Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 68441 dokumen yang sesuai dengan query
cover
Septhian Marno
"Biodiesel (fatty acid methyl ester) telah diproduksi secara komersial melalui reaksi transesterifikasi minyak nabati dengan metanol menggunakan katalis alkali. Tetapi katalis alkali ini mempunyai beberapa kelemahan, seperti terjadinya reaksi pembentukan sabun, katalis yang bercampur homogen, dan proses pemurnian produk inilah yang menyebabkan harga biodiesel menjadi cukup mahal. Untuk mengatasi hal tersebut dikembangkan sintesis biodiesel menggunakan enzim lipase sebagai biokatalis. Biokatalis ini merupakan katalis heterogen, sehingga pemisahannya dari produk setelah reaksi berakhir dapat dilakukan dengan mudah. Namun, lipase terdeaktivasi oleh alkohol. Oleh karena itu, perlu dikembangkan metode baru untuk meningkatkan aktivitas dan stabilitas lipase dalam proses sintesis biodiesel. Metode baru yang akan dikembangkan adalah dengan cara mengganti alkohol dengan alkil asetat yang sama-sama berfungsi sebagai pensuplai alkil.
Pada skripsi ini, penulis akan meneliti konsentrasi biodiesel (mol/L) yang terbentuk dari reaktan alkil asetat menggunakan biokatalis Candida rugosa dalam bentuk tersuspensi, lipase terimmobilisasi metode adsorpsi, dan lipase terimmobilisasi dalam bentuk sol-gel (Novozym 435). Menyelidiki pengaruh biokatalis terhadap konsentrasi biodiesel yang dihasilkan. Untuk lipase yang terimmobilisasi akan di uji stabilitasnya. Reaksi dilakukan dalam reaktor batch dan analisa sampel menggunakan HPLC. Berikutnya adalah melakukan pemodelan secara sederhana terhadap laju konsentrasi biodiesel yang terbentuk untuk menentukan nilai Km dan Vmax reaksi menggunakan persamaan Michaelis-Menten.
Hasil penelitian menunjukan bahwa konsentrasi biodiesel terbesar yang dihasilkan adalah 15.02 (mol/L) mengunakan biokatalis Novozym 435. Namun untuk % yield biodiesel terbesar adalah 86.55 % yang dihasilkan menggunakan biokatalis dalam bentuk tersuspensi dengan rasio mol minyak : metil asetetat adalah 1:12. Konsentrasi biokatalis terbesar yang digunakan yaitu 4 (% wt) terbukti menghasilkan konsentrasi biodiesel yang terbesar pula. Untuk uji stabilitas lipase terimmobilisasi, dilihat dari % yield biodiesel terbentuk setelah 3 kali penggunaan reaksi, maka immobilisasi metode adsorpsi mempunyai stabilitas yang lebih baik dibandingkan dengan immobilisasi metode sol-gel (Novozym 435), dengan nilai % yield biodiesel terbentuk adalah 17.79% untuk metode adsorpsi dan 11.82 % untuk Novozym 435. Hasil penelitian kemudian dimodelkan menggunakan metode linierisasi Michaelis-Menten dengan nilai Vmax terbesar yaitu 0.0784 dan nilai Km terbentuk yaitu 12.975 yang didapat dari hasil sintesis biodiesel menggunakan lipase terimmobilisasi pada sol-gel (Novozym 435).

The current biodiesel production processed commercially through transesterification of vegetabel oil with methanol using alkaline catalysts. Although conventional chemical technology using alkaline catalysts has been applied to biodiesel fuel production, there are several drawbacks to this approach, including saponification reaction occurs, the need for removal of catalyst, and.difficulties of this purity process at the end makes biodiesel price become expensive. The utilization of lipase in biodiesel production is considered as an effective means of circumventing these problems. However, effective methanolysis reactions using lipase have been developed, excess methanol would lead to inactivation of lipase and the lipase stability was poor. Hence, that's needed a new method to enhance the activity and stability of the lipase significantly.
In this paper, a new method is developed by replacing alcohol reaction route to non-alcohol reaction route. Methanol as acyl acceptor would be substituted by methyl acetate for biodiesel production. In this paper, biodiesel concentration (mol/L) that formed with alkyl acetate using different biocatalyst, Candida rugosa lipase in suspension form, immmobilized lipase with adsorpsi method, and immobilized lipase on acrylic resin (Novozym 435), will be observed. Then, the effect of biocatalyt to biodiesel cocentration (mol/L) formed will be studied too. Moreover, the stablitity of immobilized lipase will be tested. This eksperimental do in batch reactor and sample analyzed by HPLC. Additionally, result of this research will be modeled with Michealis-Menten mechanism through linierization method to find Vmax and Km value.
The result of this research shows that the highest biodiesel concentration is 15.02 (mol/L) which's obtained from Novozym 435 as biocatalyst. However, the highest % yield biodiesel formed is 86.55 % achieved from lipase in suspension form as biocatalyst with molar rasio oil to methyl acetat is 1:12. The highest biocatalyts concentrarion which used in this research is 4 (%wt) resulting the highest biodiesel concentration formed. For stability test toward immobilized lipase which have number of cycles 3 times for reaction, analyzed through % yield biodiesel resulted, shows that immobilized lipase with adsorption method have better stability than Novozym 435, which % yield biodiesel resulted is 17.79% for immobilized lipase with adsorption method and 11.82 % for Novozym 435. Then, result of this research is modeled by michaelis-menten mechanism with the highest value of Vmax = 0.0784 dan Km = 12.975 whih's obtained from Novozym 435 as biocatalyst.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S49676
UI - Skripsi Open  Universitas Indonesia Library
cover
Muhammad Ekky Rizkiyadi
"Metil asetat sebagai pensuplai gugus alkil direaksikan dengan trigliserida dari minyak jelantah dalam reaktor batch. HPLC digunakan untuk menganalisa reaktan dan produk. Hasil penelitian ini menunjukkan Candida rugosa mampu mengkonversi 75% rantai asam lemak dari trigliserida minyak jelantah menjadi biodiesel yang dihasilkan menggunakan biokatalis dalam bentuk tersuspensi pada kondisi biokatalis sebesar 4% wt substrat, rasio mol minyak/alkil sebesar 1:12 selama 50 jam reaksi. Uji stabilitas menunjukkan bahwa biokatalis terimobilisasi ini masih memiliki aktivitas untuk tiga kali siklus reaksi. Uji efek inhibisi diperoleh % yield terbesar 28.30% untuk lipase tersuspensi sedangkan untuk uji variasi diperoleh % yield terbesar 26.49% pada temperatur 50ºC untuk lipase tersuspensi. Model kinetika berbasis Michaelis Menten mampu menggambarkan reaksi ini dengan ditandai hasil fitting yang cukup memuaskan dengan data hasil eksperimen.

In this reaction, methyl acetate is reacted with triglyceride from fried palm oil in batch reactor. The reactants and products were analyzed using HPLC. The result showed that Candida rugosa lipase can convert 75% fatty acid from triglyceride in Fried palm oil to biodiesel under the condition of 4% wt of the biocatalyst concentration, oil/alkyl mole ratio equal to 1:12 in 50 hour reaction. Stability test indicate that the activity of the immobilized biocatalyst still remain after three reaction cycles. The maximum yield of methyl ester for inhibition test was 28.30% achived from lipase in suspension form and the maximum yield for temperature variation test was 26.49% gained in temperature of 50ºC from lipase in suspension form. Kinetic model based on Michaelis Menten mechanism can describe this reaction with comparing experiment data result to fitting data result."
Depok: Fakultas Teknik Universitas Indonesia, 2008
S52202
UI - Skripsi Open  Universitas Indonesia Library
cover
Risan Aji Surendro
"Biodiesel telah menarik perhatian sebagai sumber energi alternatif. Biodiesel telah diproduksi secara komersial melalui reaksi transesterifikasi antara minyak nabati dengan metanol menggunakan katalis alkali. Tetapi katalis alkali ini mempunyai beberapa kelemahan, seperti terjadinya reaksi pembentukan sabun akibat bereaksinya katalis alkali dengan asam lemak bebas. Selain itu katalis yang bercampur homogen juga mengakibatkan kesulitan dalam pemurnian produk.
Metode baru yang akan dikembangkan adalah rute non alkohol. Rute non alkohol bisa dilakukan dengan cara mengganti alkohol dengan metil asetat yang sama-sama berfungsi sebagai pensuplai alkil. Hasil penelitian menunjukan bahwa konsentrasi biodiesel terbesar yang dihasilkan adalah 3.0764 (mol/L) mengunakan biokatalis Porcine Pancreatic. Namun untuk % yield biodiesel terbesar adalah 59.08 % yang dihasilkan menggunakan biokatalis dalam bentuk tersuspensi dengan rasio mol minyak : metil asetat adalah 1:12.

The current biodiesel production processed commercially through transesterification of vegetabel oil with methanol using alkaline catalysts. Although conventional chemical technology using alkaline catalysts has been applied to biodiesel fuel production, there are several drawbacks to this approach, including saponification reaction occurs, the need for removal of catalyst, and.difficulties of this purity process at the end makes biodiesel price become expensive.
In this paper, a new method is developed by replacing alcohol reaction route to non-alcohol reaction route. Methanol as acyl acceptor would be substituted by methyl acetate for biodiesel production. The result of this research shows that the highest biodiesel concentration is 3.0764 (mol/L) which’s obtained from Porcine Pancreatic as biocatalyst. However, the highest % yield biodiesel formed is 59.08 % achieved from lipase in suspension form as biocatalyst with molar rasio oil to methyl acetat is 1:12.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S52261
UI - Skripsi Open  Universitas Indonesia Library
cover
Jeremia Jan Chandra Pranata
"ABSTRAK
Sintesis biodiesel dengan elektrolisis plasma sangatlah menjanjikan. Penelitian ini bertujuan mendapatkan efisiensi yang tinggi dalam sintesis biodiesel dari minyak kelapa sawit dengan metode elektrolisis plasma katodik. Bahan baku adalah minyak kelapa sawit, metanol, dan katalis KOH. Variasi percobaan meliputi kedalaman katoda, rasio molar minyak dengan metanol, tegangan operasi, dan penambahan gelembung udara. Yield tertinggi yang didapat adalah 98,76 pada kondisi kedalaman katoda 3 cm, rasio molar minyak-metanol 1:24, tegangan operasi 460 volt, dan tanpa gelembung udara. Efisiensi energi terbaik adalah 604 J/ml pada kondisi kedalaman katoda 3 cm, rasio molar minyak-metanol 1:24, tegangan operasi 300 volt, dan tanpa gelembung udara. Efisiensi proses yang tinggi terbukti mampu didapatkan dengan penggunaan plasma katodik. Hasil ini menunjukkan bahwa metode elektrolisis plasma katodik efektif digunakan dalam sintesis biodiesel.

ABSTRACT
Synthesis of biodiesel by using plasma electrolysis is very promising. This study aims to obtain high efficiency in the synthesis of biodiesel from palm oil by using cathodic plasma electrolysis method. The raw materials are palm oil, methanol, and KOH catalyst. Variations consist of cathode depth, oil methanol molar ratio, operating voltage, and the addition of air bubbles. The highest yield of 98.76 is obtained on the condition of cathode depth of 3 cm, oil methanol molar ratio of 1 24, operating voltage of 460 volts, and without air bubbles. The best energy efficiency of 604 J ml is obtained on the condition of cathode depth of 3 cm, oil methanol molar ratio of 1 24, operating voltage of 300 volts, and without air bubbles. High process efficiency is proved to be obtained by the use of cathodic plasma. These results indicate that cathodic plasma electrolysis method is effective to be used in the synthesis of biodiesel."
2017
S68235
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bella Nadhillah Rachmania
"Biodiesel merupakan bahan bakar pembakaran yang bersih yang dihasilkan dari minyak nabati, atau lemak hewan. Biodiesel diproduksi dengan trans-esterifikasi minyak dengan alkohol rantai pendek. Reaksi trans-esterifikasi mengubah trigliserida menjadi alkil ester asam lemak, dengan adanya alkohol, seperti metanol, dan katalis, dengan gliserol sebagai produk samping. Reaktor kolom pancaran ini dirancang untuk mengatasi masalah dalam reaksi sintesis biodiesel, salah satunya adalah pencampuran 2 reaktan dengan perbedaan viskositas yang besar, yaitu minyak kelapa sawit yang kental dengan metanol yang encer.
Dalam studi ini, salah satu variabel bebas adalah rasio mol metanol dan minyak kelapa sawit dengan variasi 3,75:1, 4,5:1, 5,25:1 dan 6:1. Variabel bebas lainnya adalah jenis jet, yaitu circular nozzle dan notched nozzle. Hasil tertinggi dari yield biodiesel yang dihasilkan pada rasio mol 6:1 sebesar 96,83% pada notched nozzle. Sedangkan untuk rasio mol 6:1 pada circular nozzle menghasilkan yield biodiesel sebesar 75,06%. Dengan menggunakan notched nozzle pada rasio mol 5,25:1, konversi lebih besar dibandingkan dengan circular nozzle pada rasio 6:1, yaitu 81,01%. Oleh karena itu, dengan menggunakan notched nozzle pada kolom pancaran dapat menghemat biaya pemisahan metanol di industri, dimana metanol lebih konvensional digunakan untuk menghasilkan konversi yang tinggi.

Biodiesel is a clean-burning fuel produced from vegetable oils, or animal fats. Biodiesel is produced by trans-esterification of oils with short-chain alcohols. The trans-esterification reaction consists of transforming triglycerides into fatty acid alkyl esters, in the presence of an alcohol, such as methanol, and a catalyst, with glycerol as a byproduct. A jet column reactor was designed to overcome problems in biodiesel synthesis reaction, one of which is mixing of 2 reactants of large viscosity difference, i.e. viscous of CPO and dilute methanol.
In this study, one of the free variables is the mole ratio of methanol to CPO which variation is 3.75:1; 4.5:1; 5.25:1 and 6:1. The other free variable is jet types, i.e. circular and notched nozzles. The highest yield of biodiesel produced at mole ratio 6 to 1 was reported to yield is 96.83% in notched nozzle. While to the mole ratio 6 to 1 on a circular nozzle produce yield of biodiesel is 75.06 %. By using notched nozzle at mole ratio 5.25 to 1, conversion is greater compared to that of a circular nozzle ratio 6 to 1, i.e. 81.01 %. Therefore, by using notched nozzle on jet columns can save the cost separation of methanol in industry, in which more methanol conventionally is used to produce high conversion.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S47285
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhamad Yulianto
"Pemanfaatan biodiesel sawit diselidiki memiliki masalah dengan sifat aliran dingin terutama di daerah dataran tinggi yaitu titik kabut tinggi karena tingginya kadar asam lemak jenuh. Di sisi lain, minyak mikroalga memiliki titik kabut yang rendah karena tingginya tingkat asam lemak tak jenuh. Sementara itu, densitas dan kadar air biodiesel yang terlalu tinggi akan mempengaruhi kinerja mesin. Oleh karena itu, kombinasi sifat tak jenuh tunggal dan jenuh, maupun perbedaan densitas antara minyak kelapa sawit dan minyak mikroalga membuatnya lebih disukai sebagai campuran bahan baku untuk meningkatkan kualitas Biodiesel. Penelitian ini memformulasikan pencampuran minyak mikroalga Nannochloropsis sp (MO1) dan/atau minyak mikroalga Chlorella vulgaris (MO2) terhadap minyak sawit (PO). Skema pencampuran minyak dilakukan dengan 4 variasi yaitu perbandingan massa 0:30 (MO:PO); 1:30 (MO1:PO); 1:30 (MO2:PO); 1:1:30 (MO1:MO2:PO).Transesterifikasi terjadi pada 65°C dengan penambahan katalis KOH dengan perbandingan minyak : metanol (1 : 15) : @250 mL selama 1,5 jam. FAME dianalisis berdasarkan SNI 7182:2015 dengan tiga parameter utama diantaranya kadar air (ASTM D6304), densitas (ASTM D1298), dan titik kabut (ASTM D2500). Berdasarkan penelitian yang dilakukan dari semua variasi menunjukkan bahwa hasil terbaik yang direkomendasikan adalah komposisi campuran minyak mikroalga Chlorella vulgaris terhadap minyak sawit dengan parameter densitas dan titik kabut masing – masing sebesar 859,3 kg/m3 dan 11,7°C (sesuai SNI), meskipun parameter kadar air masih tinggi sebesar 973,4 mg/kg (tidak sesuai SNI).

Utilization of palm biodiesel is investigated having problems with the cold flow properties particularly in the high-altitude areas. A common problem of biodiesel is the high cloud point due to high levels of saturated fatty acids. On the other hand, microalgae oil has a low cloud point due to high levels of unsaturated fatty acids. Meanwhile, the density and moisture content of biodiesel that is too high will also affect engine performance. Therefore, the combination of monounsaturated and saturated properties, as well as differences in density between palm oil and microalgae oil make it preferred as a mixture of raw materials to improve the quality of Biodiesel. This research formulated the mixing of Nannochloropsis sp (MO1) microalgae oil and/or Chlorella vulgaris (MO2) microalgae oil to palm oil (PO). The oil mixing scheme is carried out with 4 variations namely mass ratio 0:30 (MO: PO); 1:30 (MO1: PO); 1:30 (MO2: PO); 1: 1: 30 (MO1: MO2: PO). The transesterification occurred at 65°C with the addition of KOH catalyst with oil : methanol (1 : 15) : @250 mL during 1,5 hours. The FAMEs were analysis according to SNI 7182:2015 with three main parameters including water content (ASTM D 6304), density (ASTM D1298), and cloud point (ASTM D 2500). Based on research conducted from all variations shows that the best results recommended are the composition of a mixture of Chlorella vulgaris microalgae oil to palm oil with the density and fog point parameters respectively 859.3 kg/m3 and 11.7 °C (according SNI), although the water content parameter is still high at 973.4 mg/kg (not according SNI)."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Gultom, Okto Riristina
"Berkurangnya sumber daya bahan bakar fosil ditambah dengan peningkatan konsumsi energi, menyebabkan produksi bahan bakar menjadi tidak seimbang tingkat konsumsinya. Untuk itu perlu dilakukan pengembangan sumber bahan bakar alternatif yang berasal dari tanaman. Minyak kelapa sawit dan jelantah banyak digunakan sebagai bahan utama biodiesel karena kelimpahan material serta harga yang terjangkau. Pada penelitian ini dilakukan sintesis biodiesel pada minyak kelapa sawit dan jelantah dengan metode elektrolisis menggunakan sel elektrokimia dua kompartemen yang dilengkapi dengan elektroda Boron Doped Diamond sebagai katoda. Membran Nafion ditempatkan diantara kompartemen sel sebagai pemisah.
Elektrolisis dilakukan pada campuran minyak kelapa sawit, metanol dan tetrahidrofuran. Selain itu sebanyak 2% air (b/b) ditambahkan ke dalam campuran. Ion hidroksil (OH-) dari hasil elektrolisis air dalam katoda diharapkan dapat mengkatalisis pembentukan ion metoksi (CH3O-) yang berperan dalam pembentukan biodiesel jenis fatty acid metil ester (FAME). Sebagai elektrolit digunakan Na2SO4 atau tetra butyl ammonium perklorat (TBAP). Hasil elektrolisis dianalisis dengan metoda kromatografi gas. Setelah proses elektrolisisselama 2,5 jam, hasil yang diperoleh sebagai %FAME sebesar 7,7% untuk minyak kelapa sawit dan 6,5% untuk minyak jelantah.

Fossil fuels resources shortages as well as the increase of energy consumption resulting in an unbalance fuel production against the consumption level. In this case, the fuel production is way lower than the fuel consumption. Therefore, it is necessary to develop an alternative fuel sources derived from plants. For instance, palm oil and waste cooking oil, which are widely used as the main source for biodiesel due to its availability and affordable price. In this research, the synthesis of biodiesel using palm oil and waste cooking oil by electrolysis method equipped with two compartements electrochemical cell and a boron doped diamond electrode as the cathode was performed. Nafion® membrane was placed between the cell compartements as the separator.
The electrolysis was performed in palm oil mixture, methanol, tetrahydrofuran, and 2% water (%w/w). The hydroxyl ions (OH-)product from the electrolysis of water in the cathode is expected to catalyze the formation of methoxy ion (CH3O-) which plays the role in the formation of Fatty Acid Methyl Esther (FAME). Na2SO4 or tetrabutylammonium percholrate (TBAP) were used as the electrolyte. The biodesel product was analyzed by gas chromatrography method. After 2,5 hour electrolysis process, the results showed the FAME conversion of palm oil was 7,7 % and was 6,5 % for the used cooking oil.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
T42677
UI - Tesis Membership  Universitas Indonesia Library
cover
Syarah Anliza
"Etil ester asam lemak dapat diperoleh melalui reaksi transesterifikasi dan interesterifikasi minyak sawit. Reaksi transesterifikasi dan interesterifikasi dilakukan secara enzimatik menggunakan lipase Candida rugosa bebas dan yang terimobilisasi pada partikel nano Fe3O4-polidopamin. Nilai persen loading imobilisasi yang diperoleh adalah 78%. Lipase bebas memiliki aktivitas spesifik sebesar 13,81 U/mg, sedangkan lipase terimobilisasi sebesar 2,86 U/mg. Lipase imobilisasi memberikan efisiensi sebesar 21% dengan penurunan aktivias 79%. Partikel Nano Fe3O4-Polidopamin dan lipase terimobilisasi dikarakterisasi menggunakan FTIR, FESEM, EDS, PSA, dan XRD. Pelarut yang digunakan pada reaksi transesterifikasi dan interesterifikasi yaitu t-butanol, metil isobutil keton, dan n-heksan. Hasil etil ester asam lemak dianalisis dengan GC-FID. Persen komposisi tertinggi pada transesterifikasi dengan katalis lipase bebas dan lipase terimobilisasi sebesar 5,59% dan 3,21% dalam pelarut metil isobutil keton. Sementara itu, Persen komposisi tertinggi pada interesterifikasi dengan katalis lipase bebas dan lipase terimobilisasi sebesar 2,15% dan 1,46% dengan pelarut metil isobutil keton. Enzim terimobilisasi dalam reaksi transesterifikasi dan interesterifikasi dapat digunakan tiga kali pengulangan. Setelah tiga kali pengulangan, aktivitas menurun 61%.Transesterifikasi dan interesterifikasi berlangsung dalam pelarut metil isobutil keton.

Fatty acid ethyl ester is produced by either transesterification and interesterification between palm oil and ethanol or ethyl acetat as reactants. Transesterification and interesterification were enzim-catalized using immobilized Candida rugosa lipase on Fe3O4-polydopamine. Loading percentage of immobilized lipase was 78%. Free lipase had specific activity about 13.81U/mg, while immobilized lipase of 2.86 U/mg. Immobilization lipase gave efficiency of 21% with a decrease in the specific activity of 79%. Fe3O4-polidopamin nanoparticle have been characterized using FTIR, FESEM, EDS, PSA, and XRD. Variation of solvents used for reaction were t-butanol, methyl isobutyl ketone, and n-hexane. Analysis of fatty acid ethyl ester was performed by GC-FID. The highest composition of transesterification using free lipase and immobilized lipase, with methyl isobutyl ketone as solvent, were 5.59% and 3.21%, respectively. Meanwhile, highest composition percentage of interesterification using free lipase and immobilized lipase were 2.15% and 1.46%, using methyl isobuthyl ketone. Immobilized enzyme in transesterification and interesterification can use three times recycle. After third recycle, the presentation of relative activity decreased 61%. Transesterification and interesterification took place in methyl isobuthyl ketone as solvent."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
T44093
UI - Tesis Membership  Universitas Indonesia Library
cover
Fairuz Nawfal Hamid
"ABSTRAK
Biodiesel merupakan metil ester hasil proses transesterifikasi dari trigliserida dengan suatu sumber alkil. Tetapi pada proses transesterifikasi pada umumnya akan terbentuk produk samping berupa gliserol. Gliserol dapat menjadi pengotor pada biodiesel yang harus dipisahkan melalui sebuah proses separasi sebelum biodiesel dapat digunakan. Pada penelitian ini, akan diproduksi biodiesel berbahan baku minyak kelapa sawit dan dimethyl carbonate DMC yang akan direaksikan di dalam reaktor. Selain itu, juga akan dibuat biodiesel dengan variasi katalis enzim lipase pada proses transesterifikasinya. Tujuan dari penelitian ini adalah memperoleh produk biodiesel non-gliserol dengan sumber alkil dimethyl carbonate pada reaksi transesterifikasinya, memperoleh produk biodiesel dengan katalis enzim pada reaksi transesterifikasinya, mendapatkan kondisi pembentukan biodiesel terbaik dengan variabel rasio mol alkil : minyak, dan memperoleh biodiesel dengan kualitas terbaik, diukur dari karakteristik viskositas, densitas, dan titik kabut. Metode penelitian yang dilakukan adalah dengan mereaksikan minyak kelapa sawit dengan DMC untuk mendapatkan biodiesel non-gliserol, serta mereaksikan minyak dengan methanol dan katalis enzim lipase. Variasi yang diberikan adalah rasio DMC:minyak pada sintesis biodiesel non-gliserol dan rasio methanol:minyak pada sintesis biodiesel secara enzimatik. Produk biodiesel kemudian diukur yieldnya dengan menggunakan Gas Chromatography, kemudian biodiesel dilakukan pengujian viskositas, densitas, dan titik kabut untuk dibandingkan dengan standar biodiesel yang sudah ditetapkan. Produk biodiesel yang dihasilkan memiliki kadar yang cukup tinggi tanpa produk samping gliserol sehingga tidak perlu ada tahapan pemurnian dan biodiesel dapat langsung digunakan, serta memiliki kualitas sebaik biodiesel yang sudah komersial dengan pengukuran beberapa karakteristik.

ABSTRAK
Biodiesel is a methyl ester transesterification process result of triglyceride with an alkyl source such as alcohol. However, the transesterification process would formed byproducts such as glycerol. Glycerol is an impurities in biodiesel which must be separated before biodiesel is used. In this research, will be produced biodiesel made from palm oil and dimethyl carbonate DMC to be reacted. Also, biodiesel will be made with lipase as the catalyst in the transesterification process. The purpose of this research is to gain non glycerol biodiesel product with dimethyl carbonate as the reagent, to gain biodiesel product with enzyme catalyst in the transesterification process, to obtain the best biodiesel product with variation of molar ratio between the alkyl and the oil, and to obtain the best biodiesel quality seen by four characteristics methyl ester yield, density, viscosity, and cloud point . The research method is to react the palm oil with DMC to gain the non glycerol biodiesel product, and to react the palm oil with methanol and lipase. Variations given is the molar ratio of DMC oil in the non glycerol biodiesel production, and molar ratio of methanol oil in the enzymatic biodiesel production. The yield of produced biodiesel is then measured using Gas Chromatography, then the methyl ester yield, viscosity, density, and cloud point are tested to compare between the produced biodiesel and the standard that has been set. The expected result of this research biodiesel is to produce methyl ester with high yield without a byproduct glycerol so there is no more purification stages and biodiesel can be directly used, as well as having biodiesel product with good quality like the commercial biodiesel product."
2017
S68064
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ari Kabul Paminto
"Indonesia masih menjadi importir energi terutama dalam bentuk minyak mentah dan produk BBM. Berkurangnya produksi energi fosil dan komitmen pengurangan emisi gas rumah kaca, mendorong pemerintah Indonesia untuk mendukung peran energi baru dan terbarukan. Produksi biodiesel berbasis minyak sawit dihadapkan pada sejumlah masalah lingkungan dari pelepasan emisi. Tujuan penelitian ini adalah menyusun LCI produksi biodiesel, menganalisis dampak lingkungan yang meliputi emisi CO2(eq), acidification dan eutrophication dan menyusun konsep daur hidup produksi biodiesel dari minyak sawit. Metode penelitian ini yaitu kuantitatif (LCA-AHP) dan kualitatif. Hasil dari penelitian ini adalah LCI dalam 1 ton biodiesel terdiri dari tandan buah segar 5,67 ton, CPO 1,17 ton dan POME 3,47 m3. Total emisi CO2(eq) sebesar 1489 Kg CO2(eq), eutrophication 1,115 Kg PO43(eq) dan acidification 3,058 Kg SO2(eq). Konsep daur hidup produksi biodiesel dapat diterapkan dengan pemanfaatan limbah POME.

Indonesia is still an energy importer, especially in the form of crude oil and fuel products. Reducing fossil energy production and commitments to reduce greenhouse gas emissions encourage the Indonesian government to support the role of new and renewable energy. The production of palm oil-based biodiesel is faced with several environmental problems from releasing emissions. The purpose of this study was to develop LCI for biodiesel production, analyze environmental impacts including CO2(eq), acidification and eutrophication emissions and develop a life cycle concept for biodiesel production from palm oil. This research method is quantitative (LCA-AHP) and qualitative. The results of this study are LCI in 1 ton of biodiesel consisting of 5.67 tons of fresh fruit bunches, 1.17 tons of CPO; and POME 3.47 m3. The total emission of CO2(eq) is 1489 Kg CO2(eq), eutrophication 1.115 Kg PO43-(eq) and acidification 3.058 Kg SO2(eq). The concept of a biodiesel production life cycle can be applied by utilizing POME waste."
Jakarta: Sekolah Ilmu Lingkungan Uiniversitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>