada industri pengolahan kayu adalah pekerjaan dengan karakteristik yang sering mengalami keluhan kesehatan yang sangat tinggi. Penelitian ini membahas mengenai faktor-faktor yang mempengaruhi perilaku penggunaan Alat Pelindung Diri (APD) pekerja sektor informal pada industri kusen sepanjang jalan raya Jatibening, Bekasi 2012. Tujuan dari penelitian ini untuk melihat faktor-faktor yang mempengaruhi perilaku pekerja dalam menggunakan APD. Informan dalam penelitian ini sebanyak sembilan orang yang berasal dari lima toko yang berbeda dengan jumlah toko keseluruhan ada tujuh. Jenis penelitian ini adalah kualitatif dengan desain penelitian case study. Metode penelitian ini dengan menggunakan wawancara mendalam dan observasi langsung.
Untuk hasil penelitian berdasarkan variabel yang berkaitan dengan faktor-faktor yang mempengaruhi perilaku pemakaian APD dapat disimpulkan bahwa pengetahuan, ketersediaan fasilitas, dan juga pengawasan mempengaruhi pekerja dalam menggunakan APD Sedangkan untuk tema penelitian mengenai sikap, informan sudah memiliki kesadaran dalam penggunaan APD tetapi tetap tidak menggunakan APD untuk itu sikap tidak berpengaruh terhadap perilaku penggunaan APD. Peningkatan dan perbaikan dari pengetahuan, fasilitas, dan pengawasan pekerja dalam memakai APD perlu dilakukan agar perilaku penggunaan APD dapat sepenuhnya berjalan dengan baik.

Based on research conducted in the informal sector in the carpenter's wood processing industry is a job with characteristics that often have very high health complaints. This study discusses the factors that influence the behavior of the use of Personal Protective Equipment (PPE) informal sector workers in the industry sills along the highway Jatibening, Bekasi 2012. The purpose of this research is to look at the factors that influence the behavior of workers in the use of PPE. Informants in this study were nine people from five different stores to shop overall number seven. This research is a qualitative case study research design. This research method by using in-depth interviews and direct observation.
For results based on variables associated with factors that influence behavior and the use of PPE can be concluded that the knowledge, availability of facilities, and also affects workers' control in the use of PPE As for the theme of research on attitudes, informant already have awareness in the use of PPE but still no use APD for that attitude does not affect the behavior of the use of PPE. Enhancement and improvement of knowledge, facilities, and supervision of the workers wear PPE needs to be done so that the behavior of the use of PPE can be completely worked well.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2013
S45277
UI - Skripsi Membership  Universitas Indonesia Library
cover
Yuliawati Kusumaningrum
"Latar belakang: Kecelakaan kerja dapat terjadi kapan saja, dimana saja dan setiap orang dapat mengalaminya. Menurut International Labour Organization (ILO) tahun 2005, di perkirakan bahwa setiap tahun sebanyak 270 juta orang mengalami kecelakaan kerja dan 160 juta orang mengalami pcnyakit akibat kexja. Di Jepang, pada tahun 1998 jumlah kasus kecelakaan kerja di sektor jasa konstruksi sebesar 28%, diantaranya mengalami kematian sebesar 40%. Sedangkan di USA pada tahun 2005, kasus kecelakaan kerja di sektor jasa konsuuksi karena tidak menggunakan APD sebesar 56%. Di Indonesia, PT X merupakan perusahaan yang bergerak di bidang jasa konstruksi yang memiliki kecelakaan kerja cukup tinggi dan belum pernah dilakukan analisisnya.
Metode: Penelitian menggunakan metode cross sectional. Dilakukan di PT X yang melaksanakan proyek konstruksi. Sampel sebanyak 461 responden diambil dari 1100 pekelja konslruksi.
Hasil dan kesimpulan penelitian: Diperoleh bahwa insiden kecelakaan kerja sebesar 34.7%, dengan frekuensi kecelakaan rata-rata 2.4 kali selama 1 tahun bekerja. Adapun karakteristik umur 21-30 tahun sebesar 44.5%, menikah sebesar 58.4% , pendidikan SMP sebesar 38%, pengetahuan tentang K3 yang kurang sebesar 45.3%, sikap baik sebesar 79%, pcrilaku kurang sebesar 46% dan tidak menggunakan alat pelindung diri sebesar 56.8%. Sedangkan faktor yang paling berpengaruh terhadap kecelakaan kerja adalah jenis pekerjaan pembesian (OR =l.490, CI 95%= 1.006-2.207; p=0.047).

Background: Anyone could be subject to occupational accidents, regardless of time and place. According to ILO on 2005, an estimated that, 270 million occupational accidents and 160 million work-related diseases each year. In Japan (1998), especially in construction industries areas, found that 28% for occupational accidents which 40% of them causes fatality. Therefore, in USA (2005) the number of occupational accident due to the unused PPE found 56%. ln Indonesia, PT X is one of relatively high for occupational accident construction company, that has not been researched yet.
Methods: The study used the cross-sectional method, sample was gathered 461 of 1100 workers, subjects from PT X in construction project.
Results and Conclusion: The study show that occupational accidents are 34.7% with frequency rate was 2.4 times for one working years. The group of age for 21-30 years old are 44.5%, married found 58.4%, Junior High School found 38%, lack of K3 knowledge found 45.3%, good attitude found 79%, lack of behavior found 46% and unused PPE found 56.8%. The iron related work acts as the highest risk of occupational accident (0R=l.490; CI95%=1.006-2.207; p=0,047).
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2008
T32339
UI - Tesis Open  Universitas Indonesia Library
cover
Catu Umirestu Nurdiani
"Pendahuluan: Data dari Occupational Safety and Health Association, (OSHA) menyatakan bahwa terjadi hampir sepuluh ribu kasus kecelakaan di laboratorium penelitian selama tahun 2005, melukai dua dari 100 ilmuwan. Rata-rata tingkat kejadian kecelakaan di laboratorium akademis sepuluh hingga lima puluh kali lebih tinggi dibandingkan dengan yang terjadi di laboratorium industri. Beberapa penyebab kecelakaan di laboratorium dapat bersumber dari sikap dan tingkah laku para pekerja, keadaan yang tidak aman dan kurangnya pengawasan. Penelitian ini bertujuan untuk mengetahui kepatuhan dan faktor terkait penggunaan Alat Pelindung Diri (APD) di laboratorium pada mahasiswa Prodi Diploma Analis Kesehatan Universitas MH Thamrin
Metode: Studi penelitian ini bersifat deskriptif analitik dengan desain cross sectional. Sampel sebanyak 328 mahasiswa Prodi Diploma Analis Kesehatan dengan variabel dependen adalah kepatuhan penggunaan APD dan variabel indepennya adalah faktor predisposisi (pengetahuan, sikap), faktor pemungkin (ketersediaan adanya APD, kenyamanan APD), faktor penguat (rekan mahasiswa, pengawasan, peraturan, sanksi). Analisis dilakukan dengan regresi logistik
Hasil: Responden yang patuh menggunakan APD sebanyak 227 (69,2%) dan yang tidak patuh menggunakan APD sebanyak 101 (30,8%). Tidak terdapat hubungan yang signifikan antara faktor predisposisi: pengetahuan (OR=1,73), sikap (OR=1,15), faktor pemungkin: ketersediaan APD (OR=0,63), kenyamanan APD (OR=2,74), faktor penguat: rekan mahasiswa (OR=2,74), pengawasan (OR=1,17), peraturan (OR=0,25), sanksi (OR=0,82).
Kesimpulan dan saran: Variabel paling dominan yang berhubungan dengan kepatuhan penggunaan APD adalah pengetahuan dengan OR=1,73 yang artinya mahasiswa yang pengetahuan tentang APD nya tinggi berpeluang 1,73 kali lebih tinggi untuk patuh menggunakan APD dibandingkan mahasiswa yang pengetahuan tentang APD nya rendah. Untuk penelitian selanjutnya agar ditambahkan dengan teknik kualitatif.

Introduction: Data from the Occupational Safety and Health Association (OSHA) states that nearly ten thousand cases of accidents in research laboratories during 2005 injured two out of 100 scientists. The average incidence rate of accidents in academic laboratories is ten to fifty times higher than what happens in industrial laboratories. Some causes of accidents in the laboratory can be derived from attitudes and behavior of workers, unsafe conditions and lack of supervision. This study aims to determine compliance and factors related to the use of Personal Protective Equipment (PPE) in the laboratory for students of Health Analyst Diploma Study Program, University of MH Thamrin
Method: This research study is descriptive analytic with cross sectional design. A sample of 328 Health Analyst Diploma Study Program students with the dependent variable was compliance with PPE use and independent variables were predisposing factors (knowledge, attitude), enabling factors (availability of PPE, comfort PPE), reinforcement factors (student colleagues, supervision, regulation, sanctions) . Analysis was carried out by logistic regression
Results: Respondents who obeyed PPE were 227 (69.2%) and those who did not comply with PPE were 101 (30.8%). There was no significant relationship between predisposing factors: knowledge (OR = 1.73), attitudes (OR = 1.15), enabling factors: availability of PPE (OR = 0.63), comfort of PPE (OR = 2.74), reinforcement factors: student associates (OR = 2.74), supervision (OR = 1.17), regulations (OR = 0.25), sanctions (OR = 0.82).
Conclusions and suggestions: The most dominant variable related to compliance with the use of PPE was knowledge with OR = 1.73 which means that students with high APD knowledge had a 1.73 times higher chance of adhering to PPE compared to students whose knowledge of APD was low. For further research to be added with qualitative techniques."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2019
T52692
UI - Tesis Membership  Universitas Indonesia Library
cover
Galih Respati Pradana Mukti
"Skripsi ini membahas bagaimana gambaran sistem manajemen keselamatan dan kesehatan kerja (SMK3) di PT X, sebuah perusahaan kontraktor pertambangan batu bara dilihat dari tingkat kematangan budaya keselamatan dan kesehatan kerja yang ada di PT X. Penelitian dilakukan dengan pendekatan semi-kuantitatif dengan desain studi cross-sectional pada pekerja level pelaksana dan middle management bulan Oktober 2012. Variabel-variabel kematangan budaya K3 nantinya akan dikelompokkan ke dalam siklus PDCA OHSAS 18001 dan dilihat mana yang masih perlu diperbaiki, mana yang perlu ditingkatkan. Hasil penelitian menunjukkan siklus Perencanaan, Implementasi, Pemeriksaan, dan Tindakan perbaikan masih perlu diperbaiki di beberapa poin untuk mencapai continuous improvement.

The focus of this study is how occupational health and safety management system can be seen by safety culture maturity model in PT X, a mining contractor. This research is semi-quantitative descriptive interpretative with cross-sectional study design in front line workers and middle management in October 2012. The variables of safety culture maturity is grouped in PDCA cycle of OHSAS 18001 and we can see which one is need to be maintenance and which one is need to be improved. The result of this research is there is something in whether Plan, Do, Check, and Action cycle that need to be improved to reach the continuous improvement state."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2013
S44337
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dela Aptika Gusani
"Penelitian ini membahas analisis risiko keselamatan dan kesehatan kerja di Penyamakan Kulit X tahun 2012. Penelitian mengacu pada standar AS/NZS 4360:2004 dengan menggunakan analisis risiko semikuantitatif. Penilaian risiko menggunakan metode W.T Fine yaitu nilai risiko merupakan hasil kali antara faktor konsekuensi, pajanan dan kemungkinan. Tujuan dari skripsi ini adalah untuk mendapatkan nilai risiko keselamatan dan kesehatan pada setiap tahapan proses di Penyamakan Kulit X.
Hasil penelitian adalah tingkat risiko keselamatan dan kesehatan kerja pada setiap tahapan proses meliputi very high, priority 1, substantial, priority 3 dan acceptable. Hasil penelitian dapat menjadi dasar pertimbangan program pengendalian risiko di Penyamakan Kulit X.

This research describes risk assessment of occupational health and safety in Tannery X 2012. This study referred to AS/NZS 4360:2004 standard and used semi-quantitative risk analysis. Risk Assessment used W.T Fine method. Risk score was got from multiplication of the consequence, exposure and probability factors. The objective of this study is to get health and safety level of risk in every step process in Tannery X.
The results state the level of risk in every step process includes very high, priority 1, substantial, priority 3 and acceptable. This results can use for judgment of risk control program in Tannery X.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2012
S-Pdf
UI - Skripsi Open  Universitas Indonesia Library
cover
Muhammad Raihan Rachmat
"Sektor konstruksi merupakan salah satu sektor yang strategis dan krusial dalam perkembangan ekonomi dan infrastruktur di Indonesia. Dalam pelaksanaannya, penerapan SMKK dalam proyek sangatlah penting, dimana rendahnya penerapan SMKK dapat berdampak pada peningkatan angka kecelakaan kerja di sektor kosntruksi. Rendahnya penerapan SMKK dapat berdampak pada penundaan pelaksanaan proyek, penambahan biaya proyek, rusaknya reputasi Perusahaan, dan berkurangnya produktivitas kerja. Pada penerapan SMKK, alat pelindung diri merupakan salah satu komponen krusial. Pada Peraturan Menteri PUPR Nomor 8 Tahun 2023, pemerintah memerintahkan perhitungan biaya SMKK untuk setiap jenis pekerjaan pada proyek konstruksi. Namun, tidak tersedia metode perhitungan APD yang merupakan salah satu komponen biaya SMKK. Oleh karena itu, penelitian ini bertujuan untuk merumuskan merumuskan metode perhitungan jumlah kebutuhan APD pada proyek konstruksi. Pada penelitian ini, penulis memfokuskan perumusan metode perhitungan jumlah kebutuhan APD pada APD jenis full body protection yang mencakup perlengkapan selam, rubber safety shoes, toe cap shoes, penunjang seluruh tubuh, jaket pelampung, ban pelampung, rompi keselamatan, sabuk pengaman, celemek, dan pelindung jatuh.

The construction sector is one of the strategic and crucial sectors in the development of the economy and infrastructure in Indonesia. In its implementation, the application of Occupational Health and Safety Management (SMKK) in projects is extremely important, where the low implementation of SMKK can impact the increase in workplace accidents in the construction sector. The low application of SMKK can result in project delays, increased project costs, damage to the company's reputation, and reduced work productivity. In the application of SMKK, personal protective equipment (PPE) is one of the crucial components. In Regulation of the Minister of Public Works and Public Housing Number 8 of 2023, the government mandated the calculation of SMKK costs for each type of work in construction projects. However, there is no available method for calculating PPE, which is one of the components of SMKK costs. Therefore, this research aims to formulate a method for calculating the required quantity of PPE in construction projects. In this study, the author focuses on formulating a method for calculating the quantity of PPE needed for full-body protection, including diving equipment, rubber safety shoes, toe cap shoes, full-body harness, life jackets, floaters, safety vests, safety belts, aprons, and fall protection."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tizi Dzul Khair
"Confined space merupakan tempat kerja berisiko tinggi yang dapat menyebabkan kematian. Dalam dua tahun terakhir terjadi kecelakaan kerja terkait confined space di industri migas, salah satunya pada kontraktor di PT.X yang mengakibatkan 4 fatalities. Hasil audit Det Norske Veritas (DNV) tahun 2012, terdapat temuan terkait kurangnya training pada kontraktor di PT.X, termasuk pekerjaan confined space.
Penelitian ini bertujuan untuk melakukan identifikasi bahaya menggunakan Job Hazard Analysis (JHA), penilaian risiko basic risk level, existing/ residual risk level dan predictive risk level menggunakan teknik analisis risiko semikuantitatif dengan Formula Matematika Fine (1971) dan monitoring implementasi kontrol risiko di lapangan menggunakan Job Safety Observation (JSO) pada pekerjaan confined space entry cleaning tangki penampungan kondensat di SP Pasir Jadi PT. X, Jawa Barat tahun 2012. Desain studi penelitian adalah cross sectional dengan metode deskriptif analitik.
Hasil confined space survey teridentifikasi lima jenis permit required confined space di area SP Pasir Jadi. Hasil identifikasi bahaya dan analisis risiko teridentifikasi 31 bahaya dengan 21 bahaya memiliki tingkat risiko yang tidak dapat diterima. Hasil monitoring implementasi kontrol risiko menggunakan JSO selama 3 hari kepada 11 orang pekerja, didapatkan temuan unsafe sebanyak 168 dan non- applicable adalah 0.

Confined space's categorized as a high risk workplace which can cause fatality. In last 2 years at oil and gas industries happend accidents related to confined space, one of them happened to PT.X's contractor causing 4 fatalities. Det Norske Veritas (DNV)'s audit in 2012 found that there was lack of training on contractor of PT.X, including confined space entry's job.
The objectives of this research are identify hazard using Job Hazard Analysis (JHA), assess basic, existing/ residual and predictive risk level using semiquantitative technique of Fine Mathematic Formula (1971), and monitoring the implementation of risk control at the field using Job Safety Observation (JSO) to the confined space entry's job condensate storage tank cleaning at SP Pasir Jadi PT.X year 2012. Design study of the research is cross sectional with descriptive analytic method.
Confined space survey identified that there are 5 permit required confined space at SP Pasir Jadi. Hazard identification and risk assessment which was conducted identified 31 hazard with 21 hazard clasify having unacceptable risk level. Monitoring the implementation of risk control at the field using JSO during 3 days to 11 workers identified that there was 168 finding on unsafe and 0 finding on non-acceptable.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2012
S-Pdf
UI - Skripsi Open  Universitas Indonesia Library
cover
Sumbung, Johny
"Penelitian ini merupakan penelitian non eksperimental dengan pendekatan "cross sectional" menggunakan teknik analisis data kuantitatif. Pengambilan data dilakukan dengan cara melakukan wawancara terstruktur, menggunakan kuesioner dan observasi langsung, serta mengkaji data sekunder yang sudah ada di pabrik kayu lapis PT Jati Dharma Indah Kota Batu Gong Kota Ambon. Data yang diperoleh kemudian diolah secara statistik menggunakan teknik analisis distribusi frekuensi, uji chi-square, serta analisis regresi logistik.
Penelitian ini dilaksanakan di pabrik kayu lapis PT Jati Dharma Indah Batu Gong Kota Ambon dengan unit analisis pekerja di bagian Dryer dan Gluing sebanyak 204 orang sebagai sampel, dengan tujuan untuk mendapatkan gambaran tentang penggunaan APD serta mengetahui faktor-faktor yang berhubungan dan paling besar pengaruhnya terhadap penggunaan APD. Hasil penelitian ini diperoleh 27,9 % menggunakan APD dan 72,1 % tidak menggunakan APD secara lengkap. Berdasarkan analisis bivariat ternyata ada hubungan antara variabel pola pengawasan, kebijakan, pengetahuan, terhadap penggunaan APD di bagian Dryer dan Gluing, sedangkan faktor fasilitas APD, pelatihan, sikap, tidak ada hubungan dengan penggunaan APD. Begitu pula dengan analisis regresi logistik pada variabel pola pengawasan, kebijakan, pengetahuan yang diduga mempunyai konstribusi paling besar terhadap penggunaan APD, ternyata faktor pola pengawasan yang berhubungan dengan penggunaan APD dengan nilai p = 0,0015.
Dengan melihat fasilitas APD, pelatihan, sikap, maka untuk peningkatan penggunaan APD perlu dikaji kembali maka pola pengawasan yang sudah ada terutama petugas pengawasnya, serta perlu dipikirkan keseimbangan antara pemberian sangsi dan penghargan bagi tiap tenaga kerja.

Research for the usage of Personal Protective Equipment in Dryer and Gluing section of PT. Jati Dharma Indah, a Timber Company at Batu Gong, AmbonThis research is a non experiment research with "Cross section" using technique analysis quantitative data. With structure interview, the data was collected using questionnaire and direct observation along with existing data from PT Jati Dharma Indah. Then the collected data was statically processed using a frequency technique analysis distribution, chi-square study and regression logistic analysis.
This research was resembled at PT Jati Dharma Indah, using the 204 worker's as an example. To get a view of the usage of PPE along with the most influence factors of the PPE usage. The result of this research was 27, 9% using PPE and 72, 1% was not. Based on bivariate analysis results, there are connection between variable base care, knowledge experience, against the usage of PPE in Dryer and Gluing section, even though the facility factor, training, attitude, has no connection with the usage of PPE. Also with the logistic regression on base variable supervision, guidance, knowledge, which was predicted to have the biggest contribution to PPE usage, obviously the connection of base factor supervision and the usage of PPE was p = 0,001 5.
To observe the PPE facility, enough training and attitude, therefore the increase of PPE usage needs to be reviewed. Therefore the existing base supervision especially the supervisor, including the needs of harmonization between sanction and appreciation to each employees.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2000
T7896
UI - Tesis Membership  Universitas Indonesia Library
cover
Suzi Alfiah
"Skripsi ini membahas tentang penilaian risiko kegiatan operasi dan produksi PT PGE Area Lahendong tahun 2012. Penilaian risiko dilakukan dengan analisis menggunakan metode W. T Fine yang mana tingkat risiko hasil dari perkalian konsekuensi, pajanan dan kemungkinan.
Tujuan dari skripsi ini untuk mendapatkan tingkat risiko masing-masing pekerjaan Operasi dan Produksi. Penelitian ini adalah penelitian deskriptif mengacu pada standar AS/NZS 4360:2004.
Hasil penelitian adalah tingkat risiko pada pekerjaan Operasi dan Produksi meliputi very high, priority 1, substantial, priority 3 dan acceptable yang akan menjadi dasar pertimbangan pengendalian risiko dan dasar pembuatan keputusan pada manajemen risiko.

This research describes risk assessment for Operation and Production task in PT PGE Area Lahendong 2012. The risk analysis use the method of W. T. Fine which results of level of risk from the multiplication the consequences, exposure and probability.
The objectives of this study are the risk level of each task of Operation and Production. The study was a descriptive study refers to the standard AS/NZS 4360:2004.
The results of analysis are the level of risk in Operation and Production includes very high, priority 1, substantial, priority 3 and acceptable to the risk control and decision making on the basis of risk management.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2012
S-Pdf
UI - Skripsi Open  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>