Hasil Pencarian  ::  Simpan CSV :: Kembali

"Polymer composites are increasingly used in aerospace applications due to properties such as strength and durability compared to weight. Edited by two leading authorities in the field, this book summarises key recent research on design, manufacture and performance of composite components for aerospace structures. Part one reviews the design and manufacture of different types of composite component. Part two discusses aspects of performance such as stiffness, strength, fatigue, impact and blast behaviour, response to temperature and humidity as well as non-destructive testing and monitoring techniques."

"Saat ini, karena masalah lingkungan, ketersediaan dan keterbaruan, pengembangan komposit polimer berpenguat serat alam meningkat. Serat kenaf Sumberejo merupakan salah satu serat alam yang melimpah di Indonesia. Penelitian ini bertujuan untuk memperoleh sifat mekanik komposit berpenguat serat kenaf Sumberejo anyam menggunakan model analitik dengan memvariasikan jenis polimer pada komposit. Orientasi serat anyam dengan perlakuan alkali adalah 0^o/90^o. Polimer yang digunakan adalah polimer termoset (epoksi dan vinil ester) dan termoplastik (polipropilena dan poli asam laktat). Rule of Mixtures (ROM) dan Teori Lamina diterapkan sebagai model analitik. Hasil menunjukkan bahwa nilai modulus tarik, kuat tarik longitudinal, kuat tarik transversal, modulus geser, dan kuat geser komposit tertinggi terdapat pada komposit epoksi berpenguat serat kenaf Sumberejo, masing-masing yaitu 6,58 GPa, 131,04 MPa, 114,93 MPa, 1,78 GPa, dan 8,92 MPa. Mengacu pada Standar Nasional Indonesia 01-4449-2006 tentang papan serat komposit, keempat komposit polimer berpenguat serat kenaf Sumberejo anyam 0^o/90^o digolongkan sebagai papan serat kerapatan tinggi.

---

Nowadays, due to environmental concerns, availability and renewable issues, the development of natural fiber reinforced polymer composites is increasing. Sumberejo kenaf fiber is one of the abundant natural fibers in Indonesia. The purpose of this study was to obtain the mechanical properties of woven Sumberejo kenaf fiber composite using analytical models by varying the types of polymers in the composite. The orientation of the woven alkaline-treated fiber was 0^o/90^o. Polymers used were thermosets (epoxy and vinyl esters) and thermoplastics (polypropylene and polylactic acid). Rule of Mixtures (ROM) and Lamina Theory were applied for the analytical model. The results showed that the highest value of tensile modulus, longitudinal tensile strength, transverse tensile strength, shear modulus, and shear strength were found in Sumberejo kenaf fiber reinforced epoxy composite, 6,58 GPa, 131,04 MPa, 114,93 MPa, 1,78 GPa, and 8,92 MPa respectively. Referring to Indonesian National Standard 01-4449-2006 for composite fiber board, four 0^o/90^o woven Sumberejo kenaf fiber reinforced polymer composites were classified as high density fiber board."

"Glass fibre reinforced polymer (GFRP) komposit, diantara serat penguat material lain, merupakan serat yang sangat ekonomis dan dan menawarkan fleksibilitas yang luas berguna bagi para insinyur. Kekuatan dan kekakuan mereka dapat disesuaikan dengan porsi bahan penguat. Kendati manfaat ini, industri konstruksi mengalami kesulitan mengadopsi teknologi ini karena kekuatannya rendah modulus, perilaku jangka panjang, proses produksi yang mahal dan tidak adanya standar desain. Penelitian lebih lanjut harus berkonsentrasi pada daya tahan dan peningkatan perlawanan mereka terhadap suhu tinggi. Standar desain divalidasi juga harus diproduksi untuk meningkatkan penggunaan komposit GFRP oleh industri konstruksi.

---

Glass fibre reinforced polymer (GFRP) composites, among the other fibre reinforcing materials, is the least expensive fibre, and it offers extensive flexibility of use to the engineers. Their strength and stiffnesses can be customised by the portion of reinforcing material. Despite these benefits, the construction industry has difficulty adopting this technology because of its low-modulus strength, long term term behaviour, expensive production process and the absence of design standards. Further research must concentrate on the durability and improvement of their resistance to elevated temperatures. Validated design standards must also be produced to enhance the use of GFRP composites by the construction industry."

"Serat tandan kosong kelapa sawit (TKKS) merupakan limbah tanaman kelapa sawit yang berlimpah di Indonesia. Serat ini merupakan serat alam yang dapat digunakan sebagai penguat di dalam komposit polimer, namun masalah utama dari serat alam adalah hidrofilik sedangkan polimer propilena sebagai matriks adalah hidrofobik. Perlakuan kimia alkalinisasi merupakan perlakuan kimia yang dapat meningkatkan kompatibilitas serat dan sifat mekanis yang dihasilkan pada pembentukan komposit. Metode pengujian yang dilakukan untuk mengetahui bentuk serat di dalam struktur komposit menggunakan Scanning Electron Microscope (SEM) dan kemudian diolah menggunakan perangkat lunak ImageJ. Alkalinisasi dapat meningkatkan distribusi serat di dalam komposit dinyatakan dalam bentuk rasio distribusi hingga 0,42 pada serat 50 mesh dan 0,40 pada serat 100 mesh. Selain itu, kompatibilitas serat juga meningkat ditunjukkan oleh selisih tegangan permukaan yang menurun hingga 1.60 mN/m. Hasil pengujian dibentuk dalam purwa-rupa aplikasi sebagai contoh manfaat mengetahui pengaruh secara kuantitatif yaitu dapat memprediksi sifat-sifat yang dihasilkan.

---

Oil Palm Empty Fruit Bunch (OPEFB) Fiber is an abundant waste in Indonesia. This fiber is a natural fiber that can be used for reinforcement in polymer-based composites, but natural fiber is hydrophilic while polypropylene as a matrix are hydrophobic. Alkalinization is a type of chemical treatment that can improve fiber compatibility and mechanical properties resulting in the formation of composites. Testing methods conducted to determine the shape of the fibers in the composite structure are using Scanning Electron Microscope (SEM) and then processed using ImageJ software. Alkalinization can increase fiber distribution in composites expressed in the form of distribution ratio up to 0,42 for 50 mesh and 0,40 for 100 mesh. In addition, the compatibility of the fiber also increases, indicated by the differences in surface tension decreased to 1,60 mN/m. The test results are formed in the prototype of application that can be used for an example of the benefits of knowing the influence quantitatively so that can be able to predict the resulting properties.

---

"

"Machining of metal matrix composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, chapter 7 is dedicated to computational methods and optimization in the machining of MMCs."